e10vk
Table of Contents

 
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
Form 10-K
 
     
(Mark one)    
þ
  ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
    For the fiscal year ended October 28, 2007
or
o
  TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
    For the transition period from          to          
 
Commission file number 000-06920
 
Applied Materials, Inc.
(Exact name of registrant as specified in its charter)
 
     
Delaware
  94-1655526
(State or other jurisdiction of
incorporation or organization)
  (I.R.S. Employer
Identification No.)
     
3050 Bowers Avenue, P.O. Box 58039
Santa Clara, California
  95052-8039
(Zip Code)
(Address of principal executive offices)
   
 
Registrant’s telephone number, including area code:
(408) 727-5555
 
Securities registered pursuant to Section 12(b) of the Act:
 
     
Title of Each Class
 
Name of Each Exchange on Which Registered
 
Common Stock, par value $.01 per share
  The NASDAQ Stock Market LLC
Rights to Purchase Series A Junior Participating Preferred Stock
  The NASDAQ Stock Market LLC
 
Securities registered pursuant to Section 12(g) of the Act:
None
 
Indicate by check mark if the registrant is a well-known, seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes þ     No o
 
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes o     No þ
 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes þ     No o
 
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  o
 
Indicate by check mark whether the registrant is a large, accelerated filer, an accelerated filer, or a non-accelerated filer.
Large, accelerated filer þ     Accelerated filer o     Non-accelerated o
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes o     No þ
 
Aggregate market value of the voting stock held by non-affiliates of the registrant as of April 27, 2007, based upon the closing sale price reported by the NASDAQ Global Select Market on that date: $26,577,503,014
 
Number of shares outstanding of the registrant’s Common Stock, $.01 par value, as of November 27, 2007: 1,382,752,583
 
DOCUMENTS INCORPORATED BY REFERENCE:
 
Portions of the definitive Proxy Statement for Applied Materials, Inc.’s Annual Meeting of Stockholders to be held on March 11, 2008 are incorporated by reference into Part III of this Form 10-K.
 


Table of Contents

 
Caution Regarding Forward-Looking Statements
 
This Annual Report on Form 10-K (report or Form 10-K) of Applied Materials, Inc. and its subsidiaries (Applied or the Company), including “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7, contains forward-looking statements. All statements in this Annual Report, including those made by the management of Applied, other than statements of historical fact, are forward-looking statements. Examples of forward-looking statements include statements regarding Applied’s future financial results, operating results, cash flows and cash deployment strategies, business strategies, projected costs, products, competitive positions, management’s plans and objectives for future operations, research and development, acquisitions and joint ventures, growth opportunities, investments and legal proceedings, as well as industry trends. These forward-looking statements are based on management’s estimates, projections and assumptions as of the date hereof and include the assumptions that underlie such statements. Forward-looking statements may contain words such as “may,” “will,” “should,” “could,” “would,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “predict,” “potential” and “continue,” the negative of these terms, or other comparable terminology. Any expectations based on these forward-looking statements are subject to risks and uncertainties and other important factors, including those discussed in Item 1A, “Risk Factors,” below and elsewhere in this report. Other risks and uncertainties may be disclosed in Applied’s prior Securities and Exchange Commission (SEC) filings. These and many other factors could affect Applied’s future financial condition and operating results and could cause actual results to differ materially from expectations based on forward-looking statements made in this document or elsewhere by Applied or on its behalf. Applied undertakes no obligation to revise or update any forward-looking statements.
 
The following information should be read in conjunction with the Consolidated Financial Statements and the accompanying Notes to Consolidated Financial Statements included in this report.


 

 
APPLIED MATERIALS, INC.
 
FORM 10-K FOR THE FISCAL YEAR ENDED OCTOBER 28, 2007
 
TABLE OF CONTENTS
 
             
        Page
 
  Business     1  
  Risk Factors     13  
  Unresolved Staff Comments     18  
  Properties     18  
  Legal Proceedings     19  
  Submission of Matters to a Vote of Security Holders     19  
 
  Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities     20  
  Selected Financial Data     21  
  Management’s Discussion and Analysis of Financial Condition and Results of Operations     22  
  Quantitative and Qualitative Disclosures About Market Risk     37  
  Financial Statements and Supplementary Data     38  
  Changes in and Disagreements with Accountants on Accounting and Financial Disclosure     38  
  Controls and Procedures     38  
  Other Information     39  
 
  Directors, Executive Officers and Corporate Governance     41  
  Executive Compensation     41  
  Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters     41  
  Certain Relationships and Related Transactions, and Director Independence     43  
  Principal Accounting Fees and Services     43  
 
  Exhibits and Financial Statement Schedules     44  
    Signatures     88  
 EXHIBIT 10.46
 EXHIBIT 10.47
 EXHIBIT 10.48
 EXHIBIT 10.49
 EXHIBIT 10.50
 EXHIBIT 10.51
 EXHIBIT 10.52
 EXHIBIT 10.53
 EXHIBIT 10.54
 EXHIBIT 21
 EXHIBIT 23
 EXHIBIT 24
 EXHIBIT 31.1
 EXHIBIT 31.2
 EXHIBIT 32.1
 EXHIBIT 32.2


Table of Contents

 
PART I
 
Item 1:   Business
 
Incorporated in 1967, Applied, a Delaware corporation, provides Nanomanufacturing Technologytm solutions for the global semiconductor, flat panel display, solar and related industries, with a broad portfolio of innovative equipment, service and software products. “Nanomanufacturing” is the production of ultra-small structures, including the engineering of thin layers of film onto substrates. Applied’s customers include manufacturers of semiconductor chips and wafers, flat panel liquid crystal displays (LCDs), photovoltaic (PV) cells and other electronic devices, who use what they manufacture in their own end products or sell the items to other companies for use in advanced electronic components. The Company’s fiscal year ends on the last Sunday in October.
 
Applied is the world’s largest semiconductor fabrication equipment supplier, based on revenue, with the capability to provide global deployment and support services. Applied also is a global leader in LCD fabrication equipment, and is gaining momentum to become a leading supplier of PV manufacturing solutions to the emerging solar industry.
 
Applied operates in four reportable segments: Silicon, Fab Solutions, Display, and Adjacent Technologies. A summary of financial information for each reportable segment is found in Note 10 of Notes to Consolidated Financial Statements. A discussion of factors that could affect Applied’s operations is set forth under “Risk Factors” in Item 1A, which is incorporated herein by reference.
 
Silicon Segment
 
Applied’s Silicon Systems Group (SSG), reported under its Silicon segment, develops, manufactures and sells a wide range of manufacturing equipment used to fabricate semiconductor chips or integrated circuits. Most chips are built on a silicon wafer base and include a variety of circuit components, such as transistors and other devices, that are connected by multiple layers of wiring (interconnects). Applied offers systems that perform most of the primary steps in the chip fabrication process, including: atomic layer deposition (ALD), chemical vapor deposition (CVD), physical vapor deposition (PVD), etch, rapid thermal processing (RTP), chemical mechanical planarization (CMP), wafer wet cleaning, and wafer metrology and inspection, as well as systems that etch, measure and inspect circuit patterns on masks used in the photolithography process. Applied’s semiconductor manufacturing systems are used by both integrated device manufacturers and foundries to build memory, logic and other types of chips.
 
To build a chip, the transistors, capacitors and other circuit components are first created on the surface of the wafer by performing a series of processes to deposit and selectively remove successive film layers. Similar processes are then used to build the layers of wiring structures on the wafer. As the density of the circuit components increases to enable greater computing power in the same or smaller area, the complexity of building the chip also increases, necessitating more process steps to form smaller structures and more intricate wiring schemes. A typical, simplified process sequence for building the wiring portion of chips involves initially depositing a dielectric film layer onto the base layer of circuit components using a CVD system. An etch system is then used to create openings and patterns in the dielectric layer. To form the metal wiring, these openings and patterns are subsequently filled with conducting material using PVD and/or electroplating technologies. A CMP step then polishes the wafer to achieve a flat surface. Additional deposition, etch and CMP steps are then performed to build up the layers of wiring needed to complete the interconnection of the circuit elements to form the chip. Advanced chip designs require about 500 steps involving these and other processes to complete the manufacturing cycle.
 
A significant portion of the process steps used in chipmaking are performed to build the interconnect, a complex matrix of microscopic wires that carry electrical signals to connect the transistor and capacitor components of a chip. While some customers building memory chips are still using aluminum as the main conducting material for the interconnect, logic customers have transitioned to copper. Copper has lower resistance than aluminum and can carry more current in a smaller area. Applied is the leading supplier of systems for manufacturing copper-based chips, and supplies systems for depositing, etching and planarizing the copper interconnect layers. Complementing the transition to copper to improve chip speed is the use of low dielectric constant (low k) films to replace silicon dioxide material as the insulator between the copper wiring structures. Applied leads the industry in providing systems for depositing low k dielectric films.


1


Table of Contents

The transistor is another key area of the chip in which semiconductor manufacturers are improving their device designs to enhance speed. Applied has the industry’s largest portfolio of technically advanced products for building smaller and faster transistors. One such area is strain engineering, a technique that stretches or compresses the space between atoms, allowing electrical current to flow more quickly, thus greatly enhancing chip performance. Multiple strain films are typically used in advanced devices since they have an additive effect on increasing transistor speed. Applied has a comprehensive portfolio of systems to enable these applications using CVD and epitaxial deposition technologies.
 
Most chips currently are fabricated using 65 nanometer (nm) and larger linewidth dimensions. Beginning at the 45nm technology node, major chipmakers have announced they will be integrating new high dielectric constant (high-k) and metal materials and processes in the transistor gate structure to reduce current leakage and enable faster switching speed. In 2007, Applied announced a comprehensive portfolio of fully characterized processes for building these high-k/metal gates. These solutions include an integrated dielectric gate stack tool that combines four critical processes in a single system, a portfolio of metallization technologies using ALD and PVD, and an innovative high temperature etch system.
 
Most of Applied’s semiconductor equipment products are single-wafer systems with multiple process chambers attached to a base platform. This enables each wafer to be processed separately in its own environment, allowing precise process control, while the system’s multiple chambers enable simultaneous, high productivity manufacturing. Applied sells most of its single-wafer, multi-chamber systems on four basic platforms: the Centura®, the Endura®, the Producer® and the Vantage®. These platforms currently support ALD, CVD, PVD, etch and RTP technologies.
 
Over time, the semiconductor industry has migrated to increasingly larger wafers to build chips. The predominant or common wafer size used today for the volume production of advanced chips is 300 millimeter (mm), or 12-inch, wafers. Applied offers a comprehensive range of 300mm, as well as earlier-generation 200mm systems. Applied also offers products and services to support its systems, which are reported under its Fab Solutions segment.
 
The following summarizes Applied’s portfolio of products and their associated process technology areas reported under its Silicon segment.
 
Deposition
 
Deposition is a fundamental step in fabricating a chip. During deposition, layers of dielectric (an insulator), barrier, or electrically conductive (typically metal) films are deposited or grown on a wafer. Applied currently provides equipment to perform the three main types of deposition: ALD, CVD and PVD. In addition, Applied’s RTP systems can be used to perform certain types of dielectric deposition.
 
Atomic Layer Deposition
 
ALD is an advanced technology in which atoms are deposited one layer at a time to build chip structures. This technology enables customers to fabricate thin films of either conducting or insulating material with uniform coverage in sub-nanometer sized structures. Applied offers ALD chambers for depositing tungsten, tantalum nitride and high-k films. The Applied Endura iCuBStm product is the industry’s first system to integrate ALD and PVD chambers on a single platform for depositing critical barrier and seed layers in copper interconnects. The Applied Centura iSprinttm Tungsten system (iSprint) combines an ALD chamber, which deposits a tungsten nucleation film, with a CVD tungsten bulk fill process in one system. The iSprint is used to form contact structures that connect the transistors to the wiring areas of the chip. Applied’s high-k ALD process is part of the Centura Advanced Gate Stack system which enables a single integrated solution for building high-k/metal gate structures.
 
Chemical Vapor Deposition
 
CVD is used by customers to deposit dielectric and metal films on a wafer. During the CVD process, gases that contain atoms of the material to be deposited react on the wafer surface, forming a thin film of solid material. Films deposited by CVD may be silicon oxide, single-crystal epitaxial silicon, amorphous silicon, silicon nitride,


2


Table of Contents

dielectric anti-reflective coatings, low k dielectric (for highly efficient insulating materials), aluminum, titanium, titanium nitride, polysilicon, tungsten, refractory metals or silicides. Applied offers the following CVD products and technologies:
 
The Applied Centura Ultima HDP-CVD® system — High-density plasma CVD (HDP-CVD) is used to fill very small, deep spaces (gap-fill) with dielectric film. This product is used by a number of major integrated circuit manufacturers for gap-fill applications, including the deposition of silicon oxides in substrate isolation structures, contacts and interconnect.
 
The Applied Producer CVD platform — This high-throughput platform features Twin-Chambertm modules that have two single-wafer process chambers per unit. Up to three Twin-Chamber modules can be mounted on each Producer platform, giving it a simultaneous processing capacity of six wafers. Many dielectric CVD processes can be performed on this platform.
 
Low k Dielectric Films — Many integrated circuit manufacturers are now incorporating new low k dielectric materials in their copper-based chip designs to further improve interconnect speed. The Applied Producer Black Diamond® CVD low k system is used by several customers in volume production to produce some of the industry’s most advanced devices. Using conventional CVD equipment, the Black Diamond product provides customers with a proven, cost-effective way to transition to this new material. The Applied Producer Black Diamond II is a second-generation dielectric deposition system that provides a lower k-value film for building faster 65 nm generation and below chip designs. A complementary low k dielectric, called the Applied Producer BLOktm (Barrier low k), enables the complete, multi-layer dielectric structure to benefit from low k technology. In 2007, Applied introduced a second generation of this technology, the Applied Producer BLOk II, for 45nm and below applications.
 
Lithography-Enabling Solutions — Applied offers several technologies on the Producer system to help chipmakers extend their current 193nm lithography tools, including the Applied APFtm (advanced patterning film) and the Applied DARC® (dielectric anti-reflective coating) films. Together, they provide a film stack with the precise dimensional control and compatibility needed to cost-effectively pattern nano-scale features without additional integration complexity. In 2007, the Company added to its lithography-enabling solutions with the Applied Producer ACE SACVD (sub-atmospheric CVD) system for fabricating denser memory cells with double patterning techniques.
 
Strain Engineering Solutions — The Applied Producer HARP (high aspect ratio process) system plays a key role in overcoming transistor performance challenges by enabling chipmakers to boost chip speed by depositing strain inducing dielectric films in transistor structures, while also enabling geometric device scaling with high aspect ratio gap-fill capability. Offering the industry’s first integrated stress nitride deposition and ultraviolet (UV) cure solution, the Applied Producer Celera CVD delivers benchmark levels of high-stress tensile silicon nitride films. The Company also offers the Applied Centura SiNgenPlus LPCVD (low pressure CVD) system for low temperature silicon nitride films. Used together, and in conjunction with silicon germanium (SiGe) films using Applied’s epitaxial deposition technologies, these systems can provide additive strain engineering benefits.
 
Epitaxial Deposition — Epitaxial silicon (epitaxy or epi) is a layer of pure silicon grown in a uniform crystalline structure on the wafer to form a high quality base for the device circuitry. Epi technology is used in an increasing number of integrated circuit devices in both the wafer substrate and transistor areas of a chip to enhance speed. The Applied Centura Epi system integrates pre- and post-epi processes on the same system to improve film quality and reduce production costs. This system is also used for SiGe epi technology, which reduces power usage and increases speed in certain types of advanced chips. For emerging transistor designs, the Applied Centura RP Epi system offers selective epi processes to enable faster transistor switching through strain engineering techniques.
 
Polysilicon Deposition — Polysilicon is a type of silicon used to form portions of the transistor structure within the integrated circuit device. The Applied Centura Polygentm LPCVD (low pressure CVD) system is a single-wafer, multi-chamber product that deposits thin, polysilicon films at high temperatures to create transistor gate structures. To address the challenging requirements of shrinking transistor gate structures, the


3


Table of Contents

Applied Centura DPN Gate Stack system integrates chambers for decoupled plasma nitridation (DPN), RTP anneal and polysilicon deposition on one platform to enable superior film quality and material properties.
 
Aluminum Deposition — Aluminum (Al) continues to be the material used by many memory manufacturers for interconnects. The Applied Endura iFill Al CVD CVD/PVD system is used for building high-density interconnects in Flash and DRAM memory chips. This advanced process, for sub-90nm generations, enables customers to replace tungsten structures with aluminum to achieve faster chips with fewer steps and less cost.
 
Tungsten Deposition — Tungsten is used in the contact area of a chip that connects the transistors to the wiring circuitry. In aluminum-based devices, tungsten is also used in the structures that connect the multiple layers of aluminum wiring. Applied has two products for depositing tungsten: the Applied Centura Sprint® Tungsten CVD system for 90nm and below devices and the Applied Centura iSprint ALD/CVD system for more advanced applications. The latter product combines ALD technology and CVD chambers on the same platform.
 
Physical Vapor Deposition
 
PVD, also called sputtering, is a physical process in which atoms of a gas, such as argon, are accelerated toward a metal target. The metal atoms chip off, or sputter away, and are then deposited on the wafer. Applied leads the industry in PVD technology with its Applied Endura PVD system. This system offers a broad range of advanced deposition processes, including aluminum, aluminum alloys, cobalt, titanium/titanium nitride, tantalum/tantalum nitride, tungsten/tungsten nitride, nickel, vanadium and copper.
 
The Applied Endura CuBS (copper barrier/seed) PVD system is widely used by customers for fabricating copper-based chips. Using PVD technology, the system deposits critical films that prevent copper material from entering other areas of the device and primes the structure for the subsequent deposition of bulk copper. Applied Siconi pre-clean technology extends the system’s capabilities to 45nm and below copper low k interconnects.
 
The Applied Endura system’s highly flexible, multi-chamber architecture allows the integration of multiple PVD processes, or combinations of metal CVD and PVD technologies, on the same system. In addition to the integrated Applied Endura iCuBS ALD/PVD system (discussed in the Atomic Layer Deposition section), the Applied Endura iLBtm (integrated liner barrier) system combines a PVD chamber for depositing titanium with a CVD chamber for titanium nitride deposition to form critical lining layers of interconnect structures. These structures are subsequently filled with tungsten, aluminum or other materials.
 
Etch
 
Etching is used many times throughout the integrated circuit manufacturing process to selectively remove material from the surface of a wafer. Before etching begins, the wafer is coated with a light-sensitive film, called photoresist. A photolithography process then projects the circuit pattern onto the wafer. Etching removes material only from areas dictated by the photoresist pattern. Applied offers a wide range of systems for etching dielectric, metal and silicon films to meet the requirements of sub-100nm processing.
 
For dielectric applications, the Applied Centura eMax® system etches a broad range of dielectric films in the contact and interconnect regions of the chip. Applied’s Producer Etch system utilizes the Company’s Twin-Chamber Producer platform to target cost-sensitive dielectric etch applications in 90nm and below design geometries. To address advanced low k etch applications, the Applied Centura Enabler® Etch system performs etch, strip and clean steps in a single chamber. The Enabler’s all-in-one capability streamlines the process flow for advanced chip designs and significantly reduces operating costs. In 2007, the Company introduced its Applied Centura Carina system that uses innovative, high-temperature technology to deliver the etch capability essential for scaling logic and memory devices with high-k/metal gates at 45nm and below.
 
The Applied Centura AdvantEdgetm Silicon Etch system offers chipmakers high precision gate etching for advanced-generation devices. To enable customers to scale memory devices, in 2007 the Company launched its Applied Centura Mariana Trench Etch, the first system with the capability to etch 80:1 aspect ratio structures. For etching metals, Applied also introduced in fiscal 2007 the Applied Opus AdvantEdge Metal Etch. Using an


4


Table of Contents

optimized 5-chamber platform configuration, this system enables customers to extend aluminum interconnect technology and productivity to sub-70nm dimensions for Flash and DRAM memory applications.
 
Rapid Thermal Processing
 
RTP is a process in which a wafer is subjected to rapid bursts of intense heat that can take the wafer from room temperature to more than 1,000 degrees Celsius in less than 10 seconds. A rapid thermal process is used mainly for modifying the properties of deposited films. The Applied Centura Radiance®Plus and Applied Vantage RadOxtm RTP systems feature advanced RTP technology with differing platform designs. While the multi-chamber, Centura platform offers exceptional process flexibility, the streamlined two-chamber Vantage platform is designed for dedicated high-volume manufacturing. These single-wafer RTP systems are also used for growing high quality oxide and oxynitride films, deposition steps that traditional large batch furnaces can no longer achieve with the necessary precision and control. With its proprietary radical-based, oxidation process, the Applied Vantage RadOx system deposits high-performance transistor gate oxides with high productivity and low operating cost for Flash memory applications.
 
Chemical Mechanical Planarization
 
The CMP process removes material from a wafer to create a flat (planarized) surface. This process allows subsequent photolithography patterning steps to occur with greater accuracy and enables film layers to build with minimal height variations. The 300mm Applied Reflexion® LK system leads the industry in CMP technology with important features such as integrated cleaning, film measurement and process control capabilities. The 300mm Applied Reflexion LK Ecmptm system (Ecmp system) features proprietary, electrochemical mechanical planarization technology to provide a high-performance, cost-effective and extendible solution for advanced copper/low k interconnects. This Ecmp system removes bulk copper at a high rate by electric charge, making it ideal for fragile, ultra-low k films.
 
Metrology and Wafer Inspection
 
Applied offers several products for measuring and inspecting the wafer during various stages of the fabrication process:
 
Critical Dimension and Defect Review Scanning Electron Microscopes (CD-SEMs and DR-SEMs)
 
Scanning electron microscopes (SEMs) use an electron beam to form images of microscopic features, or critical dimensions (CDs), of a patterned wafer at extremely high magnification. Applied’s SEM products provide customers with full automation, along with the high accuracy and sensitivity needed for measuring very small CDs. The Applied VeritySEMtm Metrology system uses proprietary SEM imaging technology to enable precise control of the lithography and etching processes. The VeritySEM measures CDs with less than 5 angstrom precision, a requirement for 45nm device production, and incorporates automation and software advancements for significantly higher throughput in production. Applied’s OPC Checktm software for the VeritySEM system performs automated qualification of OPC-based (optical proximity correction) chip designs, significantly reducing mask (see Mask Making section below) verification time over conventional manual methods.
 
DR-SEMs review defects on the wafer (such as particles, scratches or residues) that are first located by a defect detection system and then classify the defects to identify their source. The high-throughput, fully automatic Applied SEMVisiontm G3 Defect Analysis products enable customers to use this technology as an integral part of their production lines to analyze defects as small as 30nm with industry-leading throughput. The Applied SEMVision G3 FIB integrates advanced defect review SEM capability with automated focused ion beam (FIB) technology in one system. The FIB provides a cross-sectional view of the defects reviewed by the SEM, enabling chipmakers to analyze the defects in minutes as part of their in-line review process.
 
Wafer Inspection
 
Using laser-based technology, defects can be detected on patterned wafers (wafers with printed circuit images) as they move between processing steps. Defects include particles, open circuit lines, and shorts between lines.


5


Table of Contents

Incorporating key advances in imaging technology, the Applied ComPlus 3Ttm Inspection system, for darkfield applications, detects defects in devices with design rules of 65nm and below with the high speed required for customers’ volume production lines. The Applied UVisiontm Inspection system is the industry’s first laser-based, three dimensional brightfield tool. Utilizing multi-beam, deep ultraviolet (DUV) laser illumination and high efficiency detectors, the UVision system uncovers previously undetectable defects on the wafer, enabling customers to rapidly resolve defect issues and achieve greater chip yields.
 
Mask Making
 
Masks are used by photolithography systems to transfer microscopic circuit designs onto wafers. Since an imperfection in a mask may be replicated on the wafer, the mask must be virtually defect-free. Applied provides systems for etching, measuring and inspecting masks. In 2007, the Company introduced the Applied Tetra III Advanced Reticle Etch system, an advanced etch tool for fabricating masks, based on Applied’s production-proven, decoupled plasma source (DPS) wafer etch technology.
 
Fab Solutions Segment
 
Through Applied Global Services group, reported under its Fab Solutions segment, Applied provides products and services designed to improve the performance and productivity and reduce the environmental impact of the fab operations of semiconductor, LCD and solar cell manufacturers. The in-depth expertise and best known methods of Applied’s extensive global support infrastructure enable Applied to continuously support customers’ production requirements. Approximately 2,450 trained customer engineers and process support engineers are deployed in more than a dozen countries. These engineers are usually located at or near customers’ fab sites and service over 22,000 installed Applied systems, as well as non-Applied systems. Applied offers three general types of services:
 
Fab Services — Applied offers a portfolio of fab-wide operations services to maintain and optimize customers’ fabrication facilities. Applied Genuine Parts are spare parts manufactured to Applied’s strict technical specifications and quality standards. Applied Services provides customers with optimized tool performance for improved total cost of ownership and a higher return on investment. Through its Metron Chamber Performance Services unit, Applied is the industry’s leading provider of critical parts cleaning, coating refurbishment and analytical testing capabilities. In 2007, Applied announced the opening of its Advanced Wafer Reclaim Center in Taiwan. Using state-of-the-art manufacturing systems and software at this center, Applied can extend the lifecycle of silicon test wafers by over 45% and reduce customers’ costs.
 
Equipment Services — Applied provides remanufactured and refurbished systems, system enhancements and technical training, which are intended to optimize customers’ cost of ownership by increasing the efficiency and extending the life of their equipment. Applied also offers energy-saving solutions through its Metron EcoSystm products, the semiconductor industry’s most comprehensive line of point-of-use abatement systems. Applied’s EcoSys systems help enable chipmakers worldwide to meet environmental goals.
 
Automation Services — Applied offers automated factory-level and tool-level control software systems for semiconductor, LCD and solar cell manufacturing facilities. In 2007, Applied expanded its portfolio of software solutions with the acquisition of Brooks Software, a division of Brooks Automation, Inc. The Brooks Software products complement Applied’s existing software applications, allowing the Company to offer customers a comprehensive computer integrated manufacturing (CIM) solution. CIM solutions improve fab operation performance and provide real-time visibility to critical production processes for fast and informed decision-making. These enterprise solutions include manufacturing execution systems (MES) to automate the production of wafers and LCD and solar substrates, advanced process control systems, and scheduling and materials handling control systems. Applied also offers computerized maintenance management systems and performance tracking, and modeling and simulation tools for improving asset utilization.
 
Display Segment
 
Applied’s subsidiary AKT, reported under the Display segment, designs, manufactures and sells and services equipment to fabricate thin film transistor LCDs for televisions, computer displays and other consumer-oriented electronic applications. While similarities exist between the technologies utilized in chipmaking and LCD


6


Table of Contents

fabrication, the most significant differences are in the size and composition of the substrate. Substrates used to manufacture LCD panels can be more than 70 times larger in area than 300mm wafers and are made of glass, while wafers are made of silicon. AKT also develops, manufactures and supports differentiated stand-alone equipment for the Applied SunFabtm Thin Film Line, discussed further under the Adjacent Technologies segment.
 
Applied supplies a wide range of systems that process and test different glass substrate sizes. To meet growing consumer demand for larger, more cost-efficient LCD TVs, LCD manufacturers have moved to larger-sized substrates. Applied’s latest Generation (Gen) 8.5 systems can process substrates sized at 2.2 x 2.5 meters, which in turn enable the production of up to six 55-inch LCD TV screens.
 
For fabricating the transistor layer of Gen-8.5 panels, Applied offers the AKT-55K PECVD (plasma-enhanced CVD) system that uses multi-chamber platform architecture to deposit dielectric and semiconducting films. In 2007, the Company launched the AKT-PiVottm 55KV system, which employs high-productivity, cost-efficient PVD technology to deposit metal and transparent conductive oxide films on the substrate. For manufacturing the color filter layer of LCD panels, Applied offers a fully automated, vertical sputtering system, the AKT-NEW ARISTOtm 2200.
 
Complementing these systems, Applied also offers electron beam systems for testing substrates during production for defective pixels and other imperfections. The AKT-55K EBT is a Gen-8.5 tester that features one of the industry’s fastest and most accurate pixel test technology with the lowest operating cost. The electron beam system’s non-contact test technology enables safe testing of high-value LCD TV panels without damaging or scratching the display.
 
Adjacent Technologies Segment
 
The Energy and Environmental Solutions (EES) group, reported under the Adjacent Technologies segment, provides manufacturing solutions for the generation and conservation of energy. Applied entered the solar PV market in 2006 and announced its objective to lower the overall cost per watt of solar electricity to parity with that of electricity generated by other sources, such as the burning of fossil fuels. Applied offers manufacturing solutions for both wafer-based crystalline silicon (c-Si), and glass-based thin film applications to enable customers to increase the conversion efficiency and yields of PV devices. Applied’s products include large-area platforms such as the ATONtm in-line sputtering system for high-quality deposition and high-throughput in both c-Si and thin film PV cell manufacturing, as well as processes, materials-handling technologies and fabrication services.
 
During the fourth quarter of fiscal 2007, Applied launched the Applied SunFabtm Thin Film Line, the world’s only integrated production line for manufacturing thin film silicon solar modules using 5.7 square meter (m2) glass substrates. These ultra-large panels, which are approximately four times the size of thin film solar panels offered by others in the industry, are intended for large-scale applications such as solar farms and building-integrated PV system installations. Applied has entered into multiple contracts for its SunFab line with customers in Europe and Asia, which have not yet met Applied’s order recognition policy and accordingly have not been reported as new orders.
 
Also in fiscal 2007, Applied expanded its capabilities and opportunities in the c-Si technology sector through its acquisition of HCT Shaping Systems SA, the world’s leading supplier of precision wafering systems used to make c-Si substrates. These systems reduce silicon consumption and cost by sectioning silicon ingots into ultra-thin wafers used to fabricate c-Si solar cells.
 
Other products reported in this segment include roll-to-roll vacuum web coating systems for high-performance deposition of a range of films on flexible substrates for functional, aesthetic or optical properties. Applied also offers large-area sputtering equipment for the production of low-emissivity (Low-E) and solar control architectural glass.
 
Backlog
 
Applied’s backlog increased from $3.4 billion at October 29, 2006 to $3.7 billion at October 28, 2007. Applied manufactures systems to meet demand represented by order backlog and customer commitments. Backlog includes only orders for which written authorizations have been accepted and shipment dates within 12 months have been assigned, or shipment has occurred but revenue has not been recognized, and also includes contractual service


7


Table of Contents

revenue and maintenance fees to be earned within the next 12 months. Backlog adjustments were positive for fiscal 2007 and totaled $300 million, consisting primarily of backlog obtained from acquired companies, partially offset by cancellations and currency adjustments. Customers may delay delivery of products or cancel orders prior to shipment, subject to possible cancellation penalties. Due to possible changes in delivery schedules and cancellations of orders, Applied’s backlog on any particular date is not necessarily indicative of actual sales for any succeeding period. Delays in delivery schedules and/or a reduction of backlog during any particular period could have a material adverse effect on Applied’s business and results of operations.
 
Manufacturing, Raw Materials and Supplies
 
Applied’s manufacturing activities consist primarily of procurement, assembly, test and integration of various proprietary and commercial parts, components and subassemblies (parts) that are used to manufacture systems. Products in the Silicon segment are manufactured in Austin, Texas and Rehovot, Israel. Remanufactured products in the Fab Solutions segment are produced primarily in Austin, Texas. Products in the Display segment are manufactured in Santa Clara, California, Alzenau, Germany, and Tainan, Taiwan. Products in the Adjacent Technologies segment are manufactured primarily in Alzenau, Germany, Cheseaux, Switzerland, and Santa Clara, California. Manufacturing requires raw materials, including a wide variety of mechanical and electrical components, to be manufactured to Applied’s specifications. Applied uses numerous companies to supply parts for the manufacture and support of its products. Although Applied makes reasonable efforts to assure that parts are available from multiple, qualified suppliers, this is not always possible. Accordingly, some key parts may be obtained from only a single supplier or a limited group of suppliers. Applied seeks to reduce costs and to lower the risks of production and service interruptions, as well as shortages of key parts, by: (1) qualifying and selecting alternate suppliers for key parts; (2) monitoring the financial condition of key suppliers; (3) maintaining appropriate inventories of key parts; and (4) qualifying new parts on a timely basis.
 
Research, Development and Engineering
 
Applied’s long-term growth strategy requires continued development of new products. Applied’s significant investment in research, development and engineering (RD&E) has generally enabled it to deliver new products and technologies before the emergence of strong demand, thus allowing customers to incorporate these products into their manufacturing plans at an early stage in the technology selection cycle. Applied works closely with its global customers to design systems and processes that meet their planned technical and production requirements. Product development and engineering organizations are located primarily in the United States, as well as in Europe and Israel. In addition, Applied outsources certain RD&E activities, some of which are performed outside the United States. Process support and customer demonstration laboratories are located in the United States, China, Europe and Israel.
 
Applied invested $1.1 billion (12 percent of net sales) in fiscal 2007, $1.2 billion (13 percent of net sales) in fiscal 2006 and $941 million (13 percent of net sales) in fiscal 2005 in RD&E for product development and engineering programs to create new products and to improve existing technologies and products. Applied has spent an average of 13 percent of net sales in RD&E over the last five years. In addition to RD&E for specific product technologies, Applied maintains ongoing programs for automation control systems, materials research and environmental control that have applications to its products. In fiscal 2007, Applied focused on developing systems for customers’ new chip designs with 45nm and below geometries, including systems to enable faster transistors using strain engineering and high-k metal gates, and patterning processes that will enable customers to extend their existing 193nm lithography tools through additional technology generations.
 
Marketing and Sales
 
Because of the highly technical nature of its products, Applied markets and sells products worldwide through a direct sales force. More than 84 percent of Applied’s fiscal 2007 net sales were to regions outside of the United States. Net sales to customers by region as a percentage of total net sales were: Taiwan 28 percent, Korea 19 percent, North America (primarily the United States) 16 percent, Japan 15 percent, Asia-Pacific (including China) 12 percent, and Europe 10 percent.


8


Table of Contents

General economic conditions impact Applied’s business and financial results. From time to time, the markets in which products are sold experience weak economic conditions that may negatively impact sales. Applied’s business is usually not seasonal in nature, but it is cyclical, based on capital equipment investment by major semiconductor, flat panel display and other manufacturers. These expenditures depend on many factors, including: anticipated market demand and pricing for semiconductors, LCDs, solar cells, architectural glass and other substrates; the development of new technologies; factory utilization; and global and regional economic conditions.
 
Applied manages its business and reports financial results based on the segments described above, but does not allocate certain sales and marketing costs to the segments.
 
Information on net sales to unaffiliated customers and long-lived assets attributable to Applied’s geographic regions is included in Note 10 of Notes to Consolidated Financial Statements. Samsung Electronics Co., Ltd. accounted for 12 percent of Applied’s net sales in fiscal 2007, 11 percent of Applied’s net sales in fiscal 2006, and 10 percent of Applied’s net sales in fiscal 2005. These net sales were for products in multiple reportable segments.
 
Competition
 
The industries in which Applied operates are highly competitive and characterized by rapid technological change. Applied’s ability to compete generally depends on its ability to timely commercialize its technology, continually improve its products and develop new products that meet constantly evolving customer requirements. Significant competitive factors include technical capability and differentiation, productivity and cost-effectiveness. The importance of these factors varies according to customers’ needs, including product mix and respective product requirements, applications, and the timing and circumstances of purchasing decisions. Substantial competition exists in all areas of Applied’s business. Competitors range from small companies that compete with a single product and/or in a single region, to global, diversified companies with a range of products. Applied’s ability to compete requires a high level of investment in RD&E and in marketing, sales and customer support activities. Management believes that many of Applied’s products have strong competitive positions.
 
The competitive environment for each segment is described below:
 
The semiconductor industry has been increasingly driven by consumer demand for lower-cost electronic products with increased capability and, to a lesser extent, by demand for commercial applications. As a result, products within the Silicon segment are subject to rapid changes in customer requirements, including transitions to smaller dimensions, larger wafer sizes, new materials and an increasing number of applications. While certain existing technologies may be adapted to new requirements, some applications create the need for an entirely different technical approach. The rapid pace of technological change can quickly diminish the value of current technologies and create opportunities for many existing and new competitors. Applied offers a broad portfolio of technically differentiated products that must continuously evolve to satisfy customers’ requirements in order to compete effectively. Applied allocates resources among its many product offerings and therefore may decide not to invest in an individual product to the same degree as competitors who specialize in fewer products. There are many competitors serving the semiconductor manufacturing equipment industry, with some offering a single product line and others offering multiple product lines. These competitors range from suppliers serving a single region to global, diversified companies.
 
Products and services within the Fab Solutions segment are characterized by demanding worldwide service requirements and a diverse group of numerous competitors. To compete effectively, Applied offers products and services to reduce costs, improve productivity, and lessen the environmental impact of customers’ fab operations. Significant competitive factors include productivity, cost-effectiveness, and the level of technical service and support. The importance of these factors varies according to customers’ needs and the type of products or services offered.
 
Products in the Display segment are subject to strong competition from a number of major competitors. Applied holds established market positions with its technically differentiated LCD manufacturing solutions for the PECVD, color filter (CF) sputtering and array testing, although its market position can change rapidly if it does not meet customers’ requirements. Applied introduced a new array sputtering tool in fiscal 2007. As a recent entrant, Applied faces significant competition from existing array sputtering suppliers.


9


Table of Contents

Applied’s products within the Adjacent Technologies segment compete in diverse market areas, including equipment to make solar cells, flexible electronics and energy-efficient glass. In solar, Applied offers products for two distinct technologies, c-Si wafer-based and thin film (glass) modules. As a recent entrant to the solar equipment business, Applied competes with many other companies that have more experience with solar applications. Applied also is a recent entrant to the flexible electronics equipment business, which operates in an emerging market sector characterized by diverse types of applications, customer requirements and competitors. Applied’s glass coating equipment faces significant competition from at least one established supplier and another recent market entrant.
 
Patents and Licenses
 
Management believes that Applied’s competitive position significantly depends upon the Company’s research, development, engineering, manufacturing and marketing capabilities, and not just on its patent position. However, protection of Applied’s technological assets by obtaining and enforcing intellectual property rights, including patents, is important. Therefore, Applied’s practice is to file patent applications in the United States and other countries for inventions that Applied considers significant. Applied has a substantial number of patents in the United States and other countries, and additional applications are pending for new inventions. Although Applied does not consider its business materially dependent upon any one patent, the rights of Applied and the products made and sold under its patents, taken as a whole, are a significant element of Applied’s business. In addition to patents, Applied also possesses other intellectual property, including trademarks, know-how, trade secrets and copyrights.
 
Applied enters into patent and technology licensing agreements with other companies when management determines that it is in its best interest to do so. Applied pays royalties under existing patent license agreements for the use, in several of its products, of certain patented technologies that are licensed to Applied for the life of the patents. Applied also receives royalties from licenses granted to third parties. Royalties received from or paid to third parties have not been, and are not expected to be, material to Applied’s consolidated results of operations.
 
In the normal course of business, Applied periodically receives and makes inquiries regarding possible patent infringement. In dealing with such inquiries, it may become necessary or useful for Applied to obtain or grant licenses or other rights. However, there can be no assurance that such licenses or rights will be available to Applied on commercially reasonable terms, or at all. If Applied is not able to resolve or settle claims, obtain necessary licenses on commercially reasonable terms, and/or successfully prosecute or defend its position, Applied’s business, financial condition and results of operations could be materially and adversely affected.
 
Environmental Matters
 
Two of Applied’s locations have been designated as environmental cleanup sites. In 1987, the United States Environmental Protection Agency designated one of the locations, in Santa Clara, California, as a Superfund site and named Applied as a “Responsible Party.” Cleanup activities at this site began in 1984 and were substantially completed in February 2002. The California Regional Water Quality Control Board designated Applied as a “Discharger” with respect to another site in Sunnyvale, California. Applied was named a Discharger upon its acquisition of the property in 1997 solely due to its status as property owner. The prior owners of the site and/or operators who caused the contamination are responsible for performing cleanup and monitoring activities.
 
Applied maintains a number of environmental, health and safety programs that are primarily preventive in nature. As part of these programs, Applied regularly monitors ongoing compliance and periodically conducts investigations of possible contamination.
 
Compliance with federal, state and local provisions regulating the discharge of materials into the environment, remedial agreements and other actions relating to the environment have not had, and are not expected to have, a material effect on Applied’s capital expenditures, competitive position, financial condition or results of operations.
 
The most recent report on Applied’s environmental, health and safety activities can be found on the Company’s website at http://www.appliedmaterials.com/about/environment.html. This report is updated periodically. This website address is intended to be an inactive textual reference only. None of the information contained on Applied’s website is part of this report or is incorporated by reference herein.


10


Table of Contents

Employees
 
At October 28, 2007, Applied employed 14,550 regular employees and 778 temporary employees. In the high-technology industry, competition for highly-skilled employees is intense. Applied believes that its future success is highly dependent upon its continued ability to attract, retain and motivate qualified employees. There can be no assurance that Applied will be able to attract, hire, assimilate and retain a sufficient number of qualified employees.
 
Executive Officers of the Registrant
 
The following table and notes set forth information about Applied’s executive officers:
 
     
Name of Individual
 
Position
 
James C. Morgan(1)
  Chairman of the Board of Directors
Michael R. Splinter(2)
  President, Chief Executive Officer and Director
Franz Janker(3)
  Executive Vice President, Sales and Marketing
George S. Davis(4)
  Senior Vice President, Chief Financial Officer
Manfred Kerschbaum(5)
  Senior Vice President, General Manager Applied Global Services
Mark R. Pinto(6)
  Senior Vice President, Chief Technology Officer and General Manager Energy and Environmental Solutions
Thomas St. Dennis(7)
  Senior Vice President, General Manager Silicon Systems Group
Joseph J. Sweeney(8)
  Senior Vice President, General Counsel and Corporate Secretary
Gilad Almogy(9)
  Group Vice President, General Manager Display Products and Process Diagnostics and Control Business Group
Ron Kifer(10)
  Group Vice President, Chief Information Officer, Global Information Services
Jeannette L. Liebman(11)
  Group Vice President, Global Human Resources
Menachem Erad(12)
  Group Vice President, Chief of Staff
Yvonne Weatherford(13)
  Corporate Vice President, Corporate Controller
 
 
(1) Mr. Morgan, age 69, has been Chairman of the Board of Directors of Applied since 1987. Mr. Morgan served as Applied’s Chief Executive Officer from February 1977 to April 2003, and as Applied’s President from 1976 to 1987.
 
(2) Mr. Splinter, age 57, has been President, Chief Executive Officer and a member of the Board of Directors of Applied since joining Applied in April 2003. Prior to joining Applied, Mr. Splinter worked for nearly 20 years at Intel Corporation (Intel). Most recently he was Executive Vice President and Director of the Sales and Marketing Group at Intel, responsible for sales and operations worldwide. Mr. Splinter previously held various executive positions at Intel, including Executive Vice President and General Manager of the Technology and Manufacturing Group.
 
(3) Mr. Janker, age 58, has been the head of Sales and Marketing since May 2003. Beginning in May 2003, he was Senior Vice President, Sales and Marketing, and in December 2004 he was promoted to Executive Vice President, Sales and Marketing. He served as Senior Vice President, Global Operations and Corporate Marketing beginning in December of 2002. From December 1998 to 2002, he served as Group Vice President, Corporate Marketing and Business Management. From 1982 to 1998, Mr. Janker served in a variety of sales and marketing management positions with Applied in the United States and Europe.
 
(4) Mr. Davis, age 50, was promoted to Senior Vice President, Chief Financial Officer in December 2006. Mr. Davis was appointed Group Vice President, Chief Financial Officer effective November 1, 2006. Previously, he had been Group Vice President, General Manager Corporate Business Development since February 2005. From November 1999 to February 2005, Mr. Davis served as Vice President and Corporate Treasurer, where he managed Applied’s worldwide treasury operations and was responsible for investments, tax, financial risk management, and trade and export matters. Mr. Davis joined Applied in 1999.
 
(5) Mr. Kerschbaum, age 53, has been Senior Vice President, General Manager, Applied Global Services since January 2005. He was Group Vice President, Global Operations from July 2004 to January 2005 and from


11


Table of Contents

October 2002 to May 2003. From May 2003 to July 2004, he was Group Vice President, Foundation Engineering and Operations. From March 1997 to October 2002, he held various positions in Applied Materials North America, most recently as Group Vice President, General Manager, Applied Materials North America. Mr. Kerschbaum has served in various other operations, customer service and engineering positions since joining Applied in 1983.
 
(6) Dr. Pinto, age 47, has served as Senior Vice President, Chief Technology Officer and General Manager, Energy and Environmental Solutions (formerly known as New Business and New Products) since joining Applied in January 2004. Prior to his appointment, Dr. Pinto spent 19 years with Bell Laboratories and the Lucent Microelectronics Group, which later became Agere Systems Inc., most recently as Vice President of the Analog Products Division. Dr. Pinto holds a Ph.D in Electrical Engineering from Stanford University.
 
(7) Mr. St. Dennis, age 54, was appointed Senior Vice President, General Manager, Silicon Systems Group in June 2007. Mr. St. Dennis returned to Applied in September 2005 as Senior Vice President, General Manager Etch, Cleans, Front End and Implant Product Business Groups. He previously was with Applied from 1992 to 1999, most recently as Group Vice President, Planarization and Dielectric Deposition Product Business Group, and before that as Corporate Vice President, Physical Vapor Deposition Product Business Group. From 2003 to 2005, Mr. St. Dennis was an Executive Vice President and member of the Office of the CEO of Novellus Systems, Inc. He served as President and Chief Executive Officer of Wind River Systems, Inc. from 1999 to 2003.
 
(8) Mr. Sweeney, age 59, has held the position of Senior Vice President, General Counsel and Corporate Secretary of Applied since July 2005, with responsibility for global legal affairs, intellectual property and security. From April 2002 to July 2005, Mr. Sweeney was Group Vice President, Legal Affairs and Intellectual Property, and Corporate Secretary. Mr. Sweeney joined Applied in 1993.
 
(9) Dr. Almogy, age 42, was appointed Group Vice President, General Manager, Display Products and Process Diagnostics and Control Business Group in August 2007. From July 2005 to August 2007, Dr. Almogy served as Group Vice President, General Manager, Process Diagnostics and Control Product Business Group. He was Corporate Vice President, General Manager of the group from April 2002 to July 2005, and Vice President and Co-General Manager of the group from December 2000 to April 2002. He has held various other positions since joining Applied in 1997 when Applied acquired Orbot Instruments, Ltd. Dr. Almogy holds a Ph.D in Applied Physics from the California Institute of Technology.
 
(10) Mr. Kifer, age 56, joined Applied in May 2006 as Group Vice President and Chief Information Officer, Global Information Services. Prior to his appointment, Mr. Kifer spent five years with DHL in various executive management roles, most recently as the Senior Vice President and Chief Information Officer for North America, Asia Pacific and Emerging Markets.
 
(11) Ms. Liebman, age 60, has served as Group Vice President, Global Human Resources since July 2005. Ms. Liebman served as Corporate Vice President, Global Human Resources from August 2003 to July 2005. Prior to joining Applied in 2003, Ms. Liebman held various human resources positions at Intel.
 
(12) Mr. Erad, age 59, was appointed Group Vice President, Chief of Staff in February 2005. From January 2004 to February 2005, Mr. Erad served as Group Vice President, Strategic Planning and New Technology. He served as Group Vice President, New Business and New Products Group from May 2003 to January 2004. Mr. Erad joined Applied in 2002 as Group Vice President, Strategic Planning and New Business Development.
 
(13) Ms. Weatherford, age 56, has served as Corporate Vice President, Corporate Controller since December 2004. Ms. Weatherford was Appointed Vice President, Business Operations Controller from December 2001 to December 2004, and Appointed Vice President, Financial Operations Controller from October 2000 to December 2001. She has held various other finance roles since joining Applied in 1990.
 
Available Information
 
Applied’s website is http://www.appliedmaterials.com. Applied makes available free of charge, on or through its website, its annual, quarterly and current reports, and any amendments to those reports, as soon as reasonably practicable after electronically filing such reports with, or furnishing them to, the SEC. This website address is intended to be an inactive textual reference only and none of the information contained on Applied’s website is part of this report or is incorporated by reference herein.


12


Table of Contents

 
Item 1A:   Risk Factors
 
The following factors could materially affect Applied’s business, financial condition or results of operations and should be carefully considered in evaluating the Company and its business, in addition to other information presented elsewhere in this report.
 
The industries that Applied serves are volatile and unpredictable.
 
As a supplier to the global semiconductor, flat panel display, solar and related industries, Applied is subject to business cycles, the timing, length and volatility of which can be difficult to predict and which may vary by reportable segment. The industries have historically been cyclical due to sudden changes in customers’ manufacturing capacity requirements and spending, which depend in part on capacity utilization, demand for customers’ products, and inventory levels relative to demand. The effects on Applied of these changes in demand, including end-customer demand, are occurring more rapidly. These changes have affected the timing and amounts of customers’ purchases and investments in technology, and continue to affect Applied’s orders, net sales, gross margin, contributed profit and results of operations.
 
Applied must effectively manage its resources and production capacity to meet rapidly changing demand. During periods of decreasing demand Applied’s products, Applied must be able to appropriately align its cost structure with prevailing market conditions, motivate and retain key employees, and effectively manage its supply chain. During periods of increasing demand, Applied must have sufficient manufacturing capacity and inventory to meet customer demand; attract, retain and motivate a sufficient number of qualified individuals; and effectively manage its supply chain. If Applied is not able to timely and appropriately adapt to changes in industry cycles, Applied’s business, financial condition or results of operations may be materially and adversely affected.
 
Applied is exposed to risks as a result of ongoing changes in the semiconductor and semiconductor-related industries.
 
The global industries in which Applied operates are characterized by ongoing changes, including: (1) higher capital requirements for building and operating new semiconductor and LCD fabrication plants and the resulting effect on customers’ ability to raise the necessary capital; (2) differing rates of market growth for, and capital investments by, various semiconductor device makers, such as memory (including NAND Flash and DRAM), logic and foundry, as well as LCD and solar manufacturers; (3) industry growth rates; (4) the increasing cost and decreasing affordability of research and development due to many factors, including decreasing linewidths, the increasing number of materials, applications and process steps, and the greater complexity of process development and chip design; (5) the increasing difficulty for customers to move from product design to volume manufacturing; (6) the importance of reducing the cost of system ownership, due in part to the increasing significance of consumer electronics as a driver for semiconductor and LCD demand and the related focus on lower prices; (7) varying levels of business information technology spending; (8) the heightened importance to customers of system reliability and productivity, and the effect on demand for systems as a result of their increasing productivity, device yield and reliability; (9) the growing types and varieties of semiconductors and expanding number of applications across multiple substrate sizes, resulting in customers’ divergent technical demands; (10) demand for shorter cycle times for the development, manufacture and installation of manufacturing equipment; (11) the challenge to semiconductor manufacturers of moving volume manufacturing from one technology node to the next smaller technology node, and the resulting impact on the technology transition rate and the rate of investment in capital equipment; (12) price trends for certain semiconductor devices and LCDs; (13) difficulties associated with transitioning to larger substrate sizes; and (14) the increasing importance of the availability of spare parts to assure maximum system uptime. If Applied does not successfully manage the risks resulting from the ongoing changes occurring in the semiconductor and semiconductor-related industries, its business, financial condition and results of operations could be materially and adversely affected.


13


Table of Contents

Applied must adapt its business and product offerings to respond to competition and rapid technological changes.
 
As Applied operates in a highly competitive environment, its future success depends on many factors, including the effective development, commercialization and customer acceptance of its nanomanufacturing technology equipment, service and related products. In addition, Applied must successfully execute its growth strategy, including enhancing market share in existing markets, expanding into related markets, and cultivating new markets, while constantly improving its operational performance. The development, introduction and support of a broadening set of products in more varied competitive environments have grown increasingly complex and expensive over time. Applied’s success is subject to many risks, including but not limited to its ability to timely, cost-effectively and successfully: (1) improve and/or develop new applications for existing products, adapt similar products for use by customers in different applications and/or markets with varying technical requirements, and develop new products; (2) appropriately price and achieve market acceptance of products; (3) maintain operating flexibility to enable different responses to different markets, customers and applications; (4) appropriately allocate resources, including RD&E funding, among Applied’s products and between the development of new products and the improvement of existing products; (5) accurately forecast demand and meet production schedules for its products; (6) achieve cost efficiencies across product offerings; (7) increase market share in existing markets, expand its markets and exceed the industry growth rate; (8) adapt to technology changes in related markets, such as lithography; (9) adapt to changes in value offered by companies in different parts of the supply chain; (10) qualify products for volume manufacturing with its customers; (11) implement changes in its design engineering methodology, including those that enable significant decreases in material costs and cycle time, greater commonality of platforms and types of parts used in different systems, and greater effectiveness of product life cycle management; and (12) improve its manufacturing processes. Furthermore, new or improved products may involve higher costs and reduced margins. If Applied does not successfully manage these challenges, its business, financial condition and results of operations could be materially and adversely affected.
 
The entry into new markets and industries entails additional challenges.
 
As part of its growth strategy, Applied must successfully expand into related or new markets and industries, either with its existing nanomanufacturing technology products or with new products developed internally or obtained through acquisitions. These include the emerging solar market, which Applied entered in 2006 and which is subject to ongoing changes in demand for photovoltaic (PV) products arising from, among other things, fluctuations in the cost of electric power, availability of government incentives, changes in government energy policies, the performance and reliability of PV technology, and the success of other renewable energy sources. The entry into different markets involves additional challenges, including those arising from: (1) Applied’s ability to anticipate demand and capitalize on opportunities, and avoid or minimize risks; (2) new customers and suppliers, including some with limited operating histories, uncertain and/or limited funding, and/or locations in regions where Applied does not have existing operations; (3) the adoption of new business models, such as the supply of a suite of Applied and non-Applied equipment sufficient to manufacture solar cells; (4) difficulties in production planning and execution; (5) new materials, processes and technologies; (6) Applied’s ability to drive efficiencies and cost reductions; (7) the need to attract, motivate and retain employees with skills and expertise in these new areas; (8) different service requirements; and (9) intellectual property rights of others. If Applied does not successfully manage the risks resulting from entry into new markets and industries, its business, financial condition and results of operations could be materially and adversely affected.
 
Applied is exposed to the risks of operating a global business.
 
In fiscal 2007, approximately 84 percent of Applied’s net sales were to customers in regions outside the United States. A rising percentage of Applied’s business is from customers in Asia. Certain of Applied’s RD&E and/or manufacturing facilities, as well as suppliers to Applied, are also located outside the United States, including in China. Managing Applied’s global operations presents challenges, including but not limited to, those arising from: (1) global uncertainties with respect to economic growth rates in various countries; (2) varying regional and geopolitical business conditions and demands; (3) global trade issues; (4) variations in protection of intellectual property and other legal rights in different countries; (5) concerns of U.S. governmental agencies regarding possible


14


Table of Contents

national commercial and/or security issues posed by the growing manufacturing business in Asia; (6) fluctuating raw material and energy costs; (7) variations in the ability to develop relationships with suppliers and other local businesses; (8) changes in laws and regulations of the United States (including export restrictions) and other countries, as well as their interpretation and application; (9) fluctuations in interest rates and currency exchange rates, including the weakening relative position of the U.S. dollar; (10) the need to provide sufficient levels of technical support in different locations; (11) political instability, natural disasters (such as earthquakes, floods or storms), pandemics, terrorism or acts of war in locations where Applied has operations, suppliers or sales; (12) cultural differences; (13) special customer- or government-supported efforts to promote the development and growth of local competitors; (14) shipping costs and/or delays; and (15) adverse conditions in credit markets. Many of these challenges are present in China, which is experiencing significant growth of both suppliers and competitors to Applied, and which Applied believes presents a large potential market for its products and opportunity for growth over the long term. In addition, Applied must regularly reassess the size, capability and location of its global infrastructure and make appropriate changes. These challenges may materially and adversely affect Applied’s business, financial condition and results of operations.
 
Applied is exposed to risks associated with a highly concentrated customer base in the semiconductor and flat panel display industries.
 
Applied’s semiconductor and flat panel display customer base historically has been, and is becoming even more, highly concentrated. Orders from a relatively limited number of manufacturers have accounted for, and are expected to continue to account for, a substantial portion of Applied’s net sales. In addition, the mix and type of customers, and sales to any single customer, may vary significantly from quarter to quarter and from year to year. If customers do not place orders, or they delay or cancel orders, Applied may not be able to replace the business. As Applied’s products are configured to customer specifications, changing, rescheduling or canceling orders may result in significant, non-recoverable costs. Major customers may also seek, and on occasion receive, pricing, payment, intellectual property-related, or other commercial terms that are less favorable to Applied. In addition, certain customers have undergone significant ownership changes, have outsourced manufacturing activities, and/or have entered into strategic alliances or industry consortia that have increased the influence of key semiconductor manufacturers in technology decisions made by their partners, which may result in additional complexities in managing customer relationships and transactions. These factors could have a material, adverse effect on Applied’s business, financial condition and results of operations.
 
Applied is exposed to risks associated with acquisitions and strategic investments.
 
Applied has made, and in the future intends to make, acquisitions of, and investments in, companies, technologies or products in existing, related or new markets for Applied. Acquisitions involve numerous risks, including but not limited to: (1) diversion of management’s attention from other operational matters; (2) inability to complete acquisitions as anticipated or at all; (3) inability to realize anticipated benefits; (4) failure to commercialize purchased technologies; (5) inability to capitalize on characteristics of new markets that may be significantly different from Applied’s existing markets; (6) exposure to operational risks, rules and regulations to the extent such activities are located in countries where Applied has not historically done business; (7) inability to obtain and protect intellectual property rights in key technologies; (8) ineffectiveness of an acquired company’s internal controls; (9) impairment of acquired intangible assets as a result of technological advancements or worse-than-expected performance of the acquired company or its product offerings; (10) unknown, underestimated and/or undisclosed commitments or liabilities; (11) excess or underutilized facilities; and (12) ineffective integration of operations, technologies, products or employees of the acquired companies. Applied also makes strategic investments in other companies, including companies formed as joint ventures, which may decline in value and/or not meet desired objectives. The success of these investments depends on various factors over which Applied may have limited or no control and, particularly with respect to joint ventures, requires ongoing and effective cooperation with strategic partners. Mergers and acquisitions and strategic investments are inherently subject to significant risks, and the inability to effectively manage these risks could materially and adversely affect Applied’s business, financial condition and results of operations.


15


Table of Contents

Manufacturing interruptions or delays could affect Applied’s ability to meet customer demand, while the failure to estimate customer demand accurately could result in excess or obsolete inventory.
 
Applied’s business depends on its ability to supply equipment, services and related products that meet the rapidly changing technical and volume requirements of its customers, which depends in part on the timely delivery of parts, components and subassemblies (collectively, parts) from suppliers. Some key parts may be subject to long lead-times and/or obtainable only from a single supplier or limited group of suppliers, and some sourcing or subassembly is provided by suppliers in developing regions, including China. Significant interruptions of manufacturing operations or the delivery of services as a result of: (1) the failure or inability of suppliers to timely deliver quality parts; (2) volatility in the availability and cost of materials; (3) difficulties or delays in obtaining required export approvals; (4) information technology or infrastructure failures; (5) natural disasters (such as earthquakes, floods or storms); or (6) other causes (such as regional economic downturns, pandemics, political instability, terrorism, or acts of war), could result in delayed deliveries, manufacturing inefficiencies, increased costs or order cancellations. Moreover, if actual demand for Applied’s products is different than expected, Applied may purchase more/fewer parts than necessary or incur costs for canceling, postponing or expediting delivery of parts. Any or all of these factors could materially and adversely affect Applied’s business, financial condition and results of operations.
 
The failure to successfully implement and conduct offshoring and outsourcing activities and other operational initiatives could adversely affect results of operations.
 
To better align its costs with market conditions, increase its presence in growing markets, improve its tax structure, and enhance productivity and operational efficiency, Applied conducts engineering, software development and other operations in regions outside the United States, particularly India and China, and outsources certain functions to third parties, including companies in the United States, India, China and other countries. Outsourced functions include certain engineering, manufacturing, customer support, software development, information technology support and administrative activities. The expanding role of third party providers has required changes to Applied’s existing operations and the adoption of new procedures and processes for retaining and managing these providers in order to realize the potential productivity and operational efficiencies, assure quality and protect Applied’s intellectual property. In addition, Applied has implemented several key, operational initiatives intended to improve manufacturing efficiency, including integrate-to-order, module-final-test and merge-in-transit programs. Applied also is implementing a multi-year, company-wide program to transform certain business processes, which includes transitioning to a single-vendor, enterprise resource planning (ERP) software system to perform various functions. If Applied does not effectively develop and implement its offshoring and outsourcing strategies, if required export and other governmental approvals are not timely obtained, if Applied’s third party providers do not perform as anticipated, or if there are delays or difficulties in implementing a new ERP system or enhancing business processes, Applied may not realize anticipated productivity improvements or cost efficiencies, and may experience operational difficulties, increased costs, manufacturing interruptions or delays, loss of its intellectual property rights, quality issues, increased product time-to-market and/or inefficient allocation of human resources, any or all of which could materially and adversely affect Applied’s business, financial condition and results of operations.
 
The ability to attract, retain and motivate key employees is vital to Applied’s success.
 
Applied’s success and competitiveness depend in large part on its ability to attract, retain and motivate key employees. Achieving this objective may be difficult due to many factors, including fluctuations in global economic and industry conditions, changes in Applied’s management or leadership, competitors’ hiring practices, and the effectiveness of Applied’s compensation programs, including its equity-based programs. Applied regularly evaluates its overall compensation program and makes adjustments, as appropriate, to enhance its competitiveness. If Applied does not successfully attract, retain and motivate key employees, Applied’s ability to capitalize on its opportunities and its operating results may be materially and adversely affected.


16


Table of Contents

Changes in tax rates or tax liabilities could affect results of operations.
 
As a global company, Applied is subject to taxation in the United States and various other countries. Significant judgment is required to determine and estimate worldwide tax liabilities. Applied’s future annual and quarterly tax rates could be affected by numerous factors, including changes in the: (1) applicable tax laws; (2) composition of earnings in countries with differing tax rates; or (3) valuation of Applied’s deferred tax assets and liabilities. In addition, Applied is subject to regular examination of its income tax returns by the Internal Revenue Service and other tax authorities. Applied regularly assesses the likelihood of favorable or unfavorable outcomes resulting from these examinations to determine the adequacy of its provision for income taxes. Although Applied believes its tax estimates are reasonable, there can be no assurance that any final determination will not be materially different from the treatment reflected in Applied’s historical income tax provisions and accruals, which could materially and adversely affect Applied’s results of operations.
 
Applied is exposed to various risks related to legal proceedings or claims and protection of intellectual property rights.
 
Applied from time to time is, and in the future may be, involved in legal proceedings or claims regarding patent infringement, intellectual property rights, antitrust, environmental regulations, securities, contracts, product performance, product liability, unfair competition, employment and other matters. In addition, Applied on occasion receives notification from customers who believe that Applied owes them indemnification or other obligations related to claims made against customers by third parties. These legal proceedings and claims, whether with or without merit, may be time-consuming and expensive to prosecute or defend and also divert management’s attention and resources. There can be no assurance regarding the outcome of current or future legal proceedings or claims. Applied previously entered into a mutual covenant-not-to-sue arrangement with one of its competitors to decrease the risk of patent infringement lawsuits in the future. There can be no assurance that the intended results of this arrangement will be achieved or that Applied will be able to adequately protect its intellectual property rights with the restrictions associated with such a covenant. In addition, Applied’s success depends in significant part on the protection of its intellectual property and other rights. Infringement of Applied’s rights by a third party, such as the unauthorized manufacture or sale of equipment or spare parts, could result in uncompensated lost market and revenue opportunities for Applied. Applied’s intellectual property rights may not provide significant competitive advantages if they are circumvented, invalidated, rendered obsolete by the rapid pace of technological change, or if Applied does not adequately assert these rights. Furthermore, the laws and practices of other countries, including China, Taiwan and Korea, permit the protection and enforcement of Applied’s rights to varying extents, which may not be sufficient to protect Applied’s rights. If Applied is not able to obtain or enforce intellectual property rights, resolve or settle claims, obtain necessary licenses on commercially reasonable terms, and/or successfully prosecute or defend its position, Applied’s business, financial condition and results of operations could be materially and adversely affected.
 
Applied is subject to risks of non-compliance with environmental and safety regulations.
 
Applied is subject to environmental and safety regulations in connection with its global business operations, including but not limited to: regulations related to the development, manufacture and use of its products; recycling and disposal of materials used in its products; the operation of its facilities; and the use of its real property. The failure or inability to comply with existing or future environmental and safety regulations could result in: (1) significant remediation liabilities; (2) the imposition of fines; (3) the suspension or termination of the development, manufacture, sale or use of certain of its products; (4) limitations on the operation of its facilities or ability to use its real property; and/or (5) a decrease in the value of its real property, each of which could have a material adverse effect on Applied’s business, financial condition and results of operations.
 
Applied is exposed to various risks related to the regulatory environment.
 
Applied is subject to various risks related to: (1) new, different, inconsistent or even conflicting laws, rules and regulations that may be enacted by legislative bodies and/or regulatory agencies in the countries in which Applied operates; (2) disagreements or disputes between national or regional regulatory agencies related to international trade; and (3) the interpretation and application of laws, rules and regulations. If Applied is found by a court or


17


Table of Contents

regulatory agency not to be in compliance with applicable laws, rules or regulations, Applied’s business, financial condition and results of operations could be materially and adversely affected.
 
Applied is subject to internal control evaluations and attestation requirements of Section 404 of the Sarbanes-Oxley Act.
 
Pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, Applied must include in its Annual Report on Form 10-K a report of management on the effectiveness of Applied’s internal control over financial reporting. Ongoing compliance with this requirement is complex, costly and time-consuming. If: (1) Applied fails to maintain effective internal control over financial reporting; (2) Applied’s management does not timely assess the adequacy of such internal control; or (3) Applied’s independent registered public accounting firm does not timely deliver an unqualified opinion as to the effectiveness of Applied’s internal controls, Applied could be subject to regulatory sanctions and the public’s perception of Applied may decline.
 
Item 1B:   Unresolved Staff Comments
 
None.
 
Item 2:   Properties
 
Information concerning Applied’s principal properties at October 28, 2007 is set forth below:
 
                     
            Square
   
Location
 
Type
 
Principal Use
 
Footage
 
Ownership
 
Santa Clara, CA
  Office, Plant & Warehouse   Headquarters, Marketing,     1,454,000     Owned
        Manufacturing, Distribution, Research, Development and Engineering     573,000     Leased
Austin, TX
  Office, Plant & Warehouse   Manufacturing     1,719,000     Owned
              327,000     Leased
Rehovot, Israel
  Office, Plant & Warehouse   Manufacturing, Research, Development and Engineering     442,000     Owned
Alzenau, Germany
  Office, Plant & Warehouse   Manufacturing, Research, Development and Engineering     381,000     Leased
Cheseaux, Switzerland
  Office, Plant & Warehouse   Manufacturing, Research, Development and Engineering     93,000     Leased
Xi’an, China
  Office, Plant & Warehouse   Research, Development and Engineering     120,000     Owned
Hsinchu, Taiwan
  Office & Warehouse   Customer Support     90,000     Owned
              86,000     Leased
Singapore
  Office   Customer Support     200,000     Owned
Tainan, Taiwan
  Office & Warehouse   Customer Support     148,000     Owned
Pudong, China
  Office & Warehouse   Customer Support     112,000     Leased
 
Because of the interrelation of Applied’s operations, properties within a country may be shared by the segments operating within that country. Products in the Silicon segment are manufactured in Austin, Texas and Rehovot, Israel. Remanufactured products in the Fab Solutions segment are produced primarily in Austin, Texas. Products in the Display segment are manufactured in Santa Clara, California, Alzenau, Germany, and Tainan, Taiwan. Products in the Adjacent Technologies segment are primarily manufactured in Alzenau, Germany, Cheseaux, Switzerland, and Santa Clara, California.


18


Table of Contents

In addition to the above properties, Applied leases office space for marketing, sales, engineering and customer support offices in 86 locations throughout the world: 23 in North America (principally the United States), 21 in Japan, 20 in Europe, 12 in Asia-Pacific (including China and India), 7 in Korea and 3 in Taiwan.
 
In addition, Applied owns 112 acres of buildable land in Texas that could accommodate approximately 1,708,000 square feet of additional building space, and 43 acres in California that could accommodate approximately 1,247,000 square feet of additional building space. Applied also leases: 13 acres in Taiwan that could accommodate approximately 270,000 square feet of additional building space; 10 acres in Israel that could accommodate approximately 111,000 square feet of additional building space; and 25 acres in China that could accommodate approximately 768,000 square feet of additional building space.
 
Applied considers the properties that it owns or leases as adequate to meet its current and future requirements. Applied regularly assesses the size, capability and location of its global infrastructure and periodically makes adjustments based on these assessments.
 
Item 3:   Legal Proceedings
 
The information set forth under “Legal Matters” in Note 11 of Notes to Consolidated Financial Statements is incorporated herein by reference.
 
Item 4:   Submission of Matters to a Vote of Security Holders
 
None.


19


Table of Contents

 
PART II
 
Item 5:   Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
 
The following table sets forth the high and low closing sale prices for the periods presented as reported on the NASDAQ Global Select Market (formerly the NASDAQ National Market).
 
                                 
    2006     2007  
Fiscal Year
  High     Low     High     Low  
 
First quarter
  $ 20.82     $ 16.03     $ 19.54     $ 17.08  
Second quarter
  $ 20.46     $ 17.41     $ 19.68     $ 17.61  
Third quarter
  $ 19.05     $ 14.76     $ 21.80     $ 18.40  
Fourth quarter
  $ 19.02     $ 15.12     $ 22.96     $ 18.86  
 
Applied’s common stock is traded on the NASDAQ Global Select Market under the symbol AMAT. As of November 27, 2007, there were 5,369 directly registered holders of stock.
 
During fiscal 2006, Applied’s Board of Directors declared one quarterly cash dividend in the amount of $0.03 per share and three quarterly cash dividends in the amount of $0.05 per share each. During fiscal 2007, Applied’s Board of Directors declared one quarterly cash dividend in the amount of $0.05 per share and three quarterly cash dividends in the amount of $0.06 per share each. The fourth quarterly cash dividend declared in fiscal 2007 was paid on December 6, 2007, to stockholders of record as of November 15, 2007. Dividends paid during fiscal 2006 and fiscal 2007 totaled $251 million and $306 million, respectively. Applied currently anticipates that it will continue to pay cash dividends on a quarterly basis in the future, although the declaration of any future cash dividend is at the discretion of the Board of Directors and will depend on Applied’s financial condition, results of operations, capital requirements, business conditions and other factors, as well as a determination that cash dividends are in the best interest of Applied’s stockholders.
 
The following table provides information as of October 28, 2007 with respect to the shares of common stock repurchased by Applied during the fourth quarter of fiscal 2007:
 
                                 
                      Maximum Dollar
 
                Total Number of
    Value of Shares
 
          Average
    Shares Purchased as
    that May Yet be
 
    Total Number of
    Price Paid
    Part of Publicly
    Purchased under
 
Period
  Shares Purchased     per Share     Announced Program*     the Program*  
    (Shares in
          (Shares in
    (Dollars in
 
    thousands)           thousands)     millions)  
 
Period #1
                               
(July 30, 2007 to August 26, 2007)
    3,241     $ 21.20       3,241     $ 4,131  
Period #2
                               
(August 27, 2007 to September 23, 2007)
    7,350     $ 20.89       7,350     $ 3,978  
Period #3
                               
(September 24, 2007 to October 28, 2007)
    8,506     $ 20.90       8,506     $ 3,800  
                                 
Total
    19,097     $ 20.95       19,097          
 
 
* On September 15, 2006, the Board of Directors approved a stock repurchase program for up to $5.0 billion in repurchases over the next three years, ending September 2009.


20


Table of Contents

 
Item 6:   Selected Financial Data
 
The following selected financial information has been derived from Applied’s historical audited consolidated financial statements and should be read in conjunction with the consolidated financial statements and the accompanying notes for the corresponding fiscal years:
 
                                         
Fiscal Year Ended(1)
  2003     2004     2005     2006     2007  
    (In thousands, except percentages, ratios, per share amounts and number of employees)  
 
Net sales
  $ 4,477,291     $ 8,013,053     $ 6,991,823     $ 9,167,014     $ 9,734,856  
Gross margin
  $ 1,604,455     $ 3,701,245     $ 3,085,874     $ 4,291,802     $ 4,492,443  
(% of net sales)
    35.8       46.2       44.1       46.8       46.1  
Research, development and engineering
  $ 920,618     $ 991,873     $ 940,507     $ 1,152,326     $ 1,142,073  
(% of net sales)
    20.6       12.4       13.5       12.6       11.7  
Marketing, selling, general and administrative
  $ 625,865     $ 751,621     $ 697,402     $ 906,742     $ 952,443  
(% of net sales)
    14.0       9.4       10.0       9.9       9.8  
Income/(loss) before income taxes
  $ (211,556 )   $ 1,829,250     $ 1,581,569     $ 2,166,971     $ 2,439,653  
Effective tax rate(%)
    29.5       26.1       23.5       30.0       29.9  
Net income/(loss)
  $ (149,147 )   $ 1,351,303     $ 1,209,900     $ 1,516,663     $ 1,710,196  
(% of net sales)
    (3.3 )     16.9       17.3       16.5       17.6  
Earnings/(loss) per share
  $ (0.09 )   $ 0.78     $ 0.73     $ 0.97     $ 1.20  
Weighted average common shares
    1,659,557       1,721,645       1,657,493       1,565,072       1,427,002  
Order backlog
  $ 2,495,115     $ 3,368,382     $ 2,570,808     $ 3,398,280     $ 3,654,704  
Working capital(2)
  $ 4,789,480     $ 6,020,747     $ 5,069,663     $ 3,644,974     $ 4,232,201  
Current ratio(2)
    3.9       3.6       3.9       2.5       2.8  
Long-term debt
  $ 456,422     $ 410,436     $ 407,380     $ 204,708     $ 202,281  
Cash dividends declared per common share
  $     $     $ 0.09     $ 0.18     $ 0.23  
Stockholders’ equity
  $ 8,068,034     $ 9,262,027     $ 8,928,549     $ 6,651,400     $ 7,821,409  
Book value per share
  $ 4.81     $ 5.51     $ 5.56     $ 4.78     $ 5.64  
Total assets
  $ 10,311,622     $ 12,093,445     $ 11,269,157     $ 9,480,837     $ 10,654,075  
Capital expenditures, net of loss on fixed asset retirements
  $ 211,959     $ 171,538     $ 177,097     $ 151,117     $ 243,383  
Regular employees
    12,050       12,191       12,576       14,072       14,550  
 
 
(1) Each fiscal year ended on the last Sunday in October.
 
(2) In fiscal 2006, Applied reclassified certain fixed-income securities from short-term investments to long-term investments; prior period balances have been reclassified to conform to the current period presentation.


21


Table of Contents

 
Item 7:   Management’s Discussion and Analysis of Financial Condition and Results of Operations
 
Introduction
 
Management’s Discussion and Analysis (MD&A) is intended to facilitate an understanding of Applied’s business and results of operations. This MD&A should be read in conjunction with Applied’s Consolidated Financial Statements and the accompanying Notes to Consolidated Financial Statements included elsewhere in this report. The following discussion contains forward-looking statements and should also be read in conjunction with the cautionary statement set forth at the beginning of this Annual Report on Form 10-K. MD&A consists of the following sections:
 
  •  Overview:  a summary of Applied’s business, measurements and opportunities.
 
  •  Results of Operations:  a discussion of operating results.
 
  •  Segment Information:  a discussion of segment operating results.
 
  •  Financial Condition, Liquidity and Capital Resources:  an analysis of cash flows, sources and uses of cash, contractual obligations and financial position.
 
  •  Critical Accounting Policies:  a discussion of critical accounting policies that require the exercise of judgments and estimates.
 
Overview
 
Applied provides Nanomanufacturing Technology solutions for the global semiconductor, flat panel display, solar and related industries, with a broad portfolio of innovative equipment, service and software products. Applied’s customers include manufacturers of semiconductor chips and wafers, liquid crystal displays (LCDs), solar photovoltaic (PV) cells, flexible electronics and energy-efficient glass. Applied reports four segments: Silicon, Fab Solutions, Display, and Adjacent Technologies. Product development and manufacturing activities occur in North America, Europe, Israel and Asia. Applied’s broad range of equipment and service products are highly technical and are sold through a direct sales force.
 
As a supplier to these industries, Applied’s results are driven primarily by worldwide demand for integrated circuits, which in turn depends on end-user demand for electronic products. Applied’s business is subject to cyclical industry conditions, as demand for manufacturing equipment and services can change depending on supply and demand for chips, LCDs and other electronic devices, as well as other factors, such as global economic conditions and technological advances in fabrication processes.
 
The following table presents certain significant measurements for the past three fiscal years:
 
                         
Fiscal Year
  2005     2006     2007  
    (In millions, except per share amounts and percentages)  
 
New orders
  $ 6,389     $ 9,888     $ 9,677  
Net sales
  $ 6,992     $ 9,167     $ 9,735  
Gross margin
  $ 3,086     $ 4,292     $ 4,492  
Gross margin percent
    44.1 %     46.8 %     46.1 %
Net income
  $ 1,210     $ 1,517     $ 1,710  
Earnings per share
  $ 0.73     $ 0.97     $ 1.20  
 
Fiscal 2007 financial results reflected improved conditions in the semiconductor industry that began with the industry’s recovery in 2006, while conditions in the display industry were mixed as manufacturers postponed capacity additions despite strong consumer demand for LCD TVs. Total orders decreased slightly from fiscal 2006, primarily due to the significant decline in demand for display manufacturing products, partially offset by increased demand for products and services in all other segments. Net sales increased during fiscal 2007 over fiscal 2006, primarily due to strong demand from DRAM and Flash memory chip manufacturers, partially offset by a significant decline in LCD equipment sales as manufacturers absorbed capacity following substantial growth in 2006. Net income improved in fiscal 2007 compared to fiscal 2006 due to higher sales and lower operating expenses, offset in


22


Table of Contents

part by lower interest income. Fiscal 2007 financial results included equity-based compensation expenses, restructuring and asset impairment and other charges associated with ceasing development of beamline implant products, and an in-process research and development (IPR&D) expense associated with the acquisition of certain net assets of Brooks Automation, Inc. (Brooks Software).
 
In fiscal 2006, customer demand improved over fiscal 2005, resulting in higher orders and revenue. Fiscal 2006 results reflected a recovery in the semiconductor and flat panel display industries and the global economy, as end-user demand for electronic products and LCDs drove increased customer investments in advanced silicon (particularly memory) and display products. During this period, Applied’s semiconductor customers increased both high-volume production and leading-edge 65nm and 45nm chip development. Improvements in operating performance were offset in part by restructuring and asset impairment charges associated with real estate and facilities disinvestment, equity-based compensation expenses, and an IPR&D expense associated with the acquisition of Applied Films Corporation (Applied Films).
 
Fiscal 2005 financial results reflected a challenging environment as Applied’s customers decreased fab utilization globally and reduced or delayed capital expenditures as a result of excess inventories and slowing demand for chips. In this period, Applied focused on lowering costs, improving efficiencies, reducing cycle time and bringing new products to market.
 
Applied expects a challenging environment for the first part of fiscal 2008. Uncertain economic conditions, including higher energy prices, credit concerns and changes in consumer confidence, have led to reduced demand in the semiconductor equipment industry. As a result, semiconductor equipment customers are expected to invest at levels lower than in 2007, offset in part by the anticipated onset of a recovery in the flat panel display industry and growth in other markets.
 
Results of Operations
 
Quarterly and full fiscal year financial information is as follows:
 
                                         
    Fiscal Quarter     Fiscal
 
    First     Second     Third     Fourth     Year  
    (In millions, except per share amounts)  
 
2005:
                                       
New orders
  $ 1,675     $ 1,553     $ 1,468     $ 1,693     $ 6,389  
Net sales
  $ 1,781     $ 1,861     $ 1,632     $ 1,718     $ 6,992  
Gross margin
  $ 790     $ 818     $ 717     $ 761     $ 3,086  
Net income
  $ 289     $ 305     $ 370     $ 246     $ 1,210  
Earnings per share
  $ 0.17     $ 0.18     $ 0.23     $ 0.15     $ 0.73  
2006:
                                       
New orders
  $ 2,041     $ 2,488     $ 2,670     $ 2,688     $ 9,888  
Net sales
  $ 1,858     $ 2,248     $ 2,543     $ 2,518     $ 9,167  
Gross margin
  $ 838     $ 1,045     $ 1,223     $ 1,186     $ 4,292  
Net income
  $ 143     $ 413     $ 512     $ 449     $ 1,517  
Earnings per share
  $ 0.09     $ 0.26     $ 0.33     $ 0.30     $ 0.97  
2007:
                                       
New orders
  $ 2,538     $ 2,648     $ 2,284     $ 2,206     $ 9,677  
Net sales
  $ 2,277     $ 2,530     $ 2,561     $ 2,367     $ 9,735  
Gross margin
  $ 1,063     $ 1,137     $ 1,216     $ 1,077     $ 4,492  
Net income
  $ 403     $ 411     $ 474     $ 422     $ 1,710  
Earnings per share
  $ 0.29     $ 0.29     $ 0.34     $ 0.30     $ 1.20  
 
Applied’s business was subject to cyclical industry conditions in fiscal 2005, 2006 and 2007. As a result of these conditions, there were significant fluctuations in Applied’s quarterly new orders and net sales, both within and


23


Table of Contents

across the fiscal years. Demand for manufacturing equipment has historically been volatile as a result of sudden changes in chip and LCD supply and demand and other factors, including rapid technological advances in fabrication processes.
 
New Orders
 
New orders by geographic region, which were attributed to the location of customers’ facilities, were as follows:
 
                         
Fiscal Year
  2005     2006     2007  
    (In millions)  
 
Taiwan
  $ 1,549     $ 2,098     $ 2,703  
Korea
    856       1,758       1,639  
Japan
    1,295       1,823       1,520  
North America(1)
    1,279       1,901       1,518  
Asia-Pacific(2)
    566       1,272       1,262  
Europe
    844       1,036       1,035  
                         
    $ 6,389     $ 9,888     $ 9,677  
                         
 
 
(1) Primarily the United States.
 
(2) Includes China.
 
New orders for fiscal 2007 decreased 2 percent to $9.7 billion from $9.9 billion in the prior year, reflecting delays in investment by LCD customers, partially offset by increased demand for solar equipment, semiconductor manufacturing equipment, and service products. Demand for semiconductor equipment slowed in the second half of fiscal 2007 as customers absorbed added capacity. LCD customers increased spending levels in the fourth quarter of fiscal 2007.
 
New orders for fiscal 2006 increased 55 percent to $9.9 billion from $6.4 billion in the prior year, as customer demand increased. Fiscal 2006 orders reflected increased semiconductor manufacturing equipment orders from memory manufacturers, increased service orders as a result of higher customer factory utilization and new product introductions, and increased display orders as customers invested in next generation equipment. New orders for fiscal 2005 decreased to $6.4 billion reflecting a challenging environment, as semiconductor manufacturers reduced their capital investments to align inventories with demand.
 
Applied’s backlog for the last three fiscal years was as follows: $3.7 billion at October 28, 2007, $3.4 billion at October 29, 2006, and $2.6 billion at October 30, 2005. Backlog consists only of orders for which written authorizations have been accepted, shipment dates within 12 months have been assigned and revenue has not been recognized. Due to the potential for customer changes in delivery schedules or cancellation of orders, Applied’s backlog at any particular time is not necessarily indicative of actual sales for any future periods.


24


Table of Contents

Net Sales
 
Net sales by geographic region, which were attributed to the location of customers’ facilities, were as follows:
 
                         
Fiscal Year
  2005     2006     2007  
    (In millions)  
 
Taiwan
  $ 1,608     $ 2,079     $ 2,679  
Korea
    1,021       1,699       1,847  
North America(1)
    1,472       1,708       1,554  
Japan
    1,396       1,518       1,493  
Asia-Pacific(2)
    612       1,157       1,206  
Europe
    883       1,006       956  
                         
    $ 6,992     $ 9,167     $ 9,735  
                         
 
 
(1) Primarily the United States.
 
(2) Includes China.
 
During fiscal 2007, net sales increased by 6 percent, from $9.2 billion in fiscal 2006 to $9.7 billion in fiscal 2007, led by strength in memory capacity expansion throughout the year. In fiscal 2006, following the trend of increasing orders that year, net sales increased by 31 percent, from $7.0 billion in fiscal 2005 to $9.2 billion in fiscal 2006. In fiscal 2005, net sales of $7.0 billion reflected lower demand for semiconductor products.
 
Gross Margin
 
Gross margin as a percentage of net sales decreased to 46.1 percent in fiscal 2007 from 46.8 percent in fiscal 2006, which was an increase from 44.1 percent in fiscal 2005. The decrease in the gross margin percentage from fiscal 2006 to fiscal 2007 was principally attributable to inventory-related charges of $56 million associated with ceasing development of beamline implant products, incremental charges attributable to acquisitions consisting of inventory fair value adjustments on products sold, amortization, and product mix, partially offset by higher revenue levels and lower material costs. Gross margin during fiscal 2006 and 2007 included $37 million and $27 million, respectively, of equity-based compensation expense. The increase in the gross margin percentage from fiscal 2005 to fiscal 2006 was principally attributable to the combination of higher revenue levels, decreased product costs and increased manufacturing volume and absorption, partially offset by increased variable and equity-based compensation costs. Applied began recognizing expenses associated with stock options and the ESPP in fiscal 2006.
 
Research, Development and Engineering
 
Applied’s future operating results depend to a considerable extent on its ability to maintain a competitive advantage in the products and services it provides. Applied believes that it is critical to continue to make substantial investments in RD&E to assure the availability of innovative technology that meets the current and projected requirements of its customers’ most advanced designs. Applied has historically maintained its commitment to investing in RD&E in order to continue to offer new products and technologies. RD&E expenses were $1.1 billion (12 percent of net sales) in fiscal 2007, $1.2 billion (13 percent of net sales) in fiscal 2006, and $941 million (13 percent of net sales) in fiscal 2005. RD&E expense during fiscal 2006 and 2007 included $76 million and $56 million, respectively, of equity-based compensation expense. Development cycles range from 12 to 36 months depending on whether the product is an enhancement of an existing product, which typically has a shorter development cycle, or a new product, which typically has a longer development cycle. Most of Applied’s existing products resulted from internal development activities and innovations involving new technologies, materials and processes. In certain instances, Applied acquires technologies, either in existing or new product areas, to complement its existing technology capabilities and to reduce time to market.
 
In fiscal 2007, Applied focused on developing systems for customers’ new chip designs with 45nm and below geometries, including systems to enable faster transistors using strain engineering and high-k metal gates, and


25


Table of Contents

patterning processes that will enable customers to extend their existing 193 nm lithography tools through additional technology generations. Applied also continued to invest in solar research and development.
 
In fiscal 2006, Applied continued its development of systems to increase chip performance, especially for Flash and DRAM devices. Applied also focused on developing systems for 32nm and 22nm copper/low k interconnect processing technologies to address critical manufacturing challenges that chipmakers face as they transition to future device generations, helping them to bring new products to market more rapidly while minimizing risk. Applied also continued to focus on developing LCD systems to process larger glass substrates.
 
In fiscal 2005, Applied focused on developing systems for customers’ advanced chip designs, including systems to enable smaller and faster interconnect and transistor structures with 65nm, 45nm and below geometries, and LCD systems to process larger glass substrates.
 
During fiscal 2007, Applied recorded an IPR&D expense of $5 million associated with the acquisition of certain net assets of Brooks Software. During fiscal 2006, Applied recorded an IPR&D expense in the amount of $14 million related to the acquisition of Applied Films. Applied’s methodology for allocating the purchase price relating to purchased acquisitions to IPR&D was determined through established valuation techniques. The IPR&D was expensed upon acquisition because technological feasibility had not been established and no future alternative uses existed. No IPR&D charges were recorded in fiscal 2005.
 
Marketing, Selling, General and Administrative
 
Marketing, selling, general and administrative expenses were $952 million (10 percent of net sales) in fiscal 2007, $907 million (10 percent of net sales) in fiscal 2006, and $697 million (10 percent of net sales) in fiscal 2005. The increase in marketing, selling, general and administrative expenses from fiscal 2006 to 2007 was principally attributable to increased operating costs from acquired businesses, investments in the solar business expansion, and increased variable compensation expenses. These expenses were partially offset by lower equity compensation expenses and savings from cost control initiatives, including ceasing development of beamline implant products and transitioning to managed service providers to perform certain information technology and business infrastructure support. Marketing, sales and general and administrative expenses during fiscal 2006 and 2007 included $104 million and $77 million, respectively, of equity-based compensation expense. The increase from fiscal 2005 to 2006 correlated to the increase in business volume, as well as increases in variable compensation as a result of improved operating performance, equity-based compensation expense, and early spending on Applied’s implementation of an enterprise resource planning software system, partially offset by savings resulting from Applied’s continued focus on controlling its overall cost structure.
 
Restructuring and Asset Impairments
 
During the first quarter of fiscal 2006, Applied’s Board of Directors approved a plan to disinvest a portion of Applied’s real estate and facilities portfolio (the Disinvestment Plan). Properties with an estimated fair value of $56 million were reported as assets held-for-sale and reclassified from property, plant and equipment on the Consolidated Balance Sheet. During fiscal 2006, Applied recorded an asset impairment charge of $124 million to write down the following properties to estimated fair value: (1) facilities in Narita, Japan, Chunan, Korea, Hillsboro, Oregon, and Danvers, Massachusetts; and (2) 26 acres of unimproved land in Hillsboro, Oregon. During fiscal 2006, Applied sold the Danvers facility for net proceeds of $16 million and recognized a gain of $4 million. During fiscal 2007, Applied sold the Hillsboro, Chunan, and Narita facilities and the Hillsboro land for total net proceeds of $38 million and recognized a gain of $3 million. Also in fiscal 2006, as part of the Disinvestment Plan, Applied recorded lease termination charges in the amount of $89 million related to the closure of its leased Hayward, California facility.
 
During the second quarter of fiscal 2007, Applied’s Board of Directors approved a plan (the Plan) to cease development of beamline implant products for semiconductor manufacturing and curtail the operations of its Implant group based in Horsham, England. Pursuant to the Plan, Applied closed its research, development and manufacturing operations in Horsham in October 2007. The total cost of implementing the Plan is expected to be in the range of $95 million to $110 million, and is reported in the Consolidated Statements of Operations under cost of


26


Table of Contents

products sold and operating expenses (including restructuring and asset impairment charges). The majority of the cash outlays in connection with the Plan occurred in fiscal 2007.
 
Costs under the Plan in fiscal 2007 consisted primarily of inventory-related charges reported as cost of products sold of $56 million, other operating expenses of $10 million, and restructuring and asset impairment charges of $30 million. Also as part of the Plan, Applied recorded restructuring charges of $22 million, consisting primarily of employee termination costs to reduce its workforce by approximately 215 positions. The majority of the affected employees were based in Horsham, England, and represented multiple functions. Asset impairment charges included $8 million of fixed asset write-offs. The Implant group operated in the Silicon segment, and the results of its operations were not material to Applied’s financial position or results of operations.
 
For further details, see Note 6 of Notes to Consolidated Financial Statements.
 
Net Interest Income
 
Net interest income was $98 million for fiscal 2007, $149 million for fiscal 2006, and $134 million for fiscal 2005.
 
The decrease in net interest income from fiscal 2006 to 2007 was primarily due to a reduction in cash and investments during the fourth quarter of fiscal 2006, when Applied repurchased 145 million shares of outstanding common stock for an aggregate purchase price of $2.5 billion under an accelerated stock buyback program. On January 24, 2007, Applied settled the price adjustment of $132 million relating to the accelerated stock buyback program by payment in cash to Goldman Sachs & Co. (Goldman Sachs), resulting in an adjusted price per share of $18.08. The repurchase was funded with Applied’s existing cash and investments. A portion of the investment portfolio was sold to fund the accelerated stock buyback, resulting in lower interest income in 2007.
 
The increase in net interest income from fiscal 2005 to 2006 was due primarily to increased interest rates combined with a decrease in interest expense associated with scheduled debt maturities in September 2004 and September 2005.
 
Income Taxes
 
Applied’s effective income tax provision rate was 29.9 percent for fiscal 2007, 30.0 percent for fiscal 2006, and 23.5 percent for fiscal 2005. Applied’s effective tax rate of 29.9 percent for fiscal 2007 reflected benefits of $36 million principally related to the favorable resolution of audits of prior years’ income tax filings, partially offset by a $13 million charge from the expensing of equity-based compensation. Applied’s effective tax rate of 30.0 percent for fiscal 2006 reflected benefits of $61 million principally related to the favorable resolution of audits of prior years’ income tax filings, partially offset by a $17 million charge from the expensing of equity-based compensation. Applied’s effective rate of 23.5 percent for fiscal 2005 reflected the favorable resolution of audits of prior years’ income tax filings of $118 million and a change in estimate with respect to export tax benefits of $14 million, partially offset by a charge of $32 million relating to the distribution of foreign earnings under the American Jobs Creation Act of 2004 (the Jobs Creation Act).
 
Applied’s future effective income tax rate depends on various factors, such as tax legislation, the geographic composition of Applied’s pre-tax income, and non-tax deductible expenses incurred in connection with acquisitions. Management carefully monitors these factors and timely adjusts the effective income tax rate accordingly.
 
Segment Information
 
After the acquisition of Applied Films, Applied made certain changes to its internal financial reporting structure during the fourth quarter of fiscal 2006 and, as a result, operates in four reportable segments: Silicon, Fab Solutions, Display, and Adjacent Technologies. A description of the products and services, as well as financial data, for each reportable segment can be found in Note 10 of Notes to Consolidated Financial Statements. Future changes to Applied’s internal financial reporting structure may result in changes to the reportable segments disclosed. Applied does not allocate to its reportable segments certain operating expenses, which it manages separately at the corporate level. These unallocated costs include equity-based compensation and certain components of variable compensation, corporate marketing and sales, corporate functions (certain management, finance, legal, human resources and RD&E), and unabsorbed information technology and occupancy costs. Prior to the fourth quarter of


27


Table of Contents

fiscal 2006, Applied operated in one reportable segment. Discussions below include the results of each reportable segment.
 
Silicon Segment
 
The Silicon segment includes semiconductor capital equipment for etch, rapid thermal processing (RTP), deposition, chemical mechanical planarization (CMP), and metrology and inspection. Development efforts are focused on solving customers’ key technical challenges, including transistor performance and nanoscale patterning, and on reducing chip manufacturing costs. A significant portion of fiscal 2007 demand was attributable to a growing market for consumer products with greater memory content.
 
                         
Fiscal Year
  2005     2006     2007  
    (In millions)  
 
New orders
  $ 3,918     $ 6,555     $ 6,651  
Net sales
  $ 4,468     $ 5,971     $ 6,512  
Operating income
  $ 1,105     $ 2,000     $ 2,379  
 
Silicon orders of $6.7 billion increased 1 percent in fiscal 2007, compared to $6.6 billion in fiscal 2006, reflecting the semiconductor industry’s strength during this period, driven by demand for cell phones, digital TVs, game consoles, MP3 players and other electronic products. The majority of new orders were for memory applications as customers invested in leading-edge Flash and DRAM memory devices, while orders from foundries remained at low levels. Net sales increased 9 percent to $6.5 billion in fiscal 2007, compared to $6.0 billion in fiscal 2006. The increase in net sales was due to increased investment by memory and logic semiconductor customers in multiple areas, including etch, inspection, and RTP products. Operating income increased 19 percent to $2.4 billion in fiscal 2007, compared to $2.0 billion in fiscal 2006. The increase in operating income was due to higher revenue levels and continued focus on cost controls. Operating income for fiscal 2007 included charges of $66 million related to ceasing development of beamline implant products. In fiscal 2006, the Company launched the Applied Producer GT, a significant redesign of its successful Producer platform that offers faster, more cost-effective CVD processing for 45 nm and beyond applications. To meet the challenges of fabricating next-generation transistors, Applied announced its portfolio of high-k/metal gate solutions, including the Applied Advanced Gate Stack and Applied Centura Carina Etch systems. Other new etch systems introduced were the Applied Mariana Trench, for etching high aspect ratio structures, the Applied Opus AdvantEdge Metal Etch with a new 5-chamber platform, and the Applied Centura Tetra III Advanced Reticle Etch. The Company also added to its line of lithography-enabling systems with the new Applied Producer ACE SACVD and added to its line of strain engineering solutions with the Applied Producer Celera CVD.
 
In fiscal 2006, Silicon orders of $6.6 billion increased 67 percent compared to fiscal 2005. During fiscal 2006, leading semiconductor manufacturers reported increased sales as the electronics market continued to grow. The demand for consumer electronics, including broadband, personal computers and cell phones with increasing digital content and complex chips, resulted in increased chip demand and the need for additional capacity. In addition to expanding consumer electronics demand, corporate information technology investment increased, with an emphasis on security, server consolidation and more robust internet infrastructures. Net sales of $6.0 billion increased 34 percent in fiscal 2006 compared to fiscal 2005. During fiscal 2006, demand increased in many areas, including etch, inspection and thin films products. Operating income of $2.0 billion increased 81 percent in fiscal 2006 compared to fiscal 2005. Improved operating results in fiscal 2006 reflected an increase in business volume, offset in part by increases in variable compensation expenses. In fiscal 2006, Applied continued its development of systems to increase chip performance, especially for Flash and DRAM devices. To extend the usefulness of aluminum (the material used by many memory manufacturers for interconnects) to the sub-70nm node, the Company introduced two products, the Applied Endura CVD Al technology and Applied Centura AdvantEdge Metal Etch system. For faster copper interconnects, Applied launched its enhanced Endura CuBS/S II system with Aktiv Preclean, extending the system’s capability to the 45nm node and below, especially for use with ultra-low dielectric constant (low k) films. The Company introduced the Applied Endura iLB II (integrated liner-barrier) system, offering advances in PVD titanium and preclean technologies, to provide significantly reduced resistance for contact structures. The Company also focused on providing solutions to extend customers’ lithography technology, introducing the Applied Producer APF-e (advanced patterning film enhancement) system. The new


28


Table of Contents

APF-e film enables chipmakers to cost-effectively pattern nano-scale features without additional integration complexity while reducing their reliance on next-generation lithography systems.
 
In fiscal 2005, Silicon orders of $3.9 billion and net sales of $4.5 billion reflected lower semiconductor capital equipment investment. During the year, customers decreased manufacturing utilization to address rising chip inventory and softening end-user demand. Operating income of $1.1 billion reflected Applied’s reduction in variable expenses and cost of products sold in order to align its cost structure with market conditions. In fiscal 2005, RD&E focused on developing systems for customers’ advanced chip designs, including systems to enable smaller and faster interconnect and transistor structures with 65nm, 45nm and below geometries. For copper interconnect applications, the Company introduced the Applied Endura CuB/S II system with advanced copper barrier/seed technology and the Applied Producer Black Diamond II system for next-generation low k dielectric film layers. For leading-edge transistor gate applications, the Company launched the Applied Centura AdvantEdge Etch system, Applied Siconitm preclean technology and the Applied Vantage RadOx RTP. New applications in strain engineering, which involves creating localized areas of stress in the transistor structure, were also developed for existing systems to meet customers’ requirements for faster transistors. In the area of inspection and metrology, the Company launched the Applied UVisiontm system, the industry’s first laser 3D brightfield inspection tool, and Applied OPC Check software, designed to automate critical OPC mask verification.
 
Fab Solutions Segment
 
The Fab Solutions segment includes products to improve the productivity and operating efficiency and lessen the environmental impact of customers’ factories, and includes spares and remanufactured equipment sales. Customer demand for spare parts and services is fulfilled through a global distribution system with trained service engineers located in close proximity to customer sites. This business is focused on expanding with technically-differentiated new products that improve fab productivity, reduce fab operation costs, and enable customers to decrease the environmental impact of manufacturing.
 
                         
Fiscal Year
  2005     2006     2007  
    (In millions)  
 
New orders
  $ 1,713     $ 2,259     $ 2,374  
Net sales
  $ 1,768     $ 2,210     $ 2,196  
Operating income
  $ 400     $ 623     $ 572  
 
Orders of $2.4 billion increased 5 percent in fiscal 2007, compared to $2.3 billion in fiscal 2006. The increase in orders reflected increased demand for spare parts and services, as well as demand for factory automation products obtained as part of the Brooks Software acquisition. Net sales of $2.2 billion in fiscal 2007 were slightly down compared to fiscal 2006 and reflected declines in spares parts sales, offset by increased factory automation sales. Fiscal 2007 remanufactured equipment orders and net sales remained consistent with fiscal 2006 levels. Operating income decreased 8 percent to $572 million in fiscal 2007, compared to $623 million in fiscal 2006, reflecting product mix and increased operating expenses and charges related to the Brooks Software acquisition.
 
In fiscal 2006, orders of $2.3 billion increased 32 percent compared to fiscal 2005. Net sales of $2.2 billion increased 25 percent compared to fiscal 2005. Net sales reflected increases in spare parts shipments and service contracts as a result of higher wafer starts and an increase in 200mm remanufactured equipment investment. Operating income of $623 million increased 56 percent in 2006 compared to 2005. During fiscal 2006, operating results reflected improved operational efficiencies and savings from cost control initiatives. Applied also expanded its product offerings with the introduction of abatement systems for reducing perfluorocompound (PFC) emissions and additional chamber performance services capabilities.
 
Fiscal 2005 orders of $1.7 billion reflected customers’ cost reduction initiatives and lower remanufactured systems orders, offset in part by a modest increase in wafer starts. Fiscal 2005 net sales were $1.8 billion and operating income was $400 million. Applied expanded its product portfolio with the addition of abatement systems, FAB300 manufacturing execution systems, products for assembly and test, kitting and cleaning, and other technology-focused fab offerings.


29


Table of Contents

Display Segment
 
The Display segment encompasses products and services for manufacturing LCDs for TVs, personal computers and other video-enabled devices. Applied is focused on expanding market share by differentiation with larger-scale substrates, entry into new markets, and development of products to enable cost reductions through enhanced productivity and uniformity. The Display segment also developments, manufactures and supports differentiated stand-alone equipment for the Applied SunFab Thin Film Line.
 
                         
Fiscal Year
  2005     2006     2007  
    (In millions)  
 
New orders
  $ 758     $ 1,037     $ 407  
Net sales
  $ 756     $ 966     $ 862  
Operating income
  $ 254     $ 319     $ 217  
 
Orders decreased 61 percent to $407 million in fiscal 2007, compared to $1.0 billion in fiscal 2006, reflecting continued delays in capacity expansion plans by LCD panel makers in light of excess inventories and sales price declines. LCD customers increased spending levels in the fourth quarter of fiscal 2007 as panel makers began to experience more favorable market conditions. Net sales decreased 11 percent to $862 million in fiscal 2007 from $1.0 billion in fiscal 2006. The decrease in net sales was attributable to lower investment by LCD manufacturers as they absorbed capacity. Operating income decreased 32 percent to $217 million in fiscal 2007, compared to $319 million in fiscal 2006, due to lower revenues and factory absorption, product mix and higher operating expenses in support of the expanded product portfolio resulting from the acquisition of Applied Films in July 2006. In 2007, Applied launched the AKT-PiVottm 55KV system which employs high-productivity, cost-efficient PVD technology to deposit metal and transparent conductive oxide films on the substrate.
 
In fiscal 2006, orders of $1.0 billion increased 37 percent compared to fiscal 2005. During fiscal 2006, price reductions in consumer electronics accelerated the growth of the flat panel display market. As a result, display manufacturers increased investments in Gen-7, Gen-7.5, and Gen-8 systems. In addition, laptop demand continued to be strong, resulting in additional Gen-5 and Gen-5.5 fab investment. With the acquisition of Applied Films in fiscal 2006, Applied entered the PVD color filter market. Net sales of $1.0 billion increased 28 percent in 2006 compared to 2005. During the last quarter of fiscal 2006, flat panel equipment demand began to slow as customers aligned their capacity plans and inventory levels. Operating income of $319 million increased 25 percent in 2006 compared to 2005. Fiscal 2006 results included a $5 million IPR&D expense related to the acquisition of Applied Films. Applied launched three FPD systems, the AKT-55K EBT, the AKT-55K PECVD and the AKT-NEW ARISTO 2200, for manufacturing Gen-8.5 panels, sized at 2.2m x 2.5m, which produce up to six 55-inch LCD TV screens.
 
Fiscal 2005 orders of $758 million reflected lower demand for smaller panel equipment, offset in part by orders for Gen-7.5 systems as manufacturers migrated to larger-sized flat panel display production. Net sales and operating income increased to $756 million and $254 million, respectively. Fiscal 2005 results included higher RD&E expenses. Applied introduced the Gen-8 AKT-50K PECVD system for manufacturing LCDs. This system processes 2.2m x 2.4m glass substrates for producing up to six 52-inch LCD TV screens.
 
Adjacent Technologies
 
The Adjacent Technologies segment includes products and services for manufacturing solar cells, high throughput roll-to-roll coating systems for flexible electronics, and energy-efficient glass. Applied began offering these products after the acquisition of Applied Films in the third quarter of fiscal 2006. In the fourth quarter of fiscal 2007, Applied acquired HCT Shaping Systems SA (HCT), expanding its solar product offerings. Activities in this segment are focused on delivering solutions to generate and conserve energy, with the objective to lower the cost to produce solar electricity by providing equipment and services to enhance manufacturing scale and efficiency.
 


30


Table of Contents

                         
Fiscal Year
  2005     2006     2007  
    (In millions)  
 
New orders
  $     $ 37     $ 245  
Net sales
  $     $ 20     $ 165  
Operating loss
  $     $ 8     $ 89  
 
New orders of $245 million in fiscal 2007 increased from $37 million in fiscal 2006, due primarily to increased orders of c-Si solar, glass and flexible electronics products. Net sales of $165 million in fiscal 2007 increased from $20 million in fiscal 2006 due primarily to higher glass, flexible electronics and solar net sales. Operating loss of $89 million in fiscal 2007 increased from $8 million in fiscal 2006 reflecting increased RD&E spending to develop products and services that enable lower-cost production of solar energy and costs related to expansion of solar marketing efforts, offset by higher revenues. In fiscal 2007, Applied introduced the Applied SunFab Thin Film Line, the first integrated production line designed for manufacturing thin film silicon solar modules using 5.7 square meter glass panels.
 
Orders and net sales in fiscal 2006 reflected the results of Applied Films’ solar, flexible electronics and energy-efficient glass products that Applied acquired in the third quarter. Fiscal 2006 results included a $9 million IPR&D expense related to the acquisition of Applied Films.
 
Business Combinations and Equity-Method Investment
 
On August 23, 2007, Applied acquired all of the outstanding shares of Switzerland-based HCT for $463 million in cash, net of cash acquired. HCT is the world’s leading supplier of precision wafering systems used principally in manufacturing c-Si substrates for the solar industry.
 
On March 30, 2007, Applied purchased Brooks Software for $137 million in cash. Brooks Software is a leading provider of factory management and control software to the semiconductor and flat panel display industries. Its products complement Applied’s existing software applications and enable Applied to offer customers a comprehensive computer integrated manufacturing solution for optimizing fab operations.
 
On August 14, 2006, Applied’s wholly-owned subsidiary, Metron Technology, Inc. (Metron), purchased certain parts cleaning and recycling assets in Singapore from UMS Solutions PTE Ltd. for $10 million. The acquisition enhanced the Company’s capabilities in Southeast Asia to provide advanced, high-quality parts cleaning services to support its customers’ semiconductor manufacturing requirements.
 
On July 20, 2006, Applied and Dainippon Screen Mfg. Co., Ltd. (Screen) completed the formation of Sokudo Co., Ltd. (Sokudo), a Japanese joint venture company, to deliver advanced track solutions for customers’ critical semiconductor manufacturing requirements. Track systems are a key part of semiconductor manufacturing and are used before and after photolithography to deposit, bake and develop the photoresist layer that defines circuit patterns. Screen owns 52 percent and holds the controlling interest in Sokudo, and Applied owns 48 percent of Sokudo. Screen transferred into Sokudo its existing track business and related intellectual property, including employees, products and its installed base of systems. Applied paid $147 million for its investment in Sokudo. Additionally, Applied contributed to Sokudo certain technology and related intellectual property and has provided key development employees. Screen performs manufacturing for Sokudo under an outsourcing agreement.
 
On July 7, 2006, Applied completed its acquisition of Applied Films, a leading supplier of thin film deposition equipment used in manufacturing LCDs, solar cells, flexible electronics and energy-efficient glass. Applied paid $28.50 per share in cash for each outstanding share of Applied Films for a total purchase price of approximately $484 million, or $328 million net of Applied Films’ existing cash and marketable securities. As part of the acquisition, Applied assumed Applied Films’ outstanding stock options and restricted stock unit awards that, at the acquisition date, had a total fair value of $26 million, of which $18 million was allocated to the purchase price and the remainder to unearned compensation. Upon the acquisition and subject to vesting, Applied Films stock options became exercisable for shares of Applied common stock and Applied Films restricted stock unit awards became payable in shares of Applied common stock totaling, in the aggregate, three million shares of Applied common stock.

31


Table of Contents

On December 23, 2005, Applied acquired all of the outstanding shares of ChemTrace Corporation and ChemTrace Precision Cleaning, Inc. for $22 million in cash, net of cash acquired, of which $18 million was paid upon closing. This business provides customers with precision parts cleaning and materials testing solutions.
 
On June 28, 2005, Applied purchased certain assets of SCP Global Technology, Inc. (SCP), consisting of single-wafer, HF-last immersion technology and Marangoni clean/dry intellectual property, for approximately $24 million in cash.
 
On December 16, 2004, Applied acquired the assets of ATMI, Inc.’s Treatment Systems business (EcoSys), which supported the gas abatement requirements of process equipment for integrated circuit manufacturing and other industrial applications, for approximately $16 million in cash.
 
On December 14, 2004, Applied acquired substantially all of the operating subsidiaries and businesses of Metron Technology N.V., a provider of a range of products and services for fab-wide operations, for approximately $85 million in cash.
 
For further details, see Note 12 of Notes to Consolidated Financial Statements.
 
Recent Accounting Pronouncements
 
In February 2007, the Financial Accounting Standards Board (FASB) issued SFAS No. 159, “The Fair Value Option for Financial Assets and Financial Liabilities Including an Amendment of FASB Statement No. 115” (SFAS No. 159), which permits entities to elect to measure many financial instruments and certain other items at fair value that are not currently required to be measured at fair value. This election is irrevocable. SFAS No. 159 will be effective for Applied in fiscal 2009. Applied is evaluating the potential impact of the implementation of SFAS No. 159 on its financial position and results of operations.
 
In September 2006, the FASB issued Statement No. 157, “Fair Value” (SFAS 157). SFAS 157 defines fair value, establishes a framework for measuring fair value in accordance with generally accepted accounting principles, and expands disclosures about fair value measurements. SFAS 157 becomes effective for Applied in fiscal 2009. Applied is evaluating the potential impact of the implementation of SFAS 157 on its financial position and results of operations.
 
In July 2006, the FASB issued FASB Interpretation 48, “Accounting for Income Tax Uncertainties” (FIN 48). FIN 48 defines the threshold for recognizing the benefits of tax return positions in the financial statements as “more-likely-than-not” to be sustained by the taxing authority. The recently issued literature also provides guidance on the derecognition, measurement and classification of income tax uncertainties, along with any related interest and penalties. FIN 48 also includes guidance concerning accounting for income tax uncertainties in interim periods and increases the level of disclosures associated with any recorded income tax uncertainties. FIN 48 will become effective for Applied beginning in fiscal 2008. Any differences between the amounts recognized in the statements of financial position prior to the adoption of FIN 48 and the amounts reported after adoption will be accounted for as a cumulative-effect adjustment recorded to the beginning balance of retained earnings. Applied will continue to evaluate the application of FIN 48. Management does not believe the effect of implementing FIN 48 will have a material impact on its financial position or results of operations.
 
Financial Condition, Liquidity and Capital Resources
 
Applied’s cash, cash equivalents and investments increased from $3.2 billion at October 29, 2006 to $3.7 billion at October 28, 2007, due primarily to cash generated from operating activities and proceeds from common stock issuances, offset by share repurchases, cash paid for acquisitions and cash dividend distributions. Applied has not undertaken any significant external financing activities for several years.


32


Table of Contents

Cash, cash-equivalents and investments consist of the following:
 
                 
    October 29,
    October 28,
 
    2006     2007  
    (In millions)  
 
Cash and cash equivalents
  $ 861     $ 1,203  
Short-term investments
    1,036       1,167  
Long-term investments
    1,315       1,362  
                 
Total cash, cash-equivalents and investments
  $ 3,212     $ 3,732  
                 
 
Applied generated cash from operating activities of $2.2 billion in fiscal 2007, $2.0 billion in fiscal 2006, and $1.3 billion in fiscal 2005. The primary sources of cash from operating activities were net income, as adjusted to exclude the effect of non-cash charges including depreciation, amortization, equity-based compensation, asset impairments and restructuring and IPR&D expenses, and changes in working capital levels, including accounts receivable and inventories. Applied utilized programs to discount letters of credit issued by customers of $431 million in fiscal 2007, $237 million in fiscal 2006, and $145 million in fiscal 2005. Discounting of letters of credit depends on many factors, including the willingness of financial institutions to discount the letters of credit and the cost of such arrangements. Days sales outstanding were 79 days at the end of fiscal 2007, compared to 80 days at the end of fiscal 2006 and 85 days at the end of fiscal 2005. The decrease in days sales outstanding in fiscal 2007 was primarily related to the change in the regional sales mix. Inventories decreased by $94 million in fiscal 2007, reflecting improved working capital management during a period of increased business volume and sales activity.
 
Applied used $977 million of cash for investing activities in fiscal 2007, generated $1.9 billion of cash for investing activities in fiscal 2006 and used $219 million of cash in investing activities in fiscal 2005. Purchases of investments, net of proceeds from sales and maturities of investments, totaled $150 million for fiscal 2007. Proceeds from sales and maturities of investments, net of purchases of investments, totaled $2.6 billion in fiscal 2006 and $83 million in fiscal 2005. Proceeds from the sale of investments in fiscal 2006 were used principally to fund Applied’s accelerated stock buyback.
 
Capital expenditures were $265 million in fiscal 2007, $179 million in fiscal 2006 and $200 million in fiscal 2005. Fiscal 2007 capital expenditures included investment in the implementation of an enterprise resource planning software system, and in Applied’s new global development capability center in Xi’an, China. Fiscal 2006 capital expenditures included purchases of lab equipment, network infrastructure and three buildings in Santa Clara, California that Applied had previously leased. Fiscal 2005 capital expenditures included investments in laboratory equipment and upgrades to Applied’s enterprise resource planning software and network architecture.
 
Investing activities also included investments in technology and acquisitions of companies to allow Applied to access new market opportunities or emerging technologies. During fiscal 2007, Applied acquired all of the outstanding shares of HCT for $463 million in cash, net of cash acquired, and certain net assets of Brooks Software for $137 million in cash. During fiscal 2006, Applied paid cash for acquisitions and the investment in a joint venture totaling $486 million. During fiscal 2006, Applied acquired the outstanding stock of Applied Films for $310 million in cash, net of cash and marketable securities acquired, and assumed equity awards with a fair value of $26 million, of which $18 million was included in the purchase price; formed a joint venture, Sokudo, with Dainippon Screen Mfg. Ltd., for which Applied paid $147 million in cash and contributed other assets; acquired certain assets of UMS Solutions for $10 million; and acquired ChemTrace for approximately $22 million in cash, net of cash acquired, of which $18 million was paid upon closing. During fiscal 2005, Applied paid $102 million, net of cash acquired, for the Metron and EcoSys acquisitions. See Note 12 of Notes to Consolidated Financial Statements for additional details.
 
On November 9, 2007, Applied purchased from Edwards Vacuum, Inc. certain assets of its Kachina semiconductor equipment parts cleaning and refurbishment business for $19 million. On November 19, 2007, Applied entered into an agreement to acquire all of the outstanding shares of Baccini S.p.A. (Baccini), a privately-held company based in Italy, for €225 million (or approximately $330 million at the exchange rate at the time of announcement) in cash, which is expected to close in early 2008.
 
Applied used cash of $892 million for financing activities in fiscal 2007, $4.1 billion in fiscal 2006, and $1.6 billion in fiscal 2005. Financing activities included issuances and repurchases of common stock and payment


33


Table of Contents

of dividends. Since March 1996, Applied has systematically repurchased shares of its common stock in the open market. Cash used to repurchase shares totaled $1.3 billion in fiscal 2007, $4.2 billion in fiscal 2006, and $1.7 billion in fiscal 2005. Beginning in the second quarter of fiscal 2005, Applied’s Board of Directors declared four consecutive quarterly cash dividends, in the amount of $0.03 per share each. The first two declared cash dividends totaling $98 million were paid during fiscal 2005. Beginning in the second quarter of fiscal 2006, Applied’s Board declared three consecutive quarterly cash dividends, in the amount of $0.05 per share each. Cash dividends totaling $251 million were paid during fiscal 2006. Beginning in the second quarter of fiscal 2007, Applied’s Board declared three consecutive quarterly cash dividends, in the amount of $0.06 per share each. Cash dividends totaling $306 million were paid during fiscal 2007. Applied currently anticipates that cash dividends will continue to be paid on a quarterly basis in the future, although the declaration of any future cash dividend is at the discretion of the Board of Directors and will depend on Applied’s financial condition, results of operations, capital requirements, business conditions and other factors, as well as a determination that cash dividends are in the best interests of Applied’stockholders. Financing activities also included borrowings and repayments of debt. Applied did not have any borrowings in fiscal years 2005, 2006 or 2007. As of October 28, 2007, Applied had credit facilities for unsecured borrowings in various currencies of up to approximately $1.2 billion, of which $1.0 billion is comprised of a 5-year revolving credit agreement with a group of banks that is scheduled to expire in January 2012. This agreement provides for borrowings at interest rates keyed to one of the two rates selected by Applied for each advance, and includes financial and other covenants with which Applied was in compliance at October 28, 2007. No amounts were outstanding under this agreement at October 28, 2007. Cash used for debt repayments totaled $202 million for fiscal 2007, $8 million for fiscal 2006, and $62 million for fiscal 2005. Cash generated from issuances of common stock pursuant to Applied’s equity compensation programs totaled $948 million for fiscal 2007, $361 million for fiscal 2006, and $266 million for fiscal 2005.
 
On September 18, 2006, Applied entered into accelerated stock buyback agreements with Goldman Sachs under which Applied agreed to repurchase from Goldman Sachs shares of Applied’s outstanding common stock for an initial purchase price of $2.5 billion. Under the agreements, Applied purchased 145 million shares of its common stock on September 18, 2006 at a price per share of $17.20, and Goldman Sachs agreed to purchase an equivalent number of shares in the open market over the following four months. At the end of the four month period, Applied was entitled or subject to a price adjustment based upon the volume weighted average price of Applied common stock during the purchase period. On January 24, 2007, Applied settled the price adjustment of $132 million by payment in cash to Goldman Sachs, resulting in an adjusted price per share of $18.08. The repurchase was funded with Applied’s existing cash and investments. The repurchased shares were reported as treasury stock.
 
At October 28, 2007, cash and cash equivalents included an aggregate investment of $147 million in an enhanced cash fund (the “Fund”). During the period between October 29, 2007 and December 6, 2007, Applied redeemed net $61 million of its investment in the Fund at par value (net of interim transactions). On December 6, 2007, the Fund’s manager notified Applied that: (1) cash redemptions were temporarily suspended, although redemptions could be fulfilled through a pro rata distribution of the underlying securities, consisting principally of high quality corporate debt, mortgage-backed securities and asset-backed securities; (2) the Fund’s valuation will be based on the market value of the underlying securities, whereas historically the Fund’s valuation was based on amortized cost; and (3) interest would continue to accrue. The estimated carrying value of Applied’s investment in the Fund at December 6, 2007 was $86 million and is not considered a cash equivalent due to the suspension of Fund redemptions. Applied expects to receive a pro rata distribution of the underlying securities in the Fund. Applied anticipates that this redemption will not result in a significant loss. The securities received on redemption will be subject to changes in value depending on market conditions.
 
Although cash requirements will fluctuate based on the timing and extent of factors such as those discussed above, Applied’s management believes that cash generated from operations, together with the liquidity provided by existing cash balances and borrowing capability, will be sufficient to satisfy Applied’s liquidity requirements for the next 12 months. For further details regarding Applied’s operating, investing and financing activities for each of the three years in the period ended October 28, 2007, see the Consolidated Statements of Cash Flows in this report.


34


Table of Contents

Off-Balance Sheet Arrangements
 
During the ordinary course of business, Applied provides standby letters of credit or other guarantee instruments to third parties as required for certain transactions initiated either by Applied or its subsidiaries. As of October 28, 2007, the maximum potential amount of future payments that Applied could be required to make under these guarantee agreements was approximately $194 million. Applied has not recorded any liability in connection with these guarantee arrangements below that required Applied to appropriately account for the underlying transaction being guaranteed. Applied does not believe, based on historical experience and information currently available, that it is probable that any amounts will be required to be paid under these guarantee arrangements.
 
Applied also has operating leases for various facilities. Total rental expense for operating leases was $62 million for fiscal 2007, $70 million for fiscal 2006, and $87 million for fiscal 2005.
 
Contractual Obligations
 
The following table summarizes Applied’s contractual obligations as of October 28, 2007:
 
                                         
    Payments Due by Period  
          Less Than
    1-3
    3-5
    More Than
 
Contractual Obligations
  Total     1 Year     Years     Years     5 Years  
    (In millions)  
 
Long-term debt obligations
  $ 205     $ 3     $ 2     $     $ 200  
Interest expense associated with long-term debt obligations
    143       14       29       29       71  
Operating lease obligations
    144       59       61       12       12  
Purchase obligations*
    1,264       1,263       1              
Other long-term liabilities
    204       8       81       18       97  
                                         
    $ 1,960     $ 1,347     $ 174     $ 59     $ 380  
                                         
 
 
* Represents Applied’s agreements to purchase goods and services consisting of Applied’s (a) outstanding purchase orders for goods and services; and (b) contractual requirements to make specified minimum payments even if Applied does not take delivery of the contracted goods.
 
Critical Accounting Policies and Estimates
 
The preparation of consolidated financial statements and related disclosures in conformity with accounting principles generally accepted in the United States of America requires management to make judgments, assumptions and estimates that affect the amounts reported. Note 1 of Notes to Consolidated Financial Statements describes the significant accounting policies used in the preparation of the consolidated financial statements. Certain of these significant accounting policies are considered to be critical accounting policies.
 
A critical accounting policy is defined as one that is both material to the presentation of Applied’s consolidated financial statements and requires management to make difficult, subjective or complex judgments that could have a material effect on Applied’s financial condition or results of operations. Specifically, these policies have the following attributes: (1) Applied is required to make assumptions about matters that are highly uncertain at the time of the estimate; and (2) different estimates Applied could reasonably have used, or changes in the estimate that are reasonably likely to occur, would have a material effect on Applied’s financial condition or results of operations.
 
Estimates and assumptions about future events and their effects cannot be determined with certainty. Applied bases its estimates on historical experience and on various other assumptions believed to be applicable and reasonable under the circumstances. These estimates may change as new events occur, as additional information is obtained and as Applied’s operating environment changes. These changes have historically been minor and have been included in the consolidated financial statements as soon as they became known. In addition, management is periodically faced with uncertainties, the outcomes of which are not within its control and will not be known for prolonged periods of time. These uncertainties are discussed in the section above entitled “Risk Factors.” Based on a critical assessment of its accounting policies and the underlying judgments and uncertainties affecting the


35


Table of Contents

application of those policies, management believes that Applied’s consolidated financial statements are fairly stated in accordance with accounting principles generally accepted in the United States of America, and provide a meaningful presentation of Applied’s financial condition and results of operations.
 
Management believes that the following are critical accounting policies:
 
Warranty Costs
 
Applied provides for the estimated cost of warranty when revenue is recognized. Estimated warranty costs are determined by analyzing specific product and historical configuration statistics and regional warranty support costs. Applied’s warranty obligation is affected by product and component failure rates, material usage and labor costs incurred in correcting product failures during the warranty period. As Applied’s customer engineers and process support engineers are highly trained and deployed globally, labor availability is a significant factor in determining labor costs. The quantity and availability of critical replacement parts is another significant factor in estimating warranty costs. Unforeseen component failures or exceptional component performance can also result in changes to warranty costs. If actual warranty costs differ substantially from Applied’s estimates, revisions to the estimated warranty liability would be required, which could have a material adverse effect on Applied’s business, financial condition and results of operations.
 
Inventory Valuation
 
Inventories are generally stated at the lower of cost or market, with cost determined on a first-in, first-out basis. The carrying value of inventory is reduced for estimated obsolescence by the difference between its cost and the estimated market value based upon assumptions about future demand. Applied evaluates the inventory carrying value for potential excess and obsolete inventory exposures by analyzing historical and anticipated demand. In addition, inventories are evaluated for potential obsolescence due to the effect of known and anticipated engineering change orders and new products. If actual demand were to be substantially lower than estimated, additional inventory adjustments for excess or obsolete inventory might be required, which could have a material adverse effect on Applied’s business, financial condition and results of operations.
 
Goodwill and Intangible Assets
 
Applied reviews goodwill and intangible assets for impairment whenever events or changes in circumstances indicate that the carrying amount of these assets may not be recoverable, and also reviews goodwill and intangibles with indefinite lives annually for impairment. Intangible assets, such as purchased technology, are generally recorded in connection with a business acquisition. The value assigned to intangible assets is usually based on estimates and judgments regarding expectations for the success and life cycle of products and technology acquired. If actual product acceptance differs significantly from the estimates, Applied may be required to record an impairment charge to write down the asset to its realizable value. The fair value of a reporting unit is estimated using the market multiples approach, and is dependent on market values for companies in a similar industry. A severe decline in market value could result in an unexpected impairment charge for impaired goodwill, which could have a material adverse effect on Applied’s business, financial condition and results of operations.
 
Income Taxes
 
Applied accounts for income taxes by recognizing deferred tax assets and liabilities using statutory tax rates for the effect of temporary differences between the book and tax bases of recorded assets and liabilities, net operating losses and tax credit carryforwards. Deferred tax assets are also reduced by a valuation allowance if it is more likely than not that a portion of the deferred tax asset will not be realized. Management has determined that it is more likely than not that its future taxable income will be sufficient to realize its deferred tax assets.
 
The effective tax rate is highly dependent upon the geographic composition of worldwide earnings, tax regulations governing each region, non-tax deductible expenses incurred in connection with acquisitions and availability of tax credits. Management carefully monitors the changes in many factors and adjusts the effective income tax rate as required. If actual results differ from these estimates, Applied could be required to record a valuation allowance on deferred tax assets or adjust its effective income tax rate, which could have a material adverse effect on Applied’s business, financial condition and results of operations.


36


Table of Contents

The calculation of tax liabilities involves significant judgment in estimating the impact of uncertainties in the application of complex tax laws. Resolution of these uncertainties in a manner inconsistent with Applied’s expectations could have a material impact on Applied’s results of operations and financial condition.
 
Legal Matters
 
Applied is subject to various legal proceedings and claims, either asserted or unasserted, that arise in the ordinary course of business. Applied evaluates, among other factors, the degree of probability of an unfavorable outcome and reasonably estimates the amount of the loss. Significant judgment is required in both the probability determination and as to whether an exposure can be reasonably estimated. When Applied determines that it is probable that a loss has been incurred and the amount is reasonably estimable, the effect is recorded in the consolidated financial statements. Although the outcome of these claims cannot be predicted with certainty, Applied does not believe that any of the existing legal matters will have a material adverse effect on its financial condition or results of operations. However, significant changes in legal proceedings and claims, or the factors considered in the evaluation of those matters, could have a material adverse effect on Applied’s business, financial condition and results of operations.
 
Equity-Based Compensation — Employee Stock Option Plans and Employee Stock Purchase Plans
 
Beginning on October 31, 2005, Applied began accounting for stock options and Employee Stock Purchase Plan (ESPP) shares under the provisions of Statement of Financial Accounting Standards No. 123(R), “Share-Based Payment” (SFAS 123(R)), which requires recognition of the fair value of equity-based compensation. The fair value of stock options and ESPP shares was estimated using a Black-Scholes option valuation model. This methodology requires the use of subjective assumptions in implementing SFAS 123(R), including expected stock price volatility and the estimated life of each award. The fair value of equity-based compensation awards less the estimated forfeitures is amortized over the service period of the award, and Applied has elected to use the straight-line method. Prior to the implementation of SFAS 123(R), Applied accounted for stock options and ESPP shares under the provisions of Accounting Principles Board Opinion No. 25, “Accounting for Stock Issued to Employees,” (APB 25) and made pro forma footnote disclosures as required by SFAS No. 148, “Accounting For Stock-Based Compensation — Transition and Disclosure — an Amendment of FASB Statement No. 123,” which amended SFAS No. 123, “Accounting For Stock-Based Compensation.” Pro forma net income and pro forma net income per share disclosed in the footnotes to the Consolidated Financial Statements were estimated using a Black-Scholes option valuation model. The fair value of restricted stock units was calculated based upon the fair market value of Applied’s common stock at the date of grant (see Note 1 of Notes to Consolidated Financial Statements).
 
Item 7A:   Quantitative and Qualitative Disclosures About Market Risk
 
Interest Rate Risk
 
At October 28, 2007, Applied’s investment portfolio included fixed-income securities with a fair value of approximately $2.6 billion. Applied’s primary objective for investing in fixed-income securities is to preserve principal while maximizing returns and minimizing risk. These securities are subject to interest rate risk and will decline in value if interest rates increase. Based on Applied’s investment portfolio at October 28, 2007 and October 29, 2006, an immediate 100 basis point increase in interest rates would result in a decrease in the fair value of the portfolio of approximately $31 million and $28 million, respectively. While an increase in interest rates reduces the fair value of the investment portfolio, Applied will not realize the losses in the Consolidated Statement of Operations unless the individual fixed-income securities are sold prior to recovery or the loss is determined to be other-than-temporarily impaired.
 
All of Applied’s debt bears interest at fixed rates. Therefore, an immediate 100 basis point increase in interest rates would not be expected to have a material effect on Applied’s near-term financial condition or results of operations.
 
Foreign Currency Exchange Rate Risk
 
Certain operations of Applied are conducted in foreign currencies, such as Japanese yen, euro, Israeli shekel and Swiss francs. Applied enters into forward exchange and currency option contracts to hedge a portion of, but not all, existing and anticipated foreign currency denominated transactions expected to occur typically within


37


Table of Contents

12 months. Gains and losses on these contracts are generally recognized in the Consolidated Statements of Operations at the time that the related transactions being hedged are recognized. Because the effect of movements in currency exchange rates on forward exchange and currency option contracts generally offsets the related effect on the underlying items being hedged, these financial instruments are not expected to subject Applied to risks that would otherwise result from changes in currency exchange rates. Applied does not use derivative financial instruments for trading or speculative purposes. Net foreign currency gains and losses did not have a material effect on Applied’s results of operations for fiscal 2005, 2006 or 2007.
 
Forward exchange contracts are denominated in the same currency as the underlying transactions (primarily Japanese yen, euro, Israeli shekel and Swiss francs), and the terms of the forward exchange contracts generally match the terms of the underlying transactions. Applied’s outstanding forward exchange contracts are marked-to-market (see Note 2 of Notes to Consolidated Financial Statements), as are the majority of the related underlying transactions being hedged; therefore, the effect of exchange rate changes on forward exchange contracts is expected to be substantially offset by the effect of these changes on the underlying transactions. The effect of an immediate 10 percent change in exchange rates on forward exchange contracts and the underlying hedged transactions is not expected to be material to Applied’s near-term financial condition or results of operations. Applied’s risk with respect to currency option contracts is limited to the premium paid for the right to exercise the option. Premiums paid for options outstanding at October 28, 2007 were not material.
 
Item 8:   Financial Statements and Supplementary Data
 
The consolidated financial statements required by this Item are set forth on the pages indicated at Item 15(a).
 
Item 9:   Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
 
None.
 
Item 9A:   Controls and Procedures
 
Disclosure Controls and Procedures.  As of the end of the period covered by this report, management of Applied conducted an evaluation, under the supervision and with the participation of Applied’s Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of Applied’s disclosure controls and procedures, as such term is defined in Rule 13a-15(e) of the Securities Exchange Act of 1934 (the Exchange Act). Based upon that evaluation, Applied’s Chief Executive Officer and Chief Financial Officer concluded that Applied’s disclosure controls and procedures were effective as of the end of the period covered by this report in ensuring that information required to be disclosed was recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and to provide reasonable assurance that information required to be disclosed by Applied in such reports is accumulated and communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.
 
Management’s Report on Internal Control over Financial Reporting.   Applied’s management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rule 13a-15(f) of the Exchange Act. Under the supervision and with the participation of Applied’s Chief Executive Officer and Chief Financial Officer, management of Applied conducted an evaluation of the effectiveness of Applied’s internal control over financial reporting based upon the framework in “Internal Control — Integrated Framework” issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on that evaluation, Applied’s management concluded that Applied’s internal control over financial reporting was effective as of October 28, 2007.
 
KPMG LLP, an independent registered public accounting firm, has audited the consolidated financial statements included in this Annual Report on Form 10-K and, as part of the audit, has issued a report, included herein, on the effectiveness of Applied’s internal control over financial reporting as of October 28, 2007.


38


Table of Contents

Changes in Internal Control over Financial Reporting.  During the fourth quarter of fiscal 2007, there were no changes in the internal control over financial reporting that materially affected, or are reasonably likely to materially affect, Applied’s internal control over financial reporting.
 
Inherent Limitations of Disclosure Controls and Procedures and Internal Control over Financial Reporting.  It should be noted that any system of controls, however well designed and operated, can provide only reasonable, and not absolute, assurance that the objectives of the system will be met. In addition, the design of any control system is based in part upon certain assumptions about the likelihood of future events.
 
Item 9B:   Other Information
 
None.


39


Table of Contents

 
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
The Stockholders and Board of Directors
Applied Materials, Inc.:
 
We have audited Applied Materials, Inc. and subsidiaries’ (the Company) internal control over financial reporting as of October 28, 2007, based on criteria established in Internal Control— Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting included in Item 9A. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.
 
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
 
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
 
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
 
In our opinion, Applied Materials Inc. and subsidiaries maintained, in all material respects, effective internal control over financial reporting as of October 28, 2007, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission.
 
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Applied Materials, Inc. and subsidiaries as of October 28, 2007 and October 29, 2006, and the related consolidated statements of operations, stockholders’ equity and comprehensive income, and cash flows for each of the years in the three-year period ended October 28, 2007. In connection with our audits of the consolidated financial statements, we have also audited the financial statement schedule as of and for each of the years in the three-year period ended October 28, 2007. Our report dated December 14, 2007 expressed an unqualified opinion on those consolidated financial statements and financial statement schedule.
 
/s/  KPMG LLP
KPMG LLP
 
Mountain View, California
December 14, 2007


40


Table of Contents

 
PART III
 
Pursuant to Paragraph G(3) of the General Instructions to Form 10-K, portions of the information required by Part III of Form 10-K are incorporated by reference from Applied’s Proxy Statement to be filed with the SEC in connection with the 2008 Annual Meeting of Stockholders (the Proxy Statement).
 
Item 10:   Directors, Executive Officers and Corporate Governance
 
(1) Information concerning directors, including director nominations, and Applied’s audit committee and audit committee financial expert, appears in the Proxy Statement under “Election of Directors,” and is incorporated herein by reference.
 
(2) For information with respect to Executive Officers, see Part I, Item 1 of this Annual Report on Form 10-K, under “Executive Officers of the Registrant.”
 
(3) Information concerning Section 16(a) beneficial ownership reporting compliance appears in the Proxy Statement under “Section 16(a) Beneficial Ownership Reporting Compliance,” and is incorporated herein by reference.
 
Applied has implemented the Standards of Business Conduct, a code of ethics with which every person who works for Applied and every member of the Board of Directors is expected to comply. If any substantive amendments are made to the Standards of Business Conduct or any waiver is granted, including any implicit waiver, from a provision of the code to Applied’s Chief Executive Officer, Chief Financial Officer or Chief Accounting Officer, Applied will disclose the nature of such amendment or waiver on its website or in a report on Form 8-K. The above information, including the Standards of Business Conduct, is available on Applied’s website under the Investors section at http://www.appliedmaterials.com/investors/index.html. This website address is intended to be an inactive, textual reference only. None of the material on this website is part of this report.
 
Item 11:   Executive Compensation
 
Information concerning executive compensation appears in the Proxy Statement under “Executive Compensation and Related Information” and is incorporated herein by reference.
 
Information concerning compensation committee interlocks and insider participation appears in the Proxy Statement under “Compensation Committee Interlocks and Insider Participation” and is incorporated herein by reference.
 
Information concerning the compensation committee report appears in the Proxy Statement under “Human Resources and Compensation Committee Report” and is incorporated herein by reference.
 
Item 12:   Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
 
Information concerning the security ownership of certain beneficial owners and management appears in the Proxy Statement, under “Principal Stockholders,” and is incorporated herein by reference.


41


Table of Contents

The following table summarizes information with respect to options and other equity awards under Applied’s equity compensation plans as of October 28, 2007:
 
Equity Compensation Plan Information
 
                         
                (c)
 
    (a)
          Number of Securities
 
    Number of
    (b)
    Available for Future
 
    Securities to be
    Weighted Average
    Issuance Under Equity
 
    Issued Upon Exercise
    Exercise Price of
    Compensation Plans
 
    of Outstanding Options,
    Outstanding Options,
    (Excluding Securities
 
    Warrants and
    Warrants and
    Reflected in
 
Plan Category
  Rights(1)     Rights(2)     Column(a))  
    (In thousands, except prices)  
 
Equity compensation plans approved by security holders
    43,478     $ 17.79       197,690 (3)
Equity compensation plans not approved by security holders
    70,020 (4)   $ 17.82       34,992 (5)
                         
Total
    113,498     $ 17.81       232,682  
                         
 
 
(1) Includes only options and restricted stock units (referred to as “performance shares” under the Applied Materials, Inc. Employee Stock Incentive Plan) outstanding under Applied’s equity compensation plans, as no stock warrants or other rights were outstanding as of October 28, 2007.
 
(2) The weighted average exercise price calculation does not take into account any restricted stock units as they have a de minimis purchase price.
 
(3) Includes 73,781 shares of Applied common stock available for future issuance under the Applied Materials, Inc. Employees’ Stock Purchase Plan. Of these 73,781 shares, 1,788 are subject to purchase during the purchase period in effect as of October 28, 2007.
 
(4) Includes options to purchase 2,363 shares of Applied common stock and 21,987 shares of Applied common stock underlying restricted stock units assumed through various mergers and acquisitions, after giving effect to the applicable exchange ratios. The assumed options had a weighted average exercise price of $13.32 per share. No further shares are available for issuance under the plans under which these assumed awards were granted.
 
(5) Includes 2,578 shares of Applied common stock available for future issuance under the Applied Materials, Inc. Stock Purchase Plan for Offshore Employees. Of these 2,578 shares, 693 are subject to purchase during the purchase period in effect as of October 28, 2007.
 
Applied has the following equity compensation plans that have not been approved by stockholders:
 
2000 Global Equity Incentive Plan The 2000 Global Equity Incentive Plan (the 2000 Plan) was adopted effective as of June 21, 2000. The 2000 Plan provides for the grant of non-qualified stock options to employees other than officers and directors. The administrator of the 2000 Plan (either the Board of Directors of Applied or a committee appointed by the Board) determines the terms and conditions of all stock options granted; provided, however, that (1) the exercise price generally may not be less than 100 percent of the fair market value (on the date of grant) of the stock covered by the option, and (2) the term of options can be no longer than 10 years (or 13 years in the event of death). A total of 147,000,000 shares have been authorized for issuance under the 2000 Plan, and 32,414,000 shares remain available for issuance as of October 28, 2007.
 
Stock Purchase Plan for Offshore Employees The Stock Purchase Plan for Offshore Employees (the Offshore ESPP) was adopted effective as of October 16, 1995 for the benefit of employees of Applied’s participating affiliates (other than United States citizens or residents). The Offshore ESPP provides for the grant of options to purchase shares of Applied common stock through payroll deductions pursuant to one or more offerings. The administrator of the Offshore ESPP (the Board of Directors of Applied or a committee appointed by the Board) determines the terms and conditions of all options prior to the start of an offering, including the purchase price of shares, the number of shares covered by the option and when the option may be exercised. All options granted as part of an offering must be granted on the same date. A total of


42


Table of Contents

12,800,000 shares have been authorized for issuance under the Offshore ESPP, and 2,578,000 shares remain available for issuance as of October 28, 2007.
 
Item 13:   Certain Relationships and Related Transactions, and Director Independence
 
The information appearing in the Proxy Statement under the heading “Certain Relationships and Related Transactions” is incorporated herein by reference.
 
The information appearing in the Proxy Statement under the heading “Director Independence” is incorporated herein by reference.
 
Item 14:   Principal Accounting Fees and Services
 
Information concerning principal accounting fees and services and the audit committee’s preapproval policies and procedures appears in the Proxy Statement under the headings “Fees Paid to KPMG LLP” and “Policy and Audit Committee’s Pre-Approval of Audit and Permisssible Non-audit Services of Independent Registered Public Accounting Firm,” is incorporated herein by reference.


43


Table of Contents

 
PART IV
 
Item 15:   Exhibits and Financial Statement Schedules
 
(a) The following documents are filed as part of this Annual Report on Form 10-K:
 
                 
        Page
        Number
 
 
(1)
    Financial Statements:        
        Consolidated Statements of Operations for each of the three years in the period ended October 28, 2007     45  
        Consolidated Balance Sheets at October 29, 2006 and October 28, 2007     46  
        Consolidated Statements of Stockholders’ Equity and Comprehensive Income for each of the three years in the period ended October 28, 2007     47  
        Consolidated Statements of Cash Flows for each of the three years in the period ended October 28, 2007     48  
        Notes to Consolidated Financial Statements     49  
        Report of KPMG LLP, Independent Registered Public Accounting Firm     83  
 
(2)
    Financial Statement Schedule:        
        Schedule II — Valuation and Qualifying Accounts for each of the three years in the period ended October 28, 2007     90  
 
(3)
    Exhibits:        
        The exhibits listed in the accompanying Index to Exhibits are filed or incorporated by reference as part of this Annual Report on Form 10-K     84  
 
All other schedules are omitted because they are not applicable or the required information is shown in the Consolidated Financial Statements or Notes thereto.


44


Table of Contents

APPLIED MATERIALS, INC.
 
CONSOLIDATED STATEMENTS OF OPERATIONS
 
                         
    October 30,
    October 29,
    October 28,
 
Fiscal Year
  2005     2006     2007  
    (In thousands, except per share amounts)  
 
Net sales
  $ 6,991,823     $ 9,167,014     $ 9,734,856  
Cost of products sold
    3,905,949       4,875,212       5,242,413  
                         
Gross margin
    3,085,874       4,291,802       4,492,443  
Operating expenses:
                       
Research, development and engineering
    940,507       1,152,326       1,142,073  
Marketing and selling
    358,524       438,654       451,258  
General and administrative
    338,878       468,088       501,185  
Restructuring and asset impairments
          212,113       26,421  
                         
Income from operations
    1,447,965       2,020,621       2,371,506  
Pretax loss of equity-method investment
          2,849       29,371  
Interest expense
    37,819       36,096       38,631  
Interest income
    171,423       185,295       136,149  
                         
Income before income taxes
    1,581,569       2,166,971       2,439,653  
Provision for income taxes
    371,669       650,308       729,457  
                         
Net income
  $ 1,209,900     $ 1,516,663     $ 1,710,196  
                         
Earnings per share:
                       
Basic
  $ 0.74     $ 0.98     $ 1.22  
Diluted
  $ 0.73     $ 0.97     $ 1.20  
Weighted average number of shares:
                       
Basic
    1,645,531       1,551,339       1,406,685  
Diluted
    1,657,493       1,565,072       1,427,002  
 
See accompanying Notes to Consolidated Financial Statements.


45


Table of Contents

APPLIED MATERIALS, INC.
 
CONSOLIDATED BALANCE SHEETS
 
                 
    October 29,
    October 28,
 
    2006     2007  
    (In thousands, except per share amounts)  
 
ASSETS
Current assets:
               
Cash and cash equivalents
  $ 861,463     $ 1,202,722  
Short-term investments
    1,035,875       1,166,857  
Accounts receivable, less allowance for doubtful accounts of $3,342 and $4,136 at 2006 and 2007, respectively
    2,026,199       2,049,427  
Inventories
    1,406,777       1,313,237  
Deferred income taxes
    455,473       424,502  
Assets held for sale
    37,211        
Other current assets
    258,021       448,879  
                 
Total current assets
    6,081,019       6,605,624  
Long-term investments
    1,314,861       1,362,425  
Property, plant and equipment
    2,753,883       2,782,204  
Less: accumulated depreciation and amortization
    (1,729,589 )     (1,730,962 )
                 
Net property, plant and equipment
    1,024,294       1,051,242  
Goodwill, net
    572,558       1,000,176  
Purchased technology and other intangible assets, net
    201,066       373,178  
Equity-method investment
    144,431       115,060  
Deferred income taxes and other assets
    142,608       146,370  
                 
Total assets
  $ 9,480,837     $ 10,654,075  
                 
 
LIABILITIES AND STOCKHOLDERS’ EQUITY
Current liabilities:
               
Current portion of long-term debt
  $ 202,535     $ 2,561  
Accounts payable and accrued expenses
    2,023,651       2,213,313  
Income taxes payable
    209,859       157,549  
                 
Total current liabilities
    2,436,045       2,373,423  
Long-term debt
    204,708       202,281  
Other liabilities
    188,684       256,962  
                 
Total liabilities
    2,829,437       2,832,666  
                 
Commitments and contingencies (Note 11)
               
Stockholders’ equity:
               
Preferred stock: $.01 par value per share; 1,000 shares authorized; no shares issued
           
Common stock: $.01 par value per share; 2,500,000 shares authorized; 1,391,730 and 1,385,711 shares outstanding at 2006 and 2007, respectively
    13,917       13,857  
Additional paid-in capital
    3,678,202       4,658,832  
Retained earnings
    9,472,303       10,863,291  
Treasury stock: 378,435 and 434,686 shares at 2006 and 2007, respectively, net
    (6,494,012 )     (7,725,924 )
Accumulated other comprehensive income (loss)
    (19,010 )     11,353  
                 
Total stockholders’ equity
    6,651,400       7,821,409  
                 
Total liabilities and stockholders’ equity
  $ 9,480,837     $ 10,654,075  
                 
 
See accompanying Notes to Consolidated Financial Statements.


46


Table of Contents

APPLIED MATERIALS, INC.
 
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY
AND COMPREHENSIVE INCOME
 
                                                                 
                                        Accumulated
       
                Additional
    Deferred
                Other
       
    Common Stock     Paid-In
    Stock
    Retained
    Treasury
    Comprehensive
       
    Shares     Amount     Capital     Compensation     Earnings     Stock     Income/(Loss)     Total  
    (In thousands)  
 
Balance at October 31, 2004
    1,680,264     $ 16,803     $ 2,882,775     $ (96 )   $ 7,164,170     $ (812,042 )   $ 10,417     $ 9,262,027  
Components of comprehensive income:
                                                               
Net income
                            1,209,900                   1,209,900  
Change in unrealized net loss on investments
                                        (33,053 )     (33,053 )
Change in unrealized net gain on derivative instruments
                                        8,561       8,561  
Change in minimum pension liability
                                        (17,868 )     (17,868 )
Translation adjustments
                                        (5,305 )     (5,305 )
                                                                 
Comprehensive income
                                                            1,162,235  
Dividends
                            (146,277 )                 (146,277 )
Equity-based compensation
                55                               55  
Issuance under stock plans, including tax benefits of $84,294
    27,638       276       278,223                   71,910             350,409  
Amortization of deferred stock compensation
                      96                         96  
Treasury stock repurchases
    (101,208 )     (1,012 )                       (1,698,984 )           (1,699,996 )
                                                                 
Balance at October 30, 2005
    1,606,694     $ 16,067     $ 3,161,053     $     $ 8,227,793     $ (2,439,116 )   $ (37,248 )   $ 8,928,549  
Components of comprehensive income:
                                                               
Net income
                            1,516,663                   1,516,663  
Change in unrealized net gain on investments
                                        16,486       16,486  
Change in unrealized net gain on derivative instruments
                                        (4,888 )     (4,888 )
Change in minimum pension liability
                                        (117 )     (117 )
Translation adjustments
                                        6,757       6,757  
                                                                 
Comprehensive income
                                                          1,534,901  
Dividends
                            (272,153 )                 (272,153 )
Equity-based compensation
                216,269                               216,269  
Issuance under stock plans, including tax benefits of $23,664 and other
    23,433       234       282,587                   77,958             360,779  
Assumption of Applied Films equity plans
                18,293                               18,293  
Treasury stock repurchases
    (238,397 )     (2,384 )                       (4,132,854 )           (4,135,238 )
                                                                 
Balance at October 29, 2006
    1,391,730     $ 13,917     $ 3,678,202     $     $ 9,472,303     $ (6,494,012 )   $ (19,010 )   $ 6,651,400  
Components of comprehensive income:
                                                               
Net income
                            1,710,196                   1,710,196  
Change in unrealized net loss on investments
                                        21,887       21,887  
Change in unrealized net gain on derivative instruments
                                        (5,728 )     (5,728 )
Change in minimum pension liability
                                        3,462       3,462  
Change in retiree medical benefit
                                        (1,132 )     (1,132 )
Translation adjustments
                                        9,583       9,583  
                                                                 
Comprehensive income
                                                          1,738,268  
Adjustment to initially apply SFAS 158, net of tax of $959
                                        2,291       2,291  
Dividends
                            (319,208 )                 (319,208 )
Equity-based compensation
                161,196                               161,196  
Issuance under stock plans, including tax benefits of $48,870 and other
    54,391       544       819,434                   99,481             919,459  
Treasury stock repurchases
    (60,410 )     (604 )                         (1,331,393 )           (1,331,997 )
                                                                 
Balance at October 28, 2007
    1,385,711     $ 13,857     $ 4,658,832     $     $ 10,863,291     $ (7,725,924 )   $ 11,353     $ 7,821,409  
                                                                 
 
See accompanying Notes to Consolidated Financial Statements.


47


Table of Contents

APPLIED MATERIALS, INC.
 
CONSOLIDATED STATEMENTS OF CASH FLOWS
 
                         
    October 30,
    October 29,
    October 28,
 
Fiscal Year
  2005     2006     2007  
    (In thousands)  
 
Cash flows from operating activities:
                       
Net income
  $ 1,209,900     $ 1,516,663     $ 1,710,196  
Adjustments required to reconcile net income to cash provided by operating activities:
                       
Depreciation and amortization
    300,433       270,413       268,334  
Loss on fixed asset retirements
    22,553       28,365       21,401  
Restructuring and asset impairments
          212,113       26,421  
Acquired in-process research and development expense
          14,000       4,900  
Pretax loss of equity-method investment
          2,849       29,371  
Net recognized loss on investments
    39,581       41,391       5,460  
Deferred income taxes
    20,310       25,323       31,642  
Excess tax benefits from equity-based compensation plans
          (23,664 )     (49,794 )
Tax benefit from equity-based compensation plans
    84,294              
Amortization of deferred compensation
    96              
Equity-based compensation
    55       216,269       161,197  
Changes in operating assets and liabilities, net of amounts acquired:
                       
Accounts receivable, net
    86,959       (393,022 )     34,259  
Inventories
    130,924       (222,335 )     140,933  
Other current assets
    48,315       25,224       (164,289 )
Other assets
    (10,415 )     17,088       3,359  
Accounts payable and accrued expenses
    (444,858 )     237,952       (12,473 )
Income taxes payable
    (217,851 )     100,020       (23,968 )
Other liabilities
    16,425       (91,531 )     22,347  
                         
Cash provided by operating activities
    1,286,721       1,977,118       2,209,296  
                         
Cash flows from investing activities:
                       
Capital expenditures
    (199,650 )     (179,482 )     (264,784 )
Cash paid for acquisitions, net of cash acquired
    (101,793 )     (339,093 )     (599,653 )
Investment in equity-method investment
          (147,280 )      
Proceeds from disposition of assets
          1,863        
Proceeds from disposition of assets held for sale
          16,206       37,611  
Proceeds from sales and maturities of investments
    6,090,477       6,071,156       3,053,640  
Purchases of investments
    (6,007,738 )     (3,474,384 )     (3,203,427 )
                         
Cash (used for)/provided by investing activities
    (218,704 )     1,948,986       (976,613 )
                         
Cash flows used for financing activities:
                       
Short-term debt repayments
    (13,290 )     (7,710 )     (99 )
Long-term debt repayments
    (48,425 )           (202,040 )
Proceeds from common stock issuances
    266,115       337,106       898,025  
Common stock repurchases
    (1,677,511 )     (4,157,725 )     (1,331,997 )
Excess tax benefit from equity-based compensation plans
          23,664       49,794  
Payments of dividends to stockholders
    (98,040 )     (250,782 )     (305,672 )
                         
Cash used for financing activities
    (1,571,151 )     (4,055,447 )     (891,989 )
                         
Effect of exchange rate changes on cash and cash equivalents
    184       464       565  
                         
Increase/(decrease) in cash and cash equivalents
    (502,950 )     (128,879 )     341,259  
Cash and cash equivalents — beginning of year
    1,493,292       990,342       861,463  
                         
Cash and cash equivalents — end of year
  $ 990,342     $ 861,463     $ 1,202,722  
                         
Supplemental cash flow information:
                       
Cash payments for income taxes, net
  $ 374,302     $ 549,531     $ 845,756  
Cash payments for interest
  $ 32,171     $ 28,195     $ 29,104  
 
See accompanying Notes to Consolidated Financial Statements.


48


Table of Contents

APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
 
Note 1   Summary of Significant Accounting Policies
 
Principles of Consolidation and Basis of Presentation The consolidated financial statements include the accounts of Applied Materials, Inc. and its subsidiaries (Applied or the Company) after elimination of intercompany balances and transactions. All references to a fiscal year apply to Applied’s fiscal year which ends on the last Sunday in October. Fiscal 2005, 2006 and 2007 contained 52 weeks each. Each fiscal quarter of 2005, 2006 and 2007 contained 13 weeks.
 
The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. Actual results could differ materially from those estimates.
 
Reclassifications The accompanying consolidated financial statements for fiscal 2005 and fiscal 2006 contain certain reclassifications to conform to the fiscal 2007 presentation.
 
In fiscal 2007, Applied changed its presentation of accretion of discounts and amortization of premiums on its investment portfolio and gains and losses on sales of investments in the Consolidated Statements of Cash Flows. This revision did not result in material changes to operating cash flows in the accompanying Consolidated Statements of Cash Flows. The accompanying consolidated financial statements for prior year amounts have been conformed to the fiscal 2007 presentation.
 
Cash Equivalents and Investments All highly-liquid investments with a remaining maturity of three months or less at the time of purchase are considered to be cash equivalents. All of Applied’s investments are classified as available-for-sale at the respective balance sheet dates. Investments classified as available-for-sale are recorded at fair value based upon quoted market prices, and any temporary difference between the cost and fair value of an investment is presented as a separate component of accumulated other comprehensive income/(loss). The specific identification method is used to determine the gains and losses on investments.
 
Inventories Inventories are generally stated at the lower of cost or market, with cost determined on a FIFO basis.
 
Property, Plant and Equipment Property, plant and equipment is stated at cost. Depreciation is provided over the estimated useful lives of the assets using the straight-line method. Estimated useful lives for financial reporting purposes are as follows: buildings and improvements, 3 to 30 years; demonstration and manufacturing equipment, 3 to 5 years; software, 3 to 5 years; and furniture, fixtures and other equipment, 3 to 15 years. Land improvements are amortized over the shorter of 15 years or the estimated useful life. Leasehold improvements are amortized over the shorter of five years or the lease term.
 
Intangible Assets Goodwill and indefinite-lived assets are not amortized, but are reviewed for impairment annually during the fourth quarter of each fiscal year. Purchased technology and other intangible assets are presented at cost, net of accumulated amortization, and are amortized over their estimated useful lives of 1 to 15 years using the straight-line method.
 
Long-Lived Assets Applied reviews long-lived assets for impairment whenever events or changes in circumstances indicate that the carrying amount of these assets may not be recoverable. Applied assesses these assets for impairment based on estimated future cash flows from these assets.
 
Research, Development and Engineering Costs Research, development and engineering costs are expensed as incurred.
 
Advertising Costs Advertising costs are expensed as incurred. Advertising costs were not material for all periods presented.


49


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Sales and Value Added Taxes Taxes collected from customers and remitted to governmental authorities are presented on a net basis in the accompanying Consolidated Statements of Operations.
 
Income Taxes Income tax expense is based on pretax earnings. Deferred tax assets and liabilities are recognized for the expected tax consequences of temporary differences between the book and tax bases of recorded assets and liabilities, net operating losses and tax credit carryforwards.
 
Revenue Recognition Applied recognizes revenue when all four revenue recognition criteria have been met: persuasive evidence of an arrangement exists; delivery has occurred or services have been rendered; seller’s price to buyer is fixed or determinable; and collectability is reasonably assured. Applied’s shipping terms are customarily FOB Applied shipping point or equivalent terms. Applied’s revenue recognition policy generally results in revenue recognition at the following points: (1) for all transactions where legal title passes to the customer upon shipment, Applied recognizes revenue upon shipment for all products that have been demonstrated to meet product specifications prior to shipment; the portion of revenue associated with certain installation-related tasks is deferred based on the estimated fair value, and that revenue is recognized upon completion of the installation-related tasks; (2) for products that have not been demonstrated to meet product specifications prior to shipment, revenue is recognized at customer technical acceptance; (3) for transactions where legal title does not pass at shipment, revenue is recognized when legal title passes to the customer, which is typically at customer technical acceptance; and (4) for arrangements containing multiple elements, the revenue relating to the undelivered elements is deferred at estimated fair value until delivery of the deferred elements. In cases where Applied has sold products that have been demonstrated to meet product specifications prior to shipment, Applied believes that at the time of delivery, it has an enforceable claim to amounts recognized as revenue. Spare parts revenue is generally recognized upon shipment, and services revenue is generally recognized over the period that the services are provided.
 
Derivative Financial Instruments Applied uses financial instruments, such as forward exchange and currency option contracts, to hedge a portion of, but not all, existing and anticipated foreign currency denominated transactions typically expected to occur within 12 months. The terms of currency instruments used for hedging purposes are generally consistent with the timing of the transactions being hedged. The purpose of Applied’s foreign currency management is to mitigate the effect of exchange rate fluctuations on certain foreign currency denominated revenues, costs and eventual cash flows. All of Applied’s derivative financial instruments are recorded at fair value based upon quoted market prices for comparable instruments. For derivative instruments designated and qualifying as cash flow hedges of anticipated foreign currency denominated transactions, the effective portion of the gain or loss on these hedges is reported as a component of accumulated other comprehensive income/(loss) in stockholders’ equity, and is reclassified into earnings when the hedged transaction affects earnings. If the transaction being hedged fails to occur, or if a portion of any derivative is ineffective, the gain or loss on the associated financial instrument is recorded promptly in earnings. For derivative instruments used to hedge existing foreign currency denominated assets or liabilities, the gain or loss on these hedges is recorded promptly in earnings to offset the changes in the fair value of the assets or liabilities being hedged. Applied does not use derivative financial instruments for trading or speculative purposes.
 
Foreign Currency Translation As of October 28, 2007, primarily all of Applied’s subsidiaries use the United States dollar as their functional currency. Accordingly, assets and liabilities of these subsidiaries are translated using exchange rates in effect at the end of the period, except for non-monetary assets, such as inventories and property, plant and equipment, which are translated using historical exchange rates. Revenues and costs are translated using average exchange rates for the period, except for costs related to those balance sheet items that are translated using historical exchange rates. The resulting translation gains and losses are included in the Consolidated Statements of Operations as incurred.
 
Equity-Based Compensation
 
Applied has adopted stock plans that provide for grants to employees of equity-based awards, including stock options, restricted stock and restricted stock units (also referred to as performance shares under the Applied


50


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Materials, Inc. Employee Stock Incentive Plan). In addition, the Employee Stock Incentive Plan provides for the automatic grant of restricted stock units to non-employee directors and permits the grant of equity-based awards to Applied consultants. Applied also has two Employee Stock Purchase Plans (ESPP) for United States and international employees, respectively, which enable eligible employees to purchase Applied common stock.
 
On October 31, 2005, Applied implemented the provisions of Statement of Financial Accounting Standards No. 123(R), “Share-Based Payment” (SFAS 123(R)), using the modified prospective transition method. SFAS 123(R) requires companies to recognize the cost of employee services received in exchange for awards of equity instruments based upon the grant-date fair value of those awards. Using the modified prospective transition method of adopting SFAS 123(R), Applied began recognizing compensation expense for stock options and ESPP shares granted after October 30, 2005, plus equity-based awards granted prior to, and unvested as of October 31, 2005. As provided under this method of implementation, prior periods have not been restated. The estimated fair value of Applied’s equity-based awards, less expected forfeitures, is amortized over the awards’ service periods on a straight-line basis.
 
On November 10, 2005, the Financial Accounting Standards Board (FASB) issued FASB Staff position No. FAS 123(R)-3 “Transition Election Related to Accounting for Tax Effects of Share-Based Payment Awards.” Applied implemented the alternative transition method provided in the FASB Staff Position for calculating the tax effects of equity-based compensation pursuant to SFAS 123(R). The alternative transition method includes simplified methods to establish the beginning balance of the additional paid-in capital pool (APIC pool) related to the tax effects of employee equity-based compensation, and to determine the subsequent impact on the APIC pool and Consolidated Statement of Cash Flows of the tax effects of employee equity-based compensation awards that are outstanding upon the implementation of SFAS 123(R).
 
Prior to October 31, 2005, Applied measured compensation expense for its employee equity-based compensation plans using the intrinsic value method under APB 25 and related interpretations. As the exercise price of all options granted under these plans was not below the fair market price of the underlying common stock on the grant date, insignificant equity-based compensation cost for stock options was recognized in the Consolidated Statements of Operations under the intrinsic value method.
 
During fiscal 2006 and fiscal 2007, Applied recognized total equity-based compensation expense related to stock options, ESPP shares, restricted stock units and restricted stock of $216 million (or $0.11 per diluted share) and $161 million (of $0.08 per diluted share), respectively. During fiscal 2006 and 2007, Applied recognized income tax benefits related to equity-based compensation of $46 million and $45 million, respectively. The equity-based compensation expense related to restricted stock units and restricted stock for fiscal 2006 and fiscal 2007 was $30 million and $104 million, respectively.
 
Stock Options
 
The exercise price of each stock option equals the market price of Applied’s stock on the date of grant. Most options are scheduled to vest over four years and expire no later than seven years after the grant date. The fair value of each option grant is estimated on the date of grant using the Black-Scholes option pricing model. This model was developed for use in estimating the value of publicly traded options that have no vesting restrictions and are fully transferable. Applied’s employee stock options have characteristics significantly different from those of publicly traded options. The weighted average assumptions used in the model are outlined in the following table:
 
                 
Fiscal Year
  2006     2007  
 
Stock Options:
               
Dividend yield
    0.73 %     1.12 %
Expected volatility
    36.7 %     31.5 %
Risk-free interest rate
    4.48 %     4.66 %
Expected life (in years)
    3.8       3.9  


51


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
The computation of the expected volatility assumption used in the Black-Scholes calculations for new grants is based on a combination of historical and implied volatilities. When establishing the expected life assumption, Applied annually reviews historical employee exercise behavior of option grants with similar vesting periods.
 
Options outstanding had an aggregate intrinsic value of $165 million and $190 million at October 29, 2006 and October 28, 2007, respectively. The weighted average grant date fair value of options granted during fiscal 2006 and fiscal 2007 was $54 million and $2 million, respectively. The total intrinsic value of options exercised during fiscal 2006 and fiscal 2007 was $57 million and $141 million, respectively. The total fair value of options that vested during fiscal 2006 and fiscal 2007 was $256 million and $124 million, respectively. At October 29, 2006, Applied had $121 million of total unrecognized compensation expense, net of estimated forfeitures, related to stock option plans that will be recognized over the weighted average period of 1.1 years. At October 28, 2007, Applied had $48 million of total unrecognized compensation expense, net of estimated forfeitures, related to stock option plans that will be recognized over the weighted average period of 0.8 years. Cash received from stock option exercises was $284 million and $837 million, respectively, during fiscal 2006 and fiscal 2007. The actual tax benefit realized for the tax deductions from options exercised for fiscal 2006 and fiscal 2007 totaled $24 million and $50 million, respectively. During fiscal 2006, as part of the acquisition of Applied Films, Applied assumed outstanding options to purchase Applied Films common stock that, at the acquisition date, had a fair value of $26 million, including $6 million of total unrecognized compensation expense, net of $2 million of estimated forfeitures (see Note 12). The Applied Films stock options assumed by Applied were converted into options to purchase 3 million shares of Applied common stock.
 
Employee Stock Purchase Plans
 
Under the ESPP, substantially all employees may purchase Applied common stock through payroll deductions at a price equal to 85 percent of the lower of the fair market value at the beginning of the applicable offering period or at the end of each purchase period. The number of shares issued under the ESPP during fiscal 2006 and fiscal 2007 was 4,065,000 shares and 4,310,000 shares, respectively. Based on the Black-Scholes option pricing model, the weighted average estimated fair value of purchase rights under the ESPP was $5.21 per share for the year ended October 29, 2006 and $4.83 per share for the year ended October 28, 2007. Compensation expense is calculated using the fair value of the employee’s purchase rights per the Black-Scholes model. Underlying assumptions used in the model are outlined in the following table:
 
                 
Fiscal Year
  2006     2007  
 
ESPP:
               
Dividend yield
    0.32 %     1.18 %
Expected volatility
    31.1 %     28.5 %
Risk-free interest rate
    2.81 %     4.93 %
Expected life (in years)
    1.25       1.25  
 
Restricted Stock Units and Restricted Stock
 
Restricted stock units are converted into shares of Applied common stock upon vesting on a one-for-one basis. Typically, vesting of restricted stock units is subject to the employee’s continuing service to Applied. The compensation expense related to these awards was determined using the fair value of Applied’s common stock on the date of the grant, and compensation is recognized over the vesting period. Restricted stock units vest over a minimum of three years and typically vest over three to four years.
 
At October 29, 2006, Applied had $204 million total unrecognized compensation expense, net of estimated forfeitures, related to restricted stock unit grants, which will be recognized over the weighted average period of 1.7 years (see Note 8). At October 28, 2007, Applied had $271 million total unrecognized compensation expense, net of estimated forfeitures, related to restricted stock unit grants, which will be recognized over the weighted


52


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
average period of 1.5 years (see Note 8). During fiscal 2006, as part of the acquisition of Applied Films, Applied assumed Applied Films’ outstanding restricted stock units that, at the acquisition date, had a fair value of $298,000, including $130,000 of total unrecognized equity-based compensation expense, net of estimated forfeitures. The Applied Films restricted stock units assumed are expected to convert into 19,000 shares of Applied common stock upon vesting.
 
On January 25, 2007, the Human Resources and Compensation Committee (the Committee) of the Board of Directors approved new awards of 1,950,000 performance-based restricted stock units for Applied’s named executive officers and other key employees. The Committee also approved the issuance of 150,000 shares of restricted stock to Applied’s President and Chief Executive Officer at $0.01 per share. These awards will vest only if specific performance goals set by the Committee are achieved. The goals require the achievement of specified levels of Applied’s annual operating profit and also that the officer remain an employee of Applied through the vesting date. The fair value of the performance-based restricted stock units and restricted stock was estimated using the fair value of Applied common stock on the date of the grant and assumes that performance goals will be achieved. If such goals are not met, no compensation cost will be recognized and any recognized compensation cost will be reversed. The expected cost of the grant is being reflected over the vesting period, and is reduced for estimated forfeitures. Fiscal 2007 equity-based compensation expense included $13 million attributable to the performance-based awards granted on January 25, 2007.
 
Pro Forma Information under SFAS 123 for Fiscal 2005
 
Prior to fiscal 2006, Applied followed the disclosure-only provisions of Statement of Financial Accounting Standards No. 123, “Accounting for Stock-Based Compensation” (SFAS 123), as amended. The following table illustrates the effect on net income and earnings per share for fiscal 2005 if the fair value recognition provisions of SFAS 123, as amended, had been applied to options granted under Applied’s equity-based compensation plans. For purposes of this pro forma disclosure, the estimated value of the options is recognized over the options’ vesting periods. If Applied had recognized the expense of equity-based compensation programs in the Consolidated Statements of Operations, additional paid-in capital would have increased by a corresponding amount, net of applicable taxes.
 
         
Fiscal 2005
     
 
Reported net income
  $ 1,209,900  
Equity-based compensation expense, net of tax
    (312,116 )
         
Pro forma net income
  $ 897,784  
         
Earnings per share as reported:
       
Basic
  $ 0.74  
Diluted
  $ 0.73  
Pro forma earnings per share:
       
Basic
  $ 0.55  
Diluted
  $ 0.54  
 
For purposes of the weighted average estimated fair value calculations, the fair value of each stock option grant is estimated on the date of grant using the Black-Scholes option pricing model and the following assumptions:
 
                 
Fiscal 2005
  Stock Options     ESPP  
 
Dividend yield
    0.11 %     0.01 %
Expected volatility
    44 %     48 %
Risk-free interest rate
    3.45 %     2.51 %
Expected life (in years)
    4.0       1.25  


53


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Based on the Black-Scholes option pricing model, the weighted average estimated fair value of employee stock option grants was $6.46. The weighted average estimated fair value of purchase rights granted under the ESPP was $5.65. The computation of the expected volatility assumption used in the Black-Scholes calculations for new grants was based on a combination of historical and implied volatilities.
 
Defined Benefit Pension Plans of Foreign Subsidiaries
 
On October 28, 2007, Applied implemented the recognition and disclosure provisions of SFAS No. 158, “Employers’ Accounting for Defined Benefit Pension and Other Postretirement Plans — an amendment of FASB Statements 87, 88, 106 and 132(R)” (SFAS 158). SFAS 158 required Applied to recognize the funded status (the difference between the fair value of plan assets and the projected benefit obligations) of the defined benefit plan in the Consolidated Balance Sheet, with a corresponding adjustment to accumulated other comprehensive income, net of tax, to measure the fair value of plan benefit obligations as of its fiscal year ending October 28, 2007 and to provide additional disclosures. The implementation of SFAS 158 did not have a material impact on Applied’s financial statements. For additional information on Applied’s employee benefit plans, see Note 8.
 
Concentrations of Credit Risk Financial instruments that potentially subject Applied to significant concentrations of credit risk consist principally of cash equivalents, investments, trade accounts receivable and derivative financial instruments used in hedging activities. Applied invests in a variety of financial instruments, such as, but not limited to, certificates of deposit, corporate and municipal bonds, United States Treasury and agency securities, and mortgage-backed securities, and, by policy, limits the amount of credit exposure with any one financial institution or commercial issuer. Applied’s customers consist principally of semiconductor and LCD manufacturers located throughout the world. Applied performs ongoing credit evaluations of its customers’ financial condition and generally requires no collateral to secure accounts receivable. Applied maintains an allowance reserve for potentially uncollectible accounts receivable based on its assessment of the collectibility of accounts receivable. Applied regularly reviews the allowance by considering factors such as historical experience, credit quality, age of the accounts receivable balances, and current economic conditions that may affect a customer’s ability to pay. In addition, Applied utilizes letters of credit to mitigate credit risk when considered appropriate. Applied is exposed to credit-related losses in the event of nonperformance by counterparties to derivative financial instruments, but does not expect any counterparties to fail to meet their obligations.
 
Earnings Per Share Basic earnings per share is determined using the weighted average number of common shares outstanding during the period. Diluted earnings per share is determined using the weighted average number of common shares and potential common shares (representing the dilutive effect of stock options, restricted stock units, ESPP shares and amounts due under the agreements associated with the accelerated stock buyback program) outstanding during the period. Applied’s net income has not been adjusted for any period presented for purposes of computing basic or diluted earnings per share.
 
For purposes of computing diluted earnings per share, weighted average potential common shares do not include stock options with an exercise price that exceeded the average fair market value of Applied’s common stock for the period, as the effect would be anti-dilutive. Accordingly, options to purchase 124,306,000, 123,317,000 and 51,094,000 shares of common stock for the fiscal years ended October 30, 2005, October 29, 2006 and October 28, 2007, respectively, were excluded from the computation.
 
Recent Accounting Pronouncements
 
In February 2007, the Financial Accounting Standards Board (FASB) issued SFAS No. 159, “The Fair Value Option for Financial Assets and Financial Liabilities Including an Amendment of FASB Statement No. 115” (SFAS No. 159), which permits entities to elect to measure many financial instruments and certain other items at fair value that are not currently required to be measured at fair value. This election is irrevocable. SFAS No. 159 will be effective for Applied in fiscal 2009. Applied is evaluating the potential impact of the implementation of SFAS No. 159 on its financial position and results of operations.


54


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
In September 2006, the FASB issued Statement No. 157, “Fair Value” (SFAS 157). SFAS 157 defines fair value, establishes a framework for measuring fair value in accordance with generally accepted accounting principles, and expands disclosures about fair value measurements. SFAS 157 is effective for Applied in fiscal 2009. Applied is evaluating the potential impact of the implementation of SFAS 157 on its financial position and results of operations.
 
In July 2006, the FASB issued FASB Interpretation 48, “Accounting for Income Tax Uncertainties” (FIN 48). FIN 48 defines the threshold for recognizing the benefits of tax return positions in the financial statements as “more-likely-than-not” to be sustained by the taxing authority. The recently issued literature also provides guidance on the derecognition, measurement and classification of income tax uncertainties, along with any related interest and penalties. FIN 48 also includes guidance concerning accounting for income tax uncertainties in interim periods and increases the level of disclosures associated with any recorded income tax uncertainties. FIN 48 will become effective for Applied beginning in fiscal 2008. Any differences between the amounts recognized in the statements of financial position prior to the adoption of FIN 48 and the amounts reported after adoption will be accounted for as a cumulative-effect adjustment recorded to the beginning balance of retained earnings. Applied will continue to evaluate the application of FIN 48. Management does not believe the effect of implementing FIN 48 will have a material impact on its financial position or results of operations.
 
Note 2   Financial Instruments
 
Investments
 
Investments by security type at October 29, 2006 were as follows:
 
                                 
          Gross
    Gross
       
          Unrealized
    Unrealized
    Estimated
 
    Cost     Gains     Losses     Fair Value  
    (In thousands)  
 
Obligations of states and political subdivisions
  $ 1,153,750     $ 367     $ 2,913     $ 1,151,204  
U.S. commercial paper, corporate bonds and medium-term notes
    447,151       320       3,176       444,295  
U.S. Treasury and agency securities
    406,525       475       3,839       403,161  
Other debt securities
    299,003       557       4,139       295,421  
                                 
Total fixed income securities
    2,306,429       1,719       14,067       2,294,081  
Publicly traded equity securities
    15,710       3,259       951       18,018  
Equity securities carried at cost
    38,637                   38,637  
                                 
Total
  $ 2,360,776     $ 4,978     $ 15,018     $ 2,350,736  
                                 


55


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Investments by security type at October 28, 2007 were as follows:
 
                                 
          Gross
    Gross
       
          Unrealized
    Unrealized
    Estimated
 
    Cost     Gains     Losses     Fair Value  
    (In thousands)  
 
Obligations of states and political subdivisions
  $ 1,083,637     $ 1,817     $ 333     $ 1,085,121  
U.S. Treasury and agency securities
    517,805       3,616       308       521,113  
U.S. commercial paper, corporate bonds and medium-term notes
    490,066       1,219       1,680       489,605  
Other debt securities
    341,650       1,683       1,898       341,435  
Bank certificate of deposit
    2,000                   2,000  
                                 
Total fixed income securities
    2,435,158       8,335       4,219       2,439,274  
Publicly traded equity securities
    27,651       25,846       3,730       49,767  
Equity securities carried at cost
    40,241                   40,241  
                                 
Total
  $ 2,503,050     $ 34,181     $ 7,949     $ 2,529,282  
                                 
 
Cash and cash equivalents included investments in debt and other securities of $75 million at October 29, 2006 and $159 million at October 28, 2007.
 
Contractual maturities of investments at October 28, 2007 were as follows:
 
                 
          Estimated
 
    Cost     Fair Value  
    (In thousands)  
 
Due in one year or less
  $ 524,700     $ 524,867  
Due after one through three years
    621,939       623,345  
Due after three years
    930,627       933,425  
No single maturity date*
    425,784       447,645  
                 
    $ 2,503,050     $ 2,529,282  
                 
 
 
* Securities with no single maturity date include publicly traded equity securities, mortgage- and asset-backed securities.
 
Applied regularly reviews its investment portfolio to identify and evaluate investments that have indications of possible impairment. Factors considered in determining whether a loss is temporary include: the length of time and extent to which fair market value has been lower than the cost basis, the financial condition and near-term prospects of the investee, credit quality, and Applied’s ability to hold the investment for a period of time sufficient to allow for any anticipated recovery in fair market value. Generally, the contractual terms of the investments do not permit settlement at prices less than the amortized cost of the investments. Applied has determined that the gross unrealized losses on its investments at October 28, 2007 are temporary in nature. The gross unrealized losses related to investments are primarily due to a decrease in the fair market value of fixed-rate debt securities as a result of increases in interest rates. Accordingly, Applied does not consider the investments to be other-than-temporarily impaired at October 28, 2007, as it has the ability and intent to hold the investments for a period of time that may be sufficient for an anticipated recovery in fair market value.
 
The following table provides the gross unrealized losses and the fair market value of Applied’s investments with unrealized losses that are not deemed to be other-than-temporarily impaired, aggregated by investment


56


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
category and length of time that individual securities have been in a continuous unrealized loss position as of October 28, 2007.
 
                                                 
    In Loss Position for
    In Loss Position for
       
    Less Than 12 Months     12 Months or Greater     Total  
          Gross
          Gross
          Gross
 
          Unrealized
          Unrealized
          Unrealized
 
    Fair Value     Losses     Fair Value     Losses     Fair Value     Losses  
    (In thousands)  
 
Obligations of states and political subdivisions
  $ 31,962     $ 9     $ 161,419     $ 325     $ 193,381     $ 334  
U.S. commercial paper, corporate bonds and medium-term notes
    119,805       725       113,132       954       232,937       1,679  
U.S. Treasury and agency securities
                81,063       308       81,063       308  
Other debt securities
    37,190       273       98,583       1,626       135,773       1,899  
Publicly traded equity securities
    10,346       3,730                   10,346       3,730  
                                                 
    $ 199,303     $ 4,737     $ 454,197     $ 3,213     $ 653,500     $ 7,950  
                                                 
 
Applied manages its cash equivalents and investments as a single portfolio of highly marketable securities that is intended to be available to meet Applied’s current cash requirements. For fiscal 2005, gross realized gains on sales of investments were $3 million, and gross realized losses were $8 million. For fiscal 2006, gross realized gains on sales of investments were $5 million, and gross realized losses were $28 million, principally attributable to the sale of investments to fund the accelerated stock buyback program discussed in Note 7. For fiscal 2007, gross realized gains on sales of investments were $2 million, and gross realized losses were $2 million.
 
Derivative Financial Instruments Derivative instruments and hedging activities, including foreign currency exchange contracts, are recognized on the balance sheet at fair value. Changes in the fair value of derivatives that do not qualify for hedge treatment, as well as the ineffective portion of any hedges, are recognized currently in earnings. All of Applied’s derivative financial instruments are recorded at their fair value in other current assets or accounts payable and accrued expenses.
 
Applied conducts business in a number of foreign countries, with certain transactions denominated in local currencies, such as Japanese yen, euro, Israeli shekel and Swiss francs. The purpose of Applied’s foreign currency management is to mitigate the effect of exchange rate fluctuations on certain foreign currency denominated revenues, costs and eventual cash flows. The terms of currency instruments used for hedging purposes are generally consistent with the timing of the transactions being hedged.
 
Applied uses derivative financial instruments, such as forward exchange contracts and currency option contracts, to hedge certain forecasted foreign currency denominated transactions expected to occur typically within the next 12 months. Hedges related to anticipated transactions are designated and documented at the inception of the hedge as cash flow hedges and are evaluated for effectiveness quarterly. The effective portion of the gain or loss on these hedges is reported as a component of accumulated other comprehensive income/(loss) in stockholders’ equity and is reclassified into earnings when the hedged transaction affects earnings. Amounts included in accumulated other comprehensive income/(loss) at October 28, 2007 will generally be reclassified into earnings within 12 months. Changes in the fair value of currency forward exchange and option contracts due to changes in time value are excluded from the assessment of effectiveness and are recognized in cost of products sold and general and administrative expenses. The change in option and forward time value was not material for fiscal 2005, 2006 or 2007. If the transaction being hedged fails to occur, or if a portion of any derivative is ineffective, Applied promptly recognizes the gain or loss on the associated financial instrument in general and administrative expenses. The amounts recognized due to anticipated transactions failing to occur were not material for all periods presented.


57


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Forward exchange contracts are generally used to hedge certain foreign currency denominated assets or liabilities. These derivatives are not designated for hedge accounting treatment. Accordingly, changes in the fair value of these hedges are recorded promptly in earnings to offset the changes in the fair value of the assets or liabilities being hedged.
 
Derivative-related activity in accumulated other comprehensive income/(loss), net of taxes, was as follows:
 
                 
    2006     2007  
    (In thousands)  
 
Unrealized gain on derivative instruments at beginning of period
  $ 9,207     $ 4,318  
Decrease in fair value of derivative instruments
    (5,095 )     (6,012 )
Losses reclassified into earnings, net
    206       285  
                 
Unrealized gain/(loss), net, on derivative instruments at end of period
  $ 4,318     $ (1,409 )
                 
 
Fair Value of Financial Instruments The carrying amounts of Applied’s financial instruments, including cash and cash equivalents, accounts receivable, notes payable, and accounts payable and accrued expenses, approximate fair value due to the short maturities of these financial instruments. At October 29, 2006, the carrying amount of long-term debt was $407 million and the estimated fair value was $428 million. At October 28, 2007, the carrying amount of long-term debt was $205 million and the estimated fair value was $226 million. The estimated fair value of long-term debt is based primarily on quoted market prices for the same or similar issues.


58


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Note 3   Balance Sheet Detail
 
                 
    2006     2007  
    (In thousands)  
 
Inventories
               
Customer service spares
  $ 466,414     $ 500,173  
Raw materials
    236,913       201,055  
Work-in-process
    272,654       230,244  
Finished goods*
    430,796       381,765  
                 
    $ 1,406,777     $ 1,313,237  
                 
Property, Plant and Equipment, Net
               
Land and improvements
  $ 222,381     $ 218,181  
Buildings and improvements
    1,241,195       1,253,322  
Demonstration and manufacturing equipment
    659,551       639,640  
Furniture, fixtures and other equipment
    553,185       563,373  
Construction in progress
    77,571       107,688  
                 
Gross property, plant and equipment
    2,753,883       2,782,204  
Accumulated depreciation
    (1,729,589 )     (1,730,962 )
                 
    $ 1,024,294     $ 1,051,242  
                 
Accounts Payable and Accrued Expenses
               
Accounts payable
  $ 475,479     $ 455,894  
Compensation and employee benefits
    439,333       491,411  
Deferred revenue
    369,875       445,475  
Installation and warranty
    215,578       187,149  
Customer deposits
    97,495       154,737  
Other accrued taxes
    84,957       67,962  
Dividends payable
    69,600       83,142  
Restructuring reserve
    24,731       23,193  
Other
    246,603       304,350  
                 
    $ 2,023,651     $ 2,213,313  
                 
 
 
* Included in finished goods inventory is $174 million at October 29, 2006 and $168 million at October 28, 2007 of newly introduced systems at customer locations where the sales transaction did not meet Applied’s revenue recognition criteria, as set forth in Note 1.


59


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
 
Goodwill, Purchased Technology and Other Intangible Assets
 
Details of unamortized intangible assets were as follows:
 
                                                 
    2006     2007  
          Other
                Other
       
          Intangible
                Intangible
       
    Goodwill     Assets     Total     Goodwill     Assets     Total  
    (In thousands)  
 
Gross carrying amount
  $ 618,428     $ 17,860     $ 636,288     $ 1,046,046     $ 17,860     $ 1,063,906  
Accumulated amortization
    (45,870 )           (45,870 )     (45,870 )           (45,870 )
                                                 
    $ 572,558     $ 17,860     $ 590,418     $ 1,000,176     $ 17,860     $ 1,018,036  
                                                 
 
Goodwill and unamortized intangible assets are not amortized but are subject to annual reviews for impairment, which Applied performs during the fourth quarter of each fiscal year. Applied conducted these impairment tests in fiscal 2006 and fiscal 2007, and the results of these tests indicated that Applied’s goodwill and unamortized intangible assets were not impaired. Goodwill and unamortized intangible assets are also subject to review for impairment when circumstances or events occur during the year that indicate that the assets may be impaired. From October 29, 2006 to October 28, 2007, the change in goodwill was $428 million, primarily due to the acquisitions of HCT Shaping Systems SA (HCT) and Brooks Software (see Note 12). Other assets that are not subject to amortization consist primarily of a trade name associated with the Metron Technology N.V. acquisition and is reported in the Fab Solutions segment. As of October 28, 2007 goodwill and unamortized intangible assets by reportable segment was: Adjacent Technologies, $484 million; Silicon, $224 million; Fab Solutions, $194 million and Display, $116 million.
 
Details of amortized intangible assets were as follows:
 
                                                 
    2006     2007  
          Other
                Other
       
    Purchased
    Intangible
          Purchased
    Intangible
       
    Technology     Assets     Total     Technology     Assets     Total  
    (In thousands)  
 
Gross carrying amount
  $ 469,226     $ 75,617     $ 544,843     $ 518,042     $ 224,253     $ 742,295  
Accumulated amortization
    (327,335 )     (34,302 )     (361,637 )     (340,527 )     (46,450 )     (386,977 )
                                                 
    $ 141,891     $ 41,315     $ 183,206     $ 177,515     $ 177,803     $ 355,318  
                                                 
 
Purchased technology and other intangible assets are amortized over their estimated useful lives of 1 to 15 years using the straight-line method. From October 29, 2006 to October 28, 2007, the change in gross carrying amount of the amortized intangible assets was approximately $197 million, primarily due to the acquisitions of HCT and Brooks Software (see Note 12). Aggregate amortization expense was $31 million and $57 million for fiscal 2006 and 2007, respectively. As of October 28, 2007, future estimated amortization expense is expected to be $92 million for fiscal 2008, $45 million for fiscal 2009, $44 million for fiscal 2010, $41 million for fiscal 2011, $40 million for fiscal 2012, and $93 million thereafter. As of October 28, 2007, amortized intangible assets by reportable segment were: Adjacent Technologies, $245 million; Fab Solutions, $58 million; Display, $50 million; and Silicon, $2 million.
 
Note 4   Borrowing Facilities
 
At October 28, 2007, Applied had credit facilities for unsecured borrowings in various currencies of up to $1.2 billion, of which $1.0 billion is comprised of a 5-year revolving credit agreement with a group of banks that is scheduled to expire in January 2012. This agreement provides for borrowings in United States dollars at interest rates keyed to one of the two rates selected by Applied for each advance, and includes financial and other covenants with which Applied was in compliance at October 28, 2007. No amounts were outstanding under this agreement at


60


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
October 28, 2007. Of the remaining credit facilities, $167 million are with Japanese banks at rates indexed to their prime reference rate denominated in Japanese yen. No amounts were outstanding under these credit facilities at October 28, 2007.
 
Note 5   Long-Term Debt
 
Long-term debt outstanding at the end of the fiscal year was as follows:
 
                 
Fiscal Year
  2006     2007  
    (In thousands)  
 
1.61% installment note payable to Tokyo Electron Ltd., face amount $1,800, maturing 2008, interest payable March 17, June 17, September 17 and December 17
  $ 3,310     $ 1,649  
Japanese debt, 3.00%, maturing 2008 – 2011
    3,933       3,193  
6.75% unsecured senior notes which matured in 2007, interest payable April 15 and October 15
    200,000        
7.125% unsecured senior notes due 2017, interest payable April 15 and October 15
    200,000       200,000  
                 
      407,243       204,842  
Current portion
    (202,535 )     (2,561 )
                 
    $ 204,708     $ 202,281  
                 
 
Applied has debt agreements that contain financial and other covenants. These covenants require Applied to maintain certain minimum financial ratios. At October 28, 2007, Applied was in compliance with all covenants.
 
Aggregate debt maturities at October 28, 2007 were: $3 million in fiscal 2008, $913,000 in fiscal 2009, $912,000 in fiscal 2010, $456,000 in fiscal 2011 and $200 million thereafter.
 
Note 6   Restructuring and Asset Impairments
 
During fiscal 2007, Applied recognized restructuring and asset impairment charges of $26 million, including $18 million in restructuring charges and $8 million in asset impairments. Fiscal 2007 restructuring and asset impairment charges included $30 million associated with the decision to cease development of beamline implant products, offset by $3 million in adjustments associated with subsequent sales of properties held for sale. During fiscal 2006, Applied recognized restructuring and asset impairment charges of $212 million, including $128 million in asset impairments and $92 million in restructuring charges primarily associated with the closure of its Hayward, California facility, offset by $8 million in adjustments associated with realignment programs of prior years.
 
On February 9, 2007, the Board of Directors of Applied approved a plan (the Plan) to cease development of beamline implant products for semiconductor manufacturing and curtail the operations of its Implant group based in Horsham, England. Under the Plan, Applied closed its research and development and manufacturing operations in Horsham in October 2007. The total cost of implementing the Plan is expected to be in the range of $95 million to $110 million, and is reported in the Consolidated Statements of Operations under cost of products sold and operating expenses (including restructuring and asset impairment charges). The majority of the cash outlays in connection with the Plan occurred in fiscal 2007. The Implant group operated in the Silicon segment and the results of its operations were not material to the segment’s financial position or results of operations.
 
Costs under the Plan in fiscal 2007 consisted primarily of inventory-related charges reported as cost of products sold of $56 million, other operating expenses of $10 million, and restructuring and asset impairment charges of $30 million. Applied recorded restructuring charges of $22 million, consisting primarily of employee termination costs to reduce its workforce by approximately 215 positions. The majority of the affected employees were based in Horsham, England, and represented multiple functions. Asset impairment charges included $8 million of fixed asset write-offs.


61


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Changes in restructuring reserves related to the Plan for fiscal 2007 were as follows:
 
                         
    Severance     Facilities     Total  
    (In thousands)  
 
Provision for restructuring reserves
  $ 19,992     $ 1,105     $ 21,097  
Consumption of reserves
    (10,902 )     (285 )     (11,187 )
Foreign currency changes
    649       2       651  
                         
Balance, October 28, 2007
  $ 9,739     $ 822     $ 10,561  
                         
 
During the first quarter of fiscal 2006, Applied’s Board of Directors approved a plan to disinvest a portion of Applied’s real estate and facilities portfolio (the Disinvestment Plan). Properties with an estimated fair value of $56 million were reported as assets held-for-sale and reclassified from property, plant and equipment on the Consolidated Balance Sheet. During fiscal 2006, Applied recorded an asset impairment charge of $124 million to write down the following properties to estimated fair value: (1) facilities in Narita, Japan, Chunan, Korea, Hillsboro, Oregon, and Danvers, Massachusetts; and (2) 26 acres of unimproved land in Hillsboro, Oregon. During fiscal 2006, Applied sold the Danvers facility for net proceeds of $16 million and recognized a gain of $4 million. During fiscal 2007, Applied sold the Hillsboro, Chunan, and Narita facilities and the Hillsboro land for total net proceeds of $38 million and recognized a gain of $3 million.
 
During fiscal 2006 as part of the Disinvestment Plan, Applied recorded lease termination charges in the amount of $89 million, related to the closure of its leased Hayward, California facility.
 
There were no restructuring, asset impairments or other charges for fiscal 2005.
 
Changes in restructuring reserves for facilities realignment programs for fiscal 2005, 2006 and 2007 were as follows:
 
                         
    Facilities     Other     Total  
 
Balance, October 31, 2004
    98,005       2,106       100,111  
Consumption of reserves
    (28,523 )     (2,106 )     (30,629 )
                         
Balance, October 30, 2005
    69,482             69,482  
Provision for fiscal 2006
    95,829             95,829  
Consumption of reserves
    (128,490 )           (128,490 )
Adjustment of restructuring reserves
    (12,090 )           (12,090 )
                         
Balance, October 29, 2006
    24,731             24,731  
                         
Consumption of reserves
    (8,368 )           (8,368 )
Adjustment of restructuring reserves
    (3,732 )           (3,732 )
Foreign currency changes
    1             1  
                         
Balance, October 28, 2007
  $ 12,632     $     $ 12,632  
                         


62


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Note 7   Stockholders’ Equity
 
Accumulated Other Comprehensive Income/(Loss) See the Consolidated Statements of Stockholders’ Equity for the components of comprehensive income. Accumulated other comprehensive income/(loss), net of taxes, consisted of the following components:
 
                 
Fiscal Year
  2006     2007  
    (In thousands)  
 
Unrealized gain (loss) on investments
  $ (5,132 )   $ 16,755  
Unrealized gain (loss) on derivative instruments qualifying as cash flow hedges
    4,319       (1,409 )
Pension liability
    (17,985 )     (12,232 )
Retiree medical benefits
          (1,132 )
Cumulative translation adjustments
    (212 )     9,371  
                 
    $ (19,010 )   $ 11,353  
                 
 
Stock Repurchase Program Since March 1996, Applied has systematically repurchased shares of its common stock in the open market. In March 2006, the Board of Directors approved a stock repurchase program for up to $5.0 billion in repurchases over the next three years ending in March 2009. Pursuant to this authorization, on September 18, 2006, Applied entered into accelerated stock buyback agreements with Goldman, Sachs & Co. (Goldman Sachs), under which Applied agreed to purchase from Goldman Sachs outstanding shares of Applied common stock for an initial purchase price of $2.5 billion. Under the agreements, Applied purchased 145 million shares of its common stock on September 18, 2006 at a price per share of $17.20, and Goldman Sachs agreed to purchase an equivalent number of shares in the open market over the following four months. At the end of the four month period, Applied was entitled or subject to a price adjustment based upon the volume weighted average price of Applied common stock during the purchase period. On January 24, 2007, Applied settled the price adjustment of $132 million by payment in cash to Goldman Sachs, resulting in an adjusted price per share of $18.08. The repurchase was funded with Applied’s existing cash and investments and reported as treasury stock.
 
On September 15, 2006, the Board of Directors approved a new stock repurchase program for up to $5.0 billion in repurchases over the next three years ending in September 2009, of which authorization for $3.8 billion of repurchases remained as of October 28, 2007. Under this authorization, Applied is continuing a systematic stock repurchase program and also may make supplemental stock repurchases from time to time, depending on market conditions, stock price and other factors. In fiscal 2006, there were 238,397,000 shares repurchased at an average price of $17.35 per share. In fiscal 2007, there were 60,561,000 shares repurchased at an average price of $19.81 per share.
 
Dividends Applied’s Board of Directors declared three quarterly cash dividends in the amount of $0.03 per share each in fiscal 2005. During fiscal 2006, Applied’s Board of Directors declared one quarterly cash dividend in the amount of $0.03 per share and three quarterly cash dividends in the amount of $0.05 per share each. During fiscal 2007, Applied’s Board of Directors declared one quarterly cash dividend in the amount of $0.05 per share and three quarterly cash dividends in the amount of $0.06 per share each. The fourth quarterly cash dividend declared in fiscal 2007 was paid on December 6, 2007 to stockholders of record as of November 15, 2007. Dividends paid during fiscal 2005, 2006 and fiscal 2007 amounted to $98 million, $251 million and $306 million, respectively. The declaration of any future cash dividend is at the discretion of the Board of Directors and will depend on Applied’s financial condition, results of operations, capital requirements, business conditions and other factors, as well as a determination that cash dividends are in the best interest of Applieds’ stockholders.


63


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Note 8   Employee Benefit Plans
 
Stock Options Applied grants options to employees and non-employee directors to purchase shares of its common stock, at future dates, at the fair market value on the date of grant. Most options are scheduled to vest over four years, and expire no later than seven years from the grant date. There were 138,377,000 shares available for grant at October 30, 2005, 144,582,000 shares available for grant at October 29, 2006, and 156,322,624 shares available for grant at October 28, 2007. Stock option activity was as follows:
 
                                                 
    2005     2006     2007  
          Weighted
          Weighted
          Weighted
 
          Average
          Average
          Average
 
          Exercise
          Exercise
          Exercise
 
    Shares     Price     Shares     Price     Shares     Price  
    (In thousands, except per share amounts)  
 
Outstanding, beginning of year
    227,588     $ 17.93       200,007     $ 18.67       163,214     $ 18.83  
Granted and assumed
    24,186     $ 16.97       12,174     $ 16.92       311     $ 17.98  
Exercised
    (22,759 )   $ 8.49       (18,498 )   $ 15.34       (46,885 )   $ 17.86  
Canceled
    (29,008 )   $ 19.48       (30,469 )   $ 19.14       (21,739 )   $ 25.29  
                                                 
Outstanding, end of year
    200,007     $ 18.67       163,214     $ 18.83       94,901     $ 17.81  
                                                 
Exercisable, end of year
    135,714     $ 20.21       130,065     $ 19.59       83,178     $ 17.84  
 
The following table summarizes information with respect to options outstanding and exercisable at October 28, 2007:
 
                                                         
    Options Outstanding     Options Exercisable  
                Weighted
                         
          Weighted
    Average
                Weighted
       
          Average
    Remaining
    Aggregate
          Average
    Aggregate
 
Range of
  Number of
    Exercise
    Contractual
    Intrinsic
    Number of
    Exercise
    Intrinsic
 
Exercise Prices
  Shares     Price     Life     Value     Shares     Price     Value  
    (In thousands)           (In years)     (In thousands)     (In thousands)           (In thousands)  
 
$0.01 — $4.99
    44     $ 3.09       1.30     $ 696       44     $ 3.09     $ 696  
$5.00 — $9.99
    98     $ 6.58       4.11       1,199       98     $ 6.58       1,199  
$10.00 — $19.99
    68,568     $ 16.23       2.84       187,820       57,797     $ 16.06       168,588  
$20.00 — $29.99
    26,182     $ 22.01       2.44             25,230     $ 21.98        
$30.00 — $59.99
    9     $ 41.32       2.25             9     $ 41.32        
                                                         
      94,901     $ 17.81       2.73     $ 189,715       83,178     $ 17.84     $ 170,483  
                                                         
Options exercisable and expected to become exercisable
    93,961     $ 17.80       2.7     $ 188,634                          
 
Restricted Stock Units Applied grants restricted stock units (referred to as performance shares under the Applied Materials, Inc. Employee Stock Incentive Plan). Restricted stock units generally vest over one to four years, subject to continued service to Applied on each vesting date.


64


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
A summary of the changes in restricted stock units outstanding under Applied’s equity compensation plans during fiscal 2007 is presented below:
 
                                 
          Weighted
    Weighted
       
          Average
    Average
    Aggregate
 
          Grant Date
    Remaining
    Intrinsic
 
    Shares     Fair Value     Contractual Term     Value  
    (In thousands, except per share amounts)  
 
Non-vested restricted stock units at October 29, 2006
    14,117     $ 17.67       3.7 Years     $ 243,653  
Granted
    10,691       19.18                  
Vested
    (4,512 )     17.80                  
Canceled
    (1,699 )     17.73                  
                                 
Non-vested restricted stock units at October 28, 2007
    18,597       18.51       2.9     $ 350,746  
                                 
Non-vested restricted stock units expected to vest
    16,186       18.46       3.2     $ 305,262  
 
Employees Stock Purchase Plan Applied sponsors two Employee Stock Purchase Plans (collectively, ESPP) for the benefit of United States (U.S.) and international employees, respectively. The U.S. plan is qualified under Section 423 of the Internal Revenue Code. Under the ESPP, substantially all employees may purchase Applied common stock through payroll deductions at a price equal to 85 percent of the lower of the fair market value of the stock at the beginning of the offering period or at the end of each applicable purchase period. The ESPP provides for consecutive and overlapping offering periods of up to 24 months in duration, with each offering period composed of four consecutive six-month purchase periods. ESPP contributions are limited to a maximum of 10 percent of an employee’s eligible compensation, up to a maximum of $6,500 per six-month purchase period. ESPP participants are also limited to purchasing a maximum of 1,000 shares per purchase period. Shares issued under the ESPP were 4,879,000 for fiscal 2005, 4,065,000 for fiscal 2006, and 4,310,000 for fiscal 2007. At October 28, 2007, there were 76,359,252 shares available for future issuance under the ESPP.
 
Employee Bonus Plans Applied has various employee bonus plans. A profit-sharing plan provides for the distribution of a percentage of pre-tax profits to substantially all Applied employees who are not eligible for other performance-based incentive plans, up to a maximum percentage of eligible compensation. Other plans award annual bonuses to Applied’s executives and other key contributors based on the achievement of profitability and/or other specified performance criteria. Applied also has agreements with key technical employees that provide for additional compensation related to the success of new product development and achievement of specified profitability criteria. Charges to expense under these plans were $138 million for fiscal 2005, $262 million for fiscal 2006 and $271 million for fiscal 2007.
 
Employee Savings and Retirement Plan Applied’s Employee Savings and Retirement Plan (401(k) Plan) is qualified under Sections 401(a) and (k) of the Internal Revenue Code. Eligible employees may make salary deferral and catch-up contributions under the 401(k) Plan on a pre-tax basis. Applied matches a percentage of each participant’s salary deferral contributions with cash contributions. In general, these matching contributions become 20 percent vested at the end of an employee’s second year of service with Applied, and vest 20 percent per year of service thereafter, becoming fully vested at the end of six years of service. Participants may direct that funds held in their 401(k) Plan accounts, including any Applied matching contributions, be invested in any of the diversified investment funds available under the 401(k) Plan or in the Applied Materials, Inc. Common Stock Fund (Stock Fund), which invests solely in shares of Applied common stock. Effective June 21, 2007, the Stock Fund was converted into a non-leveraged employee stock ownership plan (within the meaning of Section 4975(e)(7) of the Internal Revenue Code) and, as a result, participants have the option of specifying that any future cash dividends paid on shares held in the Stock Fund be either reinvested in the Stock Fund or distributed directly to them in cash no later than 90 days after the calendar year for which the dividends were paid. Applied’s matching contributions under this plan were approximately $25 million, net of $1 million in forfeitures, for fiscal 2005, $27 million, net of $2 million in forfeitures, for fiscal 2006 and $28 million, net of $1 million in forfeitures, for fiscal 2007.


65


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Defined Benefit Pension Plans of Foreign Subsidiaries Several of Applied’s foreign subsidiaries have defined benefit pension plans covering substantially all of their eligible employees. Benefits under these plans are typically based on years of service and final average compensation levels. Applied uses August 31 as a measurement date. The plans are managed in accordance with applicable local statutes and practices. Applied deposits funds for certain of these plans with insurance companies, pension trustees, government-managed accounts, and/or accrues the expense for the unfunded portion of the benefit obligation on its consolidated financial statements. Applied’s practice is to fund the various pension plans in amounts sufficient to meet the minimum requirements as established by applicable local governmental oversight and taxing authorities. Depending on the design of the plan, local custom and market circumstances, the liabilities of a plan may exceed qualified plan assets. The differences between the aggregate accumulated benefit obligations and aggregate plan assets of these plans have been recorded as liabilities by Applied and are included in accrued expenses and other liabilities in the Consolidated Balance Sheets.
 
On October 28, 2007, Applied implemented the recognition and disclosure provisions of SFAS No. 158, “Employers’ Accounting for Defined Benefit Pension and Other Postretirement Plans — an amendment of FASB Statements 87, 88, 106 and 132(R)” (SFAS 158). SFAS 158 required Applied to recognize the funded status (the difference between the fair value of plan assets and the projected benefit obligations) of the defined benefit plan in the Consolidated Balance Sheet, with a corresponding adjustment to accumulated other comprehensive income, net of tax, to measure the fair value of plan benefit obligations as of its fiscal year ending October 28, 2007 and to provide additional disclosures.
 
Upon implementation, SFAS 158 requires an adjustment to accumulated other comprehensive income for the net unrecognized actuarial losses, unrecognized prior service costs and unrecognized transition obligations remaining from the initial adoption of SFAS No. 87, “Employers’ Accounting for Pensions” (SFAS 87), all of which were previously netted against the plan’s funded status in the Consolidated Balance Sheet. These amounts will be subsequently recognized as net periodic pension cost in accordance with SFAS 87. The implementation of SFAS 158 had no effect on Applied’s Consolidated Statement of Operations for the year ended October 28, 2007, or for any prior period presented, and it is not expected to affect Applied’s operating results in future periods.
 
The incremental effect of applying SFAS 158 on the Consolidated Balance Sheet at October 28, 2007 is presented in the following table:
 
                         
                After
 
    Before
    SFAS No.
    Adoption
 
    Adoption of
    158
    of SFAS
 
    SFAS 158     Adjustment     No. 158  
    (In thousands)  
 
Deferred income taxes
  $ 487,444     $ (959 )   $ 486,485  
                         
Liability for pension benefits
  $ 131,853     $ (3,250 )   $ 128,603  
                         
Total liabilities
  $ 2,835,916     $ (3,250 )   $ 2,832,666  
                         
Accumulated other comprehensive income
  $ 9,062     $ 2,291     $ 11,353  
                         
Total shareholders’ equity
  $ 7,819,118     $ 2,291     $ 7,821,409  
                         
 
Included in accumulated other comprehensive income at October 28, 2007 are the following amounts that have not yet been recognized in net periodic pension cost: unrecognized transition obligation of $343,000 ($240,000 net of tax), unrecognized prior service costs of $2.4 million ($1.6 million net of tax) and unrecognized actuarial losses of $19.5 million ($13.6 million net of tax). The transition obligation, prior service cost, and actuarial loss expected to be recognized in net periodic pension cost during the fiscal year-ended October 28, 2008 are $80,000 ($51,000 net of tax), $230,000 ($197,000 net of tax), and $585,000 ($374,000 net of tax), respectively.


66


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
A summary of the changes in benefit obligations and plan assets for fiscal 2006 and 2007 is presented below.
 
                 
    2006     2007  
    (In thousands, except percentages)  
 
Change in projected benefit obligation
               
Beginning projected benefit obligation
  $ 186,435     $ 224,321  
Service cost
    15,429       15,768  
Interest cost
    8,938       10,776  
Plan participants’ contributions
    1,176       1,331  
Actuarial loss
    (12,113 )     (20,198 )
Curtailments, settlements and special termination benefits
    (5,446 )     (5,970 )
Foreign currency exchange rate changes
    9,332       20,361  
Benefits paid
    (7,763 )     (8,981 )
Plan amendments and business combinations
    28,844       10,421  
Transfers out
    (511 )      
                 
Ending projected benefit obligation
  $ 224,321     $ 247,829  
                 
Ending accumulated benefit obligation
  $ 185,449     $ 214,073  
                 
Range of assumptions to determine benefit obligations
               
Discount rate
    2.3% - 5.8%       2.3% - 6.3%  
Rate of compensation increase
    2.0% - 6.0%       2.0% - 6.0%  
Change in plan assets
               
Beginning fair value of plan assets
  $ 64,151     $ 92,422  
Return on plan assets
    6,790       6,276  
Employer contributions
    23,354       11,424  
Plan participants’ contributions
    1,176       1,331  
Foreign currency exchange rate changes
    4,714       8,846  
Divestitures, settlements and business combinations
          6,741  
Benefits paid
    (7,763 )     (8,981 )
                 
Ending fair value of plan assets
  $ 92,422     $ 118,059  
                 
Funded status
  $ (131,899 )   $ (129,766 )
Unrecognized transition obligations
    372        
Unrecognized prior service costs
    (1,827 )      
Unrecognized net actuarial loss
    48,197        
Employer contributions after the measurement date
    1,330       1,163  
                 
Net amount recognized
  $ (83,827 )   $ (128,603 )
                 
Amounts recognized in the consolidated balance sheets
               
Prepaid benefit cost
  $     $  
Accrued benefit cost
    (112,807 )      
Intangible asset
    1,403        
Accumulated other comprehensive loss
    27,577        
                 
Net amount recognized
  $ (83,827 )   $  
                 
Amounts recognized in the consolidated balance sheets
               
Noncurrent asset
  $     $ 897  
Current liability
          (1,973 )
Noncurrent liability
          (127,527 )
                 
Total
  $     $ (128,603 )
                 
Amounts recognized in accumulated other comprehensive income
               
Noncurrent asset
  $     $ 19,521  
Current liability
          (2,354 )
Noncurrent liability
          343  
                 
Total
  $     $ 17,510  
                 
Plans with projected benefit obligations in excess of plan assets
               
Projected benefit obligation
  $ 224,321     $ 239,297  
Fair value of plan assets
  $ 92,422       108,794  
Plans with accumulated benefit obligations in excess of plan assets
               
Accumulated benefit obligation
  $ 181,787     $ 209,090  
Fair value of plan assets
  $ 86,010     $ 108,794  
 


67


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
                 
    2006     2007  
 
Plan assets — allocation
               
Equity securities
    58 %     60 %
Debt securities
    37 %     34 %
Cash
    5 %     4 %
Real Estate
          1 %
Other
          1 %
 
On February 9, 2007, the Board of Directors of Applied approved a plan to cease development of beamline implant products for semiconductor manufacturing and curtail the operations of its Implant group based in Horsham, England (see Note 6). A reduction in force led to a curtailment loss of $629,000, which is included in restructuring and asset impairment expenses on the Consolidated Statement of Operations.
 
Applied’s investment strategy for its defined benefit plans is to invest assets in a prudent manner, maintaining well-diversified portfolios with the long-term objective of meeting the obligations of the plans as they come due. Asset allocation decisions are typically made by plan fiduciaries with input from Applied’s pension committee. Applied’s asset allocation strategy incorporates a sufficient equity exposure in order for the plans to benefit from the expected long-term outperformance of equities relative to the plans’ liabilities. Applied retains investment managers, where appropriate, to manage the assets of the plans. Performance of investment managers is monitored by plan fiduciaries with the assistance of local investment consultants. The investment managers make investment decisions within the guidelines set forth by plan fiduciaries. Risk management practices include diversification across asset classes and investment styles, and periodic rebalancing toward target asset allocation ranges. Investment managers may use derivative instruments for efficient portfolio management purposes. Plan assets do not include any of Applied’s own equity or debt securities.
 
A summary of the components of net periodic pension costs and the weighted average assumptions used for net periodic pension cost and benefit obligation calculations for fiscal 2005, 2006 and 2007 is presented below.
 
                         
    2005     2006     2007  
    (In thousands, except percentages)  
 
Components of net periodic pension cost
                       
Service cost
  $ 13,835     $ 15,429     $ 15,768  
Interest cost
    7,440       8,938       10,777  
Expected return on plan assets
    (2,727 )     (4,362 )     (6,050 )
Amortization of transition obligation
    67       63       281  
Amortization of prior service costs
    140       174       (139 )
Settlement gain to be recognized
          (5,569 )      
Curtailment loss
                629  
Amortization of net (gain)/loss
    1,641       2,601       1,613  
                         
Net periodic pension cost
  $ 20,396     $ 17,274     $ 22,879  
                         
Weighted average assumptions
                       
Discount rate
    2.0% - 6.3%       2.0% - 6.3%       2.3% - 5.8%  
Expected long-term return on assets
    3.5% - 7.5%       3.5% - 7.5%       2.5% - 8.0%  
Rate of compensation increase
    2.0% - 5.0%       2.0% - 5.0%       2.0% - 6.0%  
 
Asset return assumptions are derived based on actuarial and statistical methodologies, from analysis of long-term historical data relevant to the country in which each plan is in effect and the investments applicable to the corresponding plan. The discount rate for each plan was derived by reference to appropriate benchmark yields on

68


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
high quality corporate bonds, allowing for the approximate duration of both plan obligations and the relevant benchmark index.
 
Future expected benefit payments over the next ten fiscal years are: $7 million in fiscal 2008, $7 million in fiscal 2009, $8 million in fiscal 2010, $8 million in fiscal 2011, $9 million in fiscal 2012, and $58 million collectively for fiscal years 2013 through 2017. Company contributions to these plans for fiscal 2008 are expected to be approximately $9 million.
 
Executive Deferred Compensation Plans Applied sponsors two unfunded deferred compensation plans, the Executive Deferred Compensation Plan (Predecessor EDCP) and the 2005 Executive Deferred Compensation Plan (2005 EDCP), under which certain employees may elect to defer a portion of their following year’s eligible earnings. The Predecessor EDCP was frozen as of December 31, 2004 such that no new deferrals could be made under the plan after that date and the plan would qualify for “grandfather” relief under Section 409A of the Internal Revenue Code. The Predecessor EDCP participant accounts continue to be maintained under the plan and credited with deemed interest. The 2005 EDCP was implemented by Applied effective as of January 1, 2005 and is intended to comply with the requirements of Section 409A of the Internal Revenue Code. Amounts payable, including accrued deemed interest, totaled $79 million at October 29, 2006 and $82 million at October 28, 2007, which were included in other long-term liabilities in the Consolidated Balance Sheets.
 
Post-Retirement Benefits On January 1, 1999, Applied implemented a plan that provides certain medical and vision benefits to eligible retirees who are at least age 55 and who have at least 10 years of service at their date of retirement. An eligible retiree may elect coverage for an eligible spouse or domestic partner who is not eligible for Medicare. Coverage under the plan generally ends for both the retiree and spouse or domestic partner upon becoming eligible for Medicare. As of October 28, 2007, Applied’s liability under the plan was $11 million which was included in other long-term liabilities in the Consolidated Balance Sheets. The discount rate of 5.9% used to calculate the benefit obligation was derived by reference to appropriate benchmark yields on high quality corporate bonds, allowing for the approximate duration of both plan obligations and the relevant benchmark index. Future expected benefit payments over the next ten fiscal years are: $596,000 in fiscal 2008, $637,000 in fiscal 2009, $692,000 in fiscal 2010, $737,000 in fiscal 2011, $742,000 in fiscal 2012, and $5.1 million collectively for fiscal years 2013 through 2017. Company contributions to the plan for fiscal 2008 are anticipated to be approximately $596,000.
 
Note 9   Income Taxes
 
The components of income from operations before income taxes were as follows:
 
                         
Fiscal Year
  2005     2006     2007  
    (In thousands)  
 
U.S. 
  $ 1,256,572     $ 1,760,138     $ 2,047,318  
Foreign
    324,997       406,833       392,335  
                         
    $ 1,581,569     $ 2,166,971     $ 2,439,653  
                         


69


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
The components of the provision for income taxes were as follows:
 
                         
Fiscal Year
  2005     2006     2007  
    (In thousands)  
 
Current:
                       
U.S. 
  $ 233,755     $ 475,984     $ 590,289  
Foreign
    62,824       124,797       99,472  
State
    16,918       24,302       8,054  
                         
      313,497       625,083       697,815  
                         
Deferred:
                       
U.S. 
    95,899       63,837       (17,314 )
Foreign
    13,505       (33,298 )     16,888  
State
    (51,232 )     (5,314 )     32,068  
                         
      58,172       25,225       31,642  
                         
    $ 371,669     $ 650,308     $ 729,457  
                         
 
A reconciliation between the statutory U.S. federal income tax rate of 35 percent and Applied’s actual effective income tax provision rate is as follows:
 
                         
Fiscal Year
  2005     2006     2007  
 
Tax provision at U.S. statutory rate
    35.0 %     35.0 %     35.0 %
Favorable resolutions from audits of prior years’ income tax filings
    (7.5 )     (2.1 )     (1.0 )
Foreign earnings repatriation under the American Jobs Creation Act of 2004
    2.0              
Effect of foreign operations taxed at various rates
    (1.2 )     (0.8 )     (1.6 )
State income taxes, net of federal benefit
    0.6       0.6       1.1  
Research and other tax credits
    (1.2 )     (0.1 )     (0.6 )
Export sales/production benefit
    (5.9 )     (4.2 )     (1.3 )
Other
    1.7       1.6       (1.7 )
                         
      23.5 %     30.0 %     29.9 %
                         
 
The 2007 reconciling items included benefits of $36 million principally related to the favorable resolution of audits of prior years’ income tax filings, partially offset by a $13 million charge from the expensing of equity-based compensation.
 
The 2006 reconciling items included benefits of $61 million principally related to the favorable resolution from audits of prior years’ income tax filings, partially offset by a $17 million charge from the expensing of equity-based compensation.
 
The 2005 reconciling items included benefits of $118 million due to a favorable resolution of audits of prior years’ income tax filings and $14 million relating to a change in estimate with respect to export benefits, partially offset by a charge of $32 million relating to the distribution of foreign earnings under the American Jobs Creation Act of 2004.


70


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. The components of deferred income tax assets and liabilities are as follows:
 
                 
    2006     2007  
    (In thousands)  
 
Deferred tax assets:
               
Inventory reserves and basis difference
  $ 96,615     $ 111,297  
Installation and warranty reserves
    66,909       69,934  
Accrued liabilities
    288,634       245,307  
Restructuring reserves
    8,676       9,275  
Deferred revenue
    62,578       65,597  
Tax credit and net operating loss carryforwards
    64,108       11,020  
Deferred compensation
    30,547       31,263  
Equity-based compensation
    37,751       60,256  
Intangibles
    24,831       40,145  
                 
      680,649       644,094  
                 
Deferred tax liabilities:
               
Depreciation
    (13,889 )     (42,597 )
Purchased technology
    (72,236 )     (87,823 )
Other
    (25,216 )     (27,189 )
                 
      (111,341 )     (157,609 )
                 
    $ 569,308     $ 486,485  
                 
 
The following table presents the breakdown between current and non-current net deferred tax assets and liabilities:
 
                 
Deferred Income Taxes
  2006     2007  
    (In thousands)  
 
Current deferred tax asset
  $ 455,473     $ 424,502  
Non-current deferred tax asset
    113,835       120,654  
Current deferred tax liability
          (5,357 )
Non-current deferred tax liability
          (53,314 )
                 
    $ 569,308     $ 486,485  
                 
 
Current deferred tax liabilities are included in accounts payable and accrued expenses on the Consolidated Balance Sheet and non-current deferred tax liabilities are included in other liabilities on the Consolidated Balance Sheet.
 
For fiscal 2007, U.S. income taxes have not been provided for approximately $286 million of cumulative undistributed earnings of several non-U.S. subsidiaries. Applied intends to reinvest these earnings indefinitely in operations outside of the U.S.
 
As of October 28, 2007, Applied’s tax credit carryforward was $11 million. The carryforward has an indefinite life. Management believes that the tax credit carryforward will be utilized in future periods.
 
Applied’s income taxes payable have been reduced by the tax benefits associated with employee stock option transactions. These benefits, credited directly to stockholders’ equity, amounted to $24 million for fiscal 2006 and


71


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
$50 million for fiscal 2007, with a corresponding reduction to taxes payable of $24 million in fiscal 2006 and $50 million in fiscal 2007.
 
Note 10   Industry Segment and Geographic Operations
 
Applied’s four reportable segments are: Silicon, Fab Solutions, Display, and Adjacent Technologies. Applied’s chief operating decision-maker has been identified as the President and CEO, who reviews operating results to make decisions about allocating resources and assessing performance for the entire Company. Segment information is presented based upon Applied’s management organization structure as of October 28, 2007 and the distinctive nature of each segment. Future changes to this internal financial structure may result in changes to the reportable segments disclosed. Prior to the fourth quarter of fiscal 2006, Applied operated in one reportable segment.
 
Each reportable segment is separately managed and has separate financial results that are reviewed by Applied’s chief operating decision-maker. Each reportable segment contains closely related products that are unique to the particular segment. Segment operating income is determined based upon internal performance measures used by the President and CEO.
 
Applied derives the segment results directly from its internal management reporting system. The accounting policies Applied uses to derive reportable segment results are substantially the same as those used for external reporting purposes. Management measures the performance of each reportable segment based upon several metrics including orders, net sales and operating income. Management uses these results to evaluate the performance of, and to assign resources to, each of the reportable segments. Applied does not allocate to its reportable segments certain operating expenses, which it manages separately at the corporate level. These unallocated costs include equity-based compensation and certain components of variable compensation, corporate marketing and sales, corporate functions (certain management, finance, legal, human resources and RD&E), and unabsorbed information technology and occupancy costs. In addition, Applied does not allocate to its reportable segments restructuring and asset impairment charges and any associated adjustments related to restructuring actions. Segment operating income excludes interest income/expense and other financial charges and income taxes according to how a particular reportable segment’s management is measured. Management does not consider the unallocated costs in measuring the performance of the reportable segments.
 
The Silicon segment includes semiconductor capital equipment for etch, rapid thermal processing (RTP), deposition, chemical mechanical planarization, and metrology and inspection.
 
The Fab Solutions segment includes products to improve the productivity and operating efficiency and lessen the environmental impact of customers’ factories and includes spares and remanufactured equipment sales. Customer demand for spare parts and services is fulfilled through a global distribution system with trained service engineers located in close proximity to customer sites.
 
The Display segment encompasses products and services for manufacturing LCDs for TVs, personal computers and other video-enabled devices. The Display segment also developments, manufactures and supports differentiated stand-alone equipment for the Applied SunFab Thin Film Line.
 
The Adjacent Technologies segment includes products and services for manufacturing solar cells, high throughput roll-to-roll coating systems for flexible electronics, and energy-efficient glass.


72


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Information for each reportable segment as of October 30, 2005, October 29, 2006 and October 28, 2007 and for the years then ended, is as follows:
 
                                         
          Operating
    Depreciation/
    Capital
    Segment
 
    Net Sales     Income     Amortization     Expenditures     Assets  
    (In thousands)  
 
2005:
                                       
Silicon
  $ 4,467,432     $ 1,104,891     $ 170,743     $ 114,951     $ 2,512,756  
Fab Solutions
    1,767,946       399,786       30,485       6,274       921,583  
Display
    756,445       254,320       5,193       14,279       296,599  
Adjacent Technologies
                             
                                         
Total Segment
  $ 6,991,823     $ 1,758,997     $ 206,421     $ 135,504     $ 3,730,938  
                                         
2006:
                                       
Silicon
  $ 5,971,483     $ 2,000,342     $ 159,695     $ 75,315     $ 2,769,127  
Fab Solutions
    2,209,973       623,390       30,605       15,158       1,067,249  
Display
    965,825       318,667       8,270       5,265       584,740  
Adjacent Technologies
    19,733       (8,008 )     3,495       348       293,691  
                                         
Total Segment
  $ 9,167,014     $ 2,934,391     $ 202,065     $ 96,086     $ 4,714,807  
                                         
2007:
                                       
Silicon
  $ 6,511,722     $ 2,378,771     $ 137,943     $ 83,388     $ 2,608,980  
Fab Solutions
    2,196,189       572,199       28,692       39,526       1,229,584  
Display
    862,034       217,153       9,122       3,216       431,789  
Adjacent Technologies
    164,911       (89,364 )     19,637       670       1,031,638  
                                         
Total Segment
  $ 9,734,856     $ 3,078,759     $ 195,394     $ 126,800     $ 5,301,991  
                                         
 
The reconciliation of segment operating results to Applied consolidated totals for the fiscal years ending October 30, 2005, October 29, 2006 and October 28, 2007 is as follows:
 
                         
    2005     2006     2007  
    (In thousands)  
 
Total segment operating income
  $ 1,758,997     $ 2,934,391     $ 3,078,759  
Corporate and unallocated costs
    (311,032 )     (701,657 )     (680,832 )
Restructuring and asset impairment charges
          (212,113 )     (26,421 )
                         
Income from operations
  $ 1,447,965     $ 2,020,621     $ 2,371,506  
                         
 
The reconciliation of depreciation and amortization expense to Applied consolidated totals for the fiscal years ending October 30, 2005, October 29, 2006 and October 28, 2007 is as follows:
 
                         
    2005     2006     2007  
    (In thousands)  
 
Total segment depreciation and amortization
  $ 206,421     $ 202,065     $ 195,394  
Depreciation on shared facilities
    60,287       42,988       37,179  
Depreciation on information technology assets
    22,884       23,528       34,986  
Other
    10,841       1,832       775  
                         
Consolidated depreciation and amortization
  $ 300,433     $ 270,413     $ 268,334  
                         


73


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
The reconciliation of capital expenditures to Applied consolidated totals for the fiscal years ending October 30, 2005, October 29, 2006 and October 28, 2007 is as follows:
 
                         
    2005     2006     2007  
    (In thousands)  
 
Total segment capital expenditures
  $ 135,504     $ 96,086     $ 126,800  
Shared facilities
    8,558       37,329       49,128  
Information technology assets
    49,259       36,083       76,604  
Other
    6,329       9,984       12,252  
                         
Consolidated capital expenditures
  $ 199,650     $ 179,482     $ 264,784  
                         
 
The reconciliation of segment assets to Applied consolidated totals as of October 30, 2005, October 29, 2006 and October 28, 2007 is as follows:
 
                         
    October 30,
    October 29,
    October 28,
 
    2005     2006     2007  
    (In thousands)  
 
Total segment assets
  $ 3,730,938     $ 4,714,807     $ 5,301,991  
Cash and investments
    5,985,221       3,212,199       3,732,004  
Allowance for bad debts
    (3,649 )     (3,342 )     (4,136 )
Assets held for sale
          37,211        
Deferred income taxes
    646,770       569,308       545,156  
Other current assets
    223,477       217,433       337,974  
Common property, plant and equipment
    683,168       551,064       603,453  
Equity-method investment
          144,431       115,060  
Other assets
    3,232       37,726       22,573  
                         
Consolidated total assets
  $ 11,269,157     $ 9,480,837     $ 10,654,075  
                         
 
For geographical reporting, revenue is attributed to the geographic location in which the customers’ facilities are located. Long-lived assets consist primarily of property, plant and equipment and equity-method investments, and are attributed to the geographic location in which they are located. Net sales and long-lived assets by geographic region were as follows:
 
                 
          Long-lived
 
    Net Sales     Assets  
    (In thousands)  
 
2005:
               
North America(1)
  $ 1,472,020     $ 1,060,297  
                 
Taiwan
    1,608,161       17,669  
Japan
    1,395,056       81,705  
Europe
    882,964       88,098  
Korea
    1,021,553       18,811  
Asia-Pacific(2)
    612,069       29,911  
                 
Total outside North America
    5,519,803       236,194  
                 
Consolidated total
  $ 6,991,823     $ 1,296,491  
                 


74


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
                 
          Long-lived
 
    Net Sales     Assets  
    (In thousands)  
 
2006:
               
North America(1)
  $ 1,707,996     $ 894,598  
                 
Taiwan
    2,079,065       16,777  
Japan
    1,518,294       154,432  
Europe
    1,005,923       89,741  
Korea
    1,698,673       5,513  
Asia-Pacific(2)
    1,157,063       36,436  
                 
Total outside North America
    7,459,018       302,899  
                 
Consolidated total
  $ 9,167,014     $ 1,197,497  
                 
2007:
               
North America(1)
  $ 1,554,643     $ 866,531  
                 
Taiwan
    2,678,815       42,622  
Japan
    1,492,694       126,515  
Europe
    955,747       90,879  
Korea
    1,846,867       8,634  
Asia-Pacific(2)
    1,206,090       56,836  
                 
Total outside North America
    8,180,213       325,486  
                 
Consolidated total
  $ 9,734,856     $ 1,192,017  
                 
 
 
(1) Primarily the United States.
 
(2) Includes China.
 
Samsung Electronics Co., Ltd. accounted for 10 percent of Applied’s net sales in 2005, 11 percent of Applied’s net sales in 2006, and 12 percent of Applied’s net sales in 2007. These net sales were for products in multiple reportable segments.
 
Note 11   Commitments and Contingencies
 
Leases
 
Applied leases some of its facilities and equipment under non-cancelable operating leases and has options to renew most leases, with rentals to be negotiated. Total rent expense was $87 million for fiscal 2005, $70 million for fiscal 2006, and $62 million for fiscal 2007. Future minimum lease payments at October 28, 2007 totaled $144 million and were: $59 million for fiscal 2008; $43 million for fiscal 2009; $18 million for fiscal 2010; $8 million for fiscal 2011; $4 million for fiscal 2012; and $12 million collectively for all periods thereafter.
 
Discounted Letters of Credit
 
Applied discounts letters of credit through various financial institutions. Under these agreements, Applied discounted letters of credit in the amounts of $145 million for fiscal 2005, $237 million for fiscal 2006 and $431 million for fiscal 2007. Discounting fees were not material for all periods presented.

75


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Guarantees
 
Applied products are generally sold with a 12-month warranty period following installation. The provision for the estimated cost of warranty is recorded when revenue is recognized. Parts and labor are covered under the terms of the warranty agreement. The warranty provision is based on historical experience by product, configuration and geographic region.
 
Changes in the warranty reserves were as follows:
 
                 
    2006     2007  
    (In thousands)  
 
Beginning balance
  $ 136,613     $ 174,605  
Provisions for warranty
    219,578       184,470  
Consumption of reserves
    (181,586 )     (174,804 )
                 
Ending balance
  $ 174,605     $ 184,271  
                 
 
As noted above, Applied’s products are generally sold with a 12-month warranty. Accordingly, current warranty provisions are related to the current year’s net sales, and warranty consumption is associated with current and prior year’s net sales.
 
During the ordinary course of business, Applied also provides standby letters of credit or other guarantee instruments to certain parties as required for certain transactions initiated by either Applied or its subsidiaries. As of October 28, 2007, the maximum potential amount of future payments that Applied could be required to make under these guarantee agreements was approximately $194 million. Applied has not recorded any liability in connection with these guarantee arrangements below that required to appropriately account for the underlying transaction being guaranteed. Applied does not believe, based on historical experience and information currently available, that it is probable that any amounts will be required to be paid under these guarantee arrangements.
 
Applied also has agreements with various banks to facilitate subsidiary banking operations worldwide, including overdraft arrangements, issuance of bank guarantees, and letters of credit. As of October 28, 2007, Applied Materials Inc. has provided parent guarantees to banks for approximately $85 million to cover these services.
 
Legal Matters
 
Scharf
 
On July 31, 2001, David Scharf, an individual, filed a lawsuit in the United States District Court for the Central District of California against Applied alleging that Applied had infringed, had induced others to infringe, and had contributed to others’ infringement of, a patent concerning color synthesizing scanning electron microscope technology. Mr. Scharf sought a preliminary and permanent injunction, a finding of willful infringement, damages (including treble damages) and costs. Applied answered the complaint and counterclaimed for declaratory judgment of non-infringement and invalidity. On May 10, 2002, Mr. Scharf filed a request for re-examination of his patent with the Patent and Trademark Office (PTO). On June 26, 2002, the case was removed from the Court’s active docket after the parties stipulated to stay the case pending the results of that re-examination. On July 11, 2002, Applied filed its own request for re-examination of Mr. Scharf’s patent with the PTO. Applied’s request for re-examination was granted on September 19, 2002. On April 23, 2004, the PTO notified Applied that it intended to issue a re-examination certificate. On June 14, 2004, Applied filed a second request for re-examination of Mr. Scharf’s patent with the PTO. The second request was denied on September 1, 2004. On October 1, 2004, Applied filed a petition for reconsideration of that denial, which subsequently was denied. The parties completed fact discovery, and on February 22, 2007, the Court held a claim construction hearing. The Court heard oral arguments regarding the parties’ motions for summary judgment on August 13, 2007, and denied both parties’


76


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
motions for summary judgment on August 20, 2007. Effective August 22, 2007, Applied acquired the Scharf patent. Applied and Scharf also mutually stipulated to the dismissal of all claims in the lawsuit with prejudice.
 
Linear
 
On March 12, 2002, Linear Technology Corp. (LTC) filed a lawsuit against Applied in the Superior Court of the County of Santa Clara, California, alleging claims for breach of contract, fraud and deceit, negligent misrepresentation, suppression of fact, unfair competition, breach of warranty, express contractual indemnity, implied equitable indemnity and declaratory relief related to LTC’s assertion that Applied is obligated to indemnify and defend LTC for certain claims in an underlying patent infringement lawsuit brought by Texas Instruments, Inc. After the Court dismissed many of its claims, LTC amended its complaint. LTC’s Amended Complaint, as well as its Second, Third and Fourth Amended Complaints, were dismissed by the Court in whole or in part. On July 7, 2004, LTC filed a Fifth Amended Complaint, which the Court dismissed with prejudice on October 5, 2004. On January 11, 2005, LTC filed a notice of appeal of the dismissal of its complaint, and oral argument of the LTC appeal was heard by the California Sixth District Court of Appeal on April 19, 2007. On June 19, 2007, the Sixth District Court of Appeals entered an order that upheld the trial court’s dismissal of LTC’s claims for fraud and deceit, but reversed the trial court’s dismissal of LTC’s remaining claims and remanded the case to the trial court for further proceedings. On July 30, 2007, Applied filed notice that it would seek review by the California Supreme Court of the reversal and remand order of the Sixth District Court of Appeal. On October 19, 2007, the California Supreme Court denied Applied’s petition for review and returned the case to the Santa Clara Superior Court for further proceedings. Applied believes it has meritorious defenses and intends to pursue them vigorously.
 
Jusung
 
On December 24, 2003, Applied filed a lawsuit against Jusung Engineering Co., Ltd. (Jusung Engineering) and Jusung Pacific Co., Ltd. (Jusung Pacific, referred to together with Jusung Engineering as Jusung) in Tao-Yuan District Court in Taiwan, captioned Applied Materials, Inc. v. Jusung Engineering Co., Ltd. The lawsuit alleges that Jusung is infringing a patent related to chemical vapor deposition owned by Applied. In the lawsuit, Applied seeks a provisional injunction prohibiting Jusung from importing, using, manufacturing, servicing or selling in Taiwan certain flat panel display manufacturing equipment. On December 25, 2003, the Tao-Yuan District Court ruled in favor of Applied’s request for a provisional injunction and, on January 14, 2004, the Court issued a provisional injunction order against Jusung Pacific. Jusung Pacific appealed those decisions, and the decisions were affirmed on appeal. On January 30, 2004, Jusung Pacific requested permission to post a counterbond to have the Jusung Pacific injunction lifted. Jusung Pacific’s counterbond request was granted and, on March 30, 2004, the provisional injunction order was lifted. At Applied’s request, on December 11, 2004, the District Court issued a provisional injunction order against Jusung Engineering. Jusung Engineering appealed that order, and the order was affirmed on appeal. Jusung Engineering also requested permission to post a counterbond to have the Jusung Engineering injunction lifted. Jusung Engineering’s counterbond request was granted, and, on April 25, 2005, the provisional injunction order against Jusung Engineering was lifted. Applied has appealed both counterbond decisions. On June 30, 2004, Applied filed a “main action” patent infringement complaint against Jusung in the Hsinchu District Court in Taiwan, captioned Applied Materials, Inc. v. Jusung Engineering Co., Ltd. In the lawsuit, Applied seeks damages and a permanent injunction for infringement of the same patent. The decisions regarding the provisional injunction and counterbond have no effect on the separate patent infringement lawsuit filed by Applied against Jusung in the Hsinchu Court. In August 2006, the Court set the litigation fee and the litigation security payment, and the main action is now proceeding on its merits. This same patent is the subject of an invalidity proceeding filed in the Taiwanese Patent and Trademark Office by Jusung Pacific in June 2004. Applied believes it has meritorious claims and intends to pursue them vigorously.
 
On June 13, 2006, Applied filed an action in the Taiwanese Patent and Trademark Office challenging the validity of a patent owned by Jusung Engineering related to the severability of the transfer chamber. On June 20, 2006, Jusung Engineering filed a lawsuit against Applied and Applied’s subsidiary, AKT, in Hsinchu District Court


77


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
in Taiwan, captioned Jusung Engineering, Co. Ltd. v. AKT America, Inc. and Applied Materials, Inc., alleging infringement of this patent. Jusung Engineering’s lawsuit seeks damages, costs and attorneys’ fees, but does not seek injunctive relief. Applied believes that it has meritorious defenses that it intends to pursue vigorously. On January 31, 2007, Applied received notice that Jusung filed a complaint of private prosecution in the Taipei District Court of Taiwan dated November 10, 2006, entitled Jusung Engineering Co., Ltd. v. M. Splinter, Y. Lin, C. Lai and J. Lin. The complaint alleges that Applied’s outside counsel received from the Court and used a copy of an expert report that Jusung had filed in the ongoing patent infringement lawsuits and that Jusung had intended to remain confidential. Jusung named as defendants Applied’s Taiwan attorneys, as well as Michael R. Splinter, Applied’s President and Chief Executive Officer, as the statutory representative of Applied. On April 27, 2007 the Taipei District Court dismissed Jusung’s private prosecution complaint. Jusung filed an appeal of the dismissal to the High Court. The High Court affirmed the District Court’s rejection of the private prosecution complaint on June 25, 2007. After the dismissal of the private prosecution complaint, the matter was transferred to the Taipei District Attorney’s Office, which issued a ruling not to prosecute. This ruling was reviewed by the District Attorney’s review body, which in October 2007 returned the matter to the Taipei District Attorney’s Office for further consideration.
 
On April 3, 2007, Jusung filed a complaint against Applied’s subsidiary, AKT America, Inc. (AKT America), and one of its suppliers, in Seoul Central District Court in Seoul, Korea, captioned Jusung Engineering, Co. Ltd. v. AKT America, Inc. The complaint alleges infringement of a Jusung patent involving the showerhead assembly of PECVD equipment for LCDs and seeks injunctive relief. On June 9, 2007, AKT America and its supplier filed an invalidation action with the Korean Intellectual Property Office (KIPO) against the patent asserted by Jusung. On November 30, 2007, the KIPO ruled that the Jusung patent was invalid. Applied believes that it has meritorious defenses that it intends to pursue vigorously. On August 13, 2007, Applied filed a complaint against Jusung in the Seoul Central District Court in Seoul, Korea, captioned Applied Materials, Inc. v. Jusung Engineering Ltd. The complaint alleges infringement of an Applied patent involving a substrate support or housing for a substrate supporting pin used in PECVD equipment for LCDs and seeks both monetary damages and injunctive relief. Jusung has contested its alleged infringement of this patent in the District Court action, and on October 29, 2007 filed an action with the KIPO seeking to invalidate Applied’s patent. Applied has initiated a confirmation of scope action with the Intellectual Property Tribunal of the KIPO based on the same patent.
 
On April 10, 2004, the Taiwan Fair Trade Commission (TFTC) notified Applied’s subsidiary AKT that, pursuant to a complaint filed by Jusung, the TFTC had begun an investigation into whether AKT had violated the Taiwan Fair Trade Act. The investigation focused on whether AKT violated the Taiwan Guidelines for the Review of Cases Involving Enterprises Issuing Warning Letters for Infringement on Copyright, Trademark and Patent Rights by allegedly notifying customers about AKT’s patent rights and the infringement of those rights by Jusung. On June 15, 2004, the TFTC notified Applied that Applied also was the subject of the investigation. The TFTC subsequently notified Applied and AKT America that there was insufficient evidence to support a claim against either company. Jusung appealed the TFTC’s decision, and the appeals court affirmed the decision of the TFTC. Jusung appealed the appeals court’s affirmation of the decision of the TFTC, and in January 2007, the Taipei High Administrative Court dismissed Jusung’s appeal. In February 2007, Jusung appealed the dismissal to the Supreme Administrative Court of Taiwan. Applied believes that Jusung’s complaint is without merit.
 
Silicon Services Consortium
 
On January 19, 2006, five companies that sell refurbished Applied tools (Silicon Services Consortium Inc., Semiconductor Support Services Co., OEM Surplus, Inc., Precision Technician Inc., and Semiconductor Equipment Specialist, Inc.) filed a lawsuit against Applied in the United States District Court for the Western District of Texas, captioned Silicon Services Consortium, Inc., et al. v. Applied Materials, Inc. The plaintiffs claim that a policy that Applied announced in January 2005 of limiting the sale of certain parts to them constituted an unlawful attempt to monopolize the refurbishment business, an interference with existing contracts, and an interference with prospective business relationships. The suit seeks injunctive relief, damages, costs and attorneys’ fees. After Applied filed a motion to dismiss the original complaint, the plaintiffs filed an amended complaint alleging similar


78


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
conduct. Applied filed a motion to dismiss the amended complaint on April 7, 2006, which the Court denied on February 16, 2007. Applied believes it has meritorious defenses and intends to pursue them vigorously. On January 17, 2007, Applied filed a counterclaim asserting claims for patent infringement, trademark infringement, trademark dilution, unfair competition, and misuse and misappropriation of trade secrets against each of the five plaintiffs/counterdefendants. Applied seeks damages, as well as injunctive relief. All claims between Applied and Precision Technician were dismissed in September 2007 pursuant to a settlement, with no payment by either party. The Court began a Markman hearing on October 18, 2007, continued that hearing to December 2007, and directed the parties to participate in mediation in November 2007. In December 2007, Applied reached a settlement with Semiconductor Equipment Specialist of all pending claims between them, under which Applied will pay a non-material sum. The Court has scheduled trial of the remaining claims to commence on November 3, 2008.
 
Applied does not believe that the outcome of any of the above matters will have a material adverse effect on its financial condition or results of operations. From time to time, Applied receives notification from third parties, including customers and suppliers, seeking indemnification, litigation support, payment of money or other actions by Applied in connection with claims made against them. In addition, from time to time, Applied receives notification from third parties claiming that Applied may be or is infringing their intellectual property or other rights. Applied also is subject to various other legal proceedings and claims, both asserted and unasserted, that arise in the ordinary course of business. Although the outcome of these claims and proceedings cannot be predicted with certainty, Applied does not believe that any of these other existing proceedings or claims will have a material adverse effect on its consolidated financial condition or results of operations.
 
Note 12   Business Combinations and Equity-Method Investment
 
On August 23, 2007, Applied acquired all of the outstanding shares of Switzerland-based HCT Shaping Systems SA (HCT) for approximately $463 million in cash, net of cash acquired. HCT is the world’s leading supplier of precision wafering systems used principally in manufacturing crystalline silicon (c-Si) substrates for the solar industry. In connection with this acquisition, Applied recorded goodwill of $347 million and other intangible assets of $180 million. Of the $180 million acquired intangible assets, $59 million was assigned to purchased technology (amortized over 11 years), $59 million was assigned to customer relationships (amortized over 7 years), $47 million was assigned to acquired backlog (amortized over 1 year), $8 million was assigned to trademarks and tradenames (amortized over 13 years) and $7 million was assigned to covenants not to compete (amortized over 3 years).
 
On March 30, 2007, Applied purchased Brooks Software for $137 million in cash. The acquired business is a leading provider of factory management and control software to the semiconductor and flat panel industries. The products complement Applied’s existing software applications and enable Applied to offer customers a comprehensive computer integrated manufacturing (CIM) solution for optimizing fab operations. The acquired business and its employees are being integrated within the Applied Global Services organization, which is reported under the Fab Solutions segment. Applied recorded an in-process research and development (IPR&D) expense of $5 million, reported as research, development and engineering expense, goodwill of $80 million, and other intangible assets of $47 million. Of the $47 million acquired intangible assets, $21 million was assigned to purchased technology (amortized over 4 — 11 years), $21 million was assigned to maintenance contracts (amortized over 7 years), $2 million was assigned to acquired backlog (amortized over 1 year), $2 million was assigned to trademarks and tradenames (amortized over 7 years) and $1 million was assigned to customer relationships (amortized over 4 years).
 
The acquired IPR&D expense was determined by identifying research projects for which technological feasibility had not been established and no alternative future use existed. The value of the projects identified as in-process was determined by estimating the future cash flows from the projects once commercially feasible, discounting the net cash flows back to their present value at a rate commensurate with the level of risk and maturity of the projects, and then applying a percentage of completion to the calculated value.


79


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
On August 14, 2006, Applied’s wholly-owned subsidiary, Metron Technology, Inc. (Metron), purchased certain assets of UMS Solutions’ parts cleaning and recycling business in Singapore for $10 million. The acquisition enhances Metron’s capabilities in Southeast Asia with advanced, high-quality parts cleaning services to support its customers’ semiconductor manufacturing requirements. In connection with this acquisition, Applied recorded goodwill of $7 million and other intangible assets of $1 million.
 
On July 20, 2006, Applied and Dainippon Screen Mfg. Co., Ltd. (Screen) completed the formation of Sokudo, a Japanese joint venture company, to deliver advanced track solutions for customers’ critical semiconductor manufacturing requirements. Screen owns 52 percent and holds the controlling interest in Sokudo, and Applied owns 48 percent. Screen transferred into Sokudo its existing track business and related intellectual property, including employees, products and its installed base of systems. Applied paid $147 million for its investment in Sokudo. Additionally, Applied contributed to Sokudo certain technology and related intellectual property and will provide key development employees. Screen performs manufacturing for Sokudo under an outsourcing agreement. Applied accounts for its interest in Sokudo under the equity method of accounting. Under this accounting method, Applied’s exposure to loss from ongoing operations is limited to $115 million as of October 28, 2007, which represents Applied’s carrying value of its investment in Sokudo. Applied’s investment in Sokudo is classified as an equity-method investment on the Consolidated Balance Sheet. Applied’s investment in Sokudo includes the unamortized excess of Applied’s investment over its equity in the joint venture’s net assets. This excess $33 million at October 28, 2007 is being amortized on a straight-line basis over its estimated useful life of 7 years.
 
On July 7, 2006, Applied completed its acquisition of Applied Films Corporation, a Colorado corporation (Applied Films) and leading supplier of thin film deposition equipment used in manufacturing LCDs, solar cells, flexible electronics and energy-efficient glass. Applied paid $28.50 per share in cash for each outstanding share of Applied Films. The total purchase price was approximately $484 million, or $328 million net of Applied Films’ existing cash and marketable securities. As part of the acquisition, Applied assumed Applied Films’ outstanding stock options and restricted stock awards that, at the acquisition date, had a total fair value of $26 million, of which $18 million was allocated to the purchase price and the remainder to unearned compensation. Upon the acquisition and subject to vesting, Applied Films stock options became exercisable for shares of Applied common stock and Applied Films restricted stock awards became payable in shares of Applied common stock totaling, in the aggregate, 3 million shares of Applied common stock. The fair value of Applied Films’ stock options assumed was determined using a Black-Scholes model. The use of the Black-Scholes model and method of determining the variables is consistent with Applied’s valuation of equity-based compensation awards in accordance with SFAS 123(R) (see Note 1). Applied recorded an in-process research and development expense of $14 million, reported as research, development and engineering expense in the Consolidated Statements of Operations; goodwill of $226 million; and other intangible assets of $140 million. The acquired in-process research and development expense was determined by identifying research projects for which technological feasibility had not been established and no alternative future use existed. The value of the projects identified as in-process was determined by estimating the future cash flows from the projects once commercially feasible, discounting the net cash flows back to their present value at a rate commensurate with the level of risk and maturity of the projects, and then applying a percentage of completion to the calculated value.
 
On December 23, 2005, Applied acquired all of the outstanding shares of ChemTrace Corporation and ChemTrace Precision Cleaning, Inc. for approximately $22 million in cash, net of cash acquired, of which $18 million was paid upon closing. This business provides customers with precision parts cleaning and materials testing solutions. In connection with this acquisition, Applied recorded goodwill of $12 million and other intangible assets of $8 million.
 
On June 28, 2005, Applied purchased certain assets of SCP Global Technology, Inc., consisting of single-wafer, HF-last immersion technology and Marangoni clean/dry intellectual property, for approximately $24 million in cash. In connection with this asset purchase, Applied recorded purchased technology and other intangible assets of $20 million and other items of $4 million.


80


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
On December 16, 2004, Applied acquired the assets of ATMI, Inc.’s Treatment Systems business (EcoSys), which supported the gas abatement requirements of process equipment for integrated circuit manufacturing and other industrial applications, for approximately $16 million in cash. In connection with this acquisition, Applied recorded goodwill of $5 million, purchased technology and other intangible assets of $8 million and other items of $3 million, including liabilities assumed upon acquisition.
 
On December 14, 2004, Applied acquired substantially all of the operating subsidiaries and businesses of Metron Technology N.V., a provider of a range of products and services for fab-wide operations, for approximately $85 million in cash. In connection with this acquisition, Applied recorded goodwill of $76 million and other intangible assets of $31 million, partially offset by other items of $22 million, primarily for net liabilities assumed upon acquisition.
 
For all of the purchase business combinations discussed above, the results of operations prior to the acquisition dates were not material in relation to those of Applied for any of the periods presented herein. Goodwill is not amortized but is reviewed periodically for impairment and purchased technology is amortized over its useful life of 1 to 15 years.
 
Note 13   Subsequent Events
 
On November 9, 2007, Applied purchased from Edwards Vacuum, Inc. certain assets of its Kachina semiconductor equipment parts cleaning and refurbishment business for $19 million. The acquisition complements and expands Applied’s existing Chamber Services network of facilities that provide customers worldwide with state-of-the-art technology and support for maintaining their chamber components.
 
On November 19, 2007, Applied entered into an agreement to acquire all of the outstanding shares of Baccini S.p.A. (Baccini), a privately-held company based in Italy, for €225 million (or approximately $330 million at the exchange rate at the time of announcement) in cash, which is expected to close in early 2008. Baccini is a leading supplier of automated metallization and test systems for manufacturing crystalline silicon (c-Si) photovoltaic (PV) cells. Completion of the transaction is subject to customary closing conditions, including receipt of certain non-U.S. regulatory approvals.
 
At October 28, 2007, cash and cash equivalents included an aggregate investment of $147 million in an enhanced cash fund (the “Fund”). During the period between October 29, 2007 and December 6, 2007, Applied redeemed net $61 million of its investment in the Fund at par value (net of interim transactions). On December 6, 2007, the Fund’s manager notified Applied that: (1) cash redemptions were temporarily suspended, although redemptions could be fulfilled through a pro rata distribution of the underlying securities, consisting principally of high quality corporate debt, mortgage-backed securities and asset-backed securities; (2) the Fund’s valuation will be based on the market value of the underlying securities, whereas historically the Fund’s valuation was based on amortized cost; and (3) interest would continue to accrue. The estimated carrying value of Applied’s investment in the Fund at December 6, 2007 was $86 million and is not considered a cash equivalent due to the suspension of Fund redemptions.


81


Table of Contents

 
APPLIED MATERIALS, INC.
 
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)
 
Note 14   Unaudited Quarterly Consolidated Financial Data
 
                                         
    Fiscal Quarter        
    First     Second     Third     Fourth     Fiscal Year  
    (In thousands, except per share amounts)  
 
2006:
                                       
Net sales
  $ 1,857,592     $ 2,247,686     $ 2,543,443     $ 2,518,293     $ 9,167,014  
Gross margin
  $ 837,699     $ 1,044,625     $ 1,223,354     $ 1,186,124     $ 4,291,802  
Net income
  $ 142,780     $ 412,814     $ 512,040     $ 449,029     $ 1,516,663  
Earnings per share
  $ 0.09     $ 0.26     $ 0.33     $ 0.30     $ 0.97  
2007:
                                       
Net sales
  $ 2,277,267     $ 2,529,561     $ 2,560,984     $ 2,367,044     $ 9,734,856  
Gross margin
  $ 1,062,538     $ 1,136,610     $ 1,216,390     $ 1,076,905     $ 4,492,443  
Net income
  $ 403,476     $ 411,444     $ 473,515     $ 421,761     $ 1,710,196  
Earnings per share
  $ 0.29     $ 0.29     $ 0.34     $ 0.30     $ 1.20  


82


Table of Contents

 
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
The Stockholders and Board of Directors
Applied Materials, Inc.:
 
We have audited the accompanying consolidated balance sheets of Applied Materials, Inc. and subsidiaries (the Company) as of October 28, 2007 and October 29, 2006, and the related consolidated statements of operations, stockholders’ equity and comprehensive income, and cash flows for each of the years in the three-year period ended October 28, 2007. In connection with our audits of the consolidated financial statements, we also have audited the financial statement schedule as of and for each of the years in the three-year period ended October 28, 2007, as set forth under Item 15(a)(2). These consolidated financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule based on our audits.
 
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
 
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Applied Materials, Inc. and subsidiaries as of October 28, 2007 and October 29, 2006, and the results of their operations and their cash flows for each of the years in the three-year period ended October 28, 2007, in conformity with U.S. generally accepted accounting principles. Also in our opinion, the related financial statement schedule as of and for each of the years in the three-year period ended October 28, 2007, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.
 
As discussed in note 1 to the consolidated financial statements, effective October 28, 2007, the Company adopted the provisions of Statement of Financial Accounting Standards (SFAS) No. 158, Employers’ Accounting for Defined Benefit Pension and Other Postretirement Plans — an amendment of FASB Statements No. 87, 88, 106, and 132(R). Also as discussed in note 1 to the consolidated financial statements, effective October 31, 2005, the Company adopted the provisions of SFAS No. 123(R), Share Based Payment, applying the modified-prospective method.
 
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Applied Materials, Inc. and subsidiaries’ internal control over financial reporting as of October 28, 2007, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated December 14, 2007 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.
 
/s/  KPMG LLP
KPMG LLP
 
Mountain View, California
December 14, 2007


83


Table of Contents

INDEX TO EXHIBITS
 
These Exhibits are numbered in accordance with the Exhibit Table of Item 601 of Regulation S-K:
 
         
Exhibit No.
 
Description
 
  2 .1   Agreement and Plan of Merger, dated May 4, 2006, among Applied Materials, Inc., Applied Films Corporation and Blue Acquisition, Inc., incorporated by reference to Applied’s Form 10-Q for the quarter ended July 30, 2006 (file no. 000-06920) filed August 31, 2006.
  3 .1   Certificate of Incorporation of Applied Materials, Inc., as amended and restated through March 31, 2000, incorporated by reference to Applied’s Form 10-Q for the quarter ended April 30, 2000 (file no. 002-45028) filed June 8, 2000.
  3 .2   Certificate of Designation, Preferences and Rights of the Terms of the Series A Junior Participating Preferred Stock dated as of July 9, 1999, incorporated by reference to Applied’s Form 10-Q for the quarter ended August 1, 1999 (file no. 000-06920) filed September 14, 1999.
  3 .3   Bylaws of Applied Materials, Inc., as amended and restated through December 13, 2006, incorporated by reference to Applied’s Form 8-K (file no. 000-06920) filed December 18, 2006.
  4 .1   Form of Indenture (including form of debt security) between Applied Materials, Inc. and Harris Trust Company of California, as Trustee, incorporated by reference to Applied’s Form 8-K (file no. 000-06920) filed August 17, 1994.
  4 .2   Rights Agreement, dated as of July 7, 1999, between Applied Materials, Inc. and Harris Trust and Savings Bank, as Rights Agent, incorporated by reference to Applied’s Registration Statement on Form 8-A (file no. 000-06920) dated July 13, 1999.
  4 .3   First Amendment to Rights Agreement, dated as of November 6, 2002, between Applied Materials, Inc. and Computershare Investor Services, LLC, as Rights Agent, incorporated by reference to Applied’s Registration Statement on Form 8-A/A (file no. 000-06920) dated November 25, 2002.
  10 .1   License Agreement dated January 1, 1992, between Applied Materials and Varian Associates, Inc., incorporated by reference to Applied’s Form 10-K for fiscal year 1992 (file no. 000-06920) filed December 16, 1992.
  10 .2*   Applied Materials, Inc. Executive Deferred Compensation Plan, as amended and restated on April 1, 1995, incorporated by reference to Applied’s Form 10-Q for the quarter ended April 30, 1995 (file no. 000-06920) filed June 7, 1995.
  10 .3*   Amendment No. 1 to the Applied Materials, Inc. Executive Deferred Compensation Plan, incorporated by reference to Applied’s Form 10-Q for the quarter ended July 26, 1998 (file no. 000-06920) filed September 9, 1998.
  10 .4*   Amendment No. 2 to the Applied Materials, Inc. Executive Deferred Compensation Plan, incorporated by reference to Applied’s Form 10-Q for the quarter ended July 26, 1998 (file no. 000-06920) filed September 9, 1998.
  10 .5*   Applied Materials, Inc. Nonqualified Stock Option Agreement related to the Employee Stock Incentive Plan, as amended (formerly named the “Applied Materials, Inc. 1995 Equity Incentive Plan”), incorporated by reference to Applied’s Form 10-Q for the quarter ended May 2, 1999 (file no. 000-06920) filed June 15, 1999.
  10 .6   Form of Indemnification Agreement between Applied Materials, Inc. and Non-Employee Directors, dated June 11, 1999, incorporated by reference to Applied’s Form 10-K for fiscal year 1999 (file no. 333-88777) filed January 31, 2000.
  10 .7   Form of Indemnification Agreement between Applied Materials, Inc. and James C. Morgan and Dan Maydan, dated June 11, 1999, incorporated by reference to Applied’s Form 10-K for fiscal year 1999 (file no. 333-88777) filed January 31, 2000.
  10 .8   Form of Indemnification Agreement between Applied Materials, Inc. and certain of its officers, incorporated by reference to Applied’s Form 10-K for fiscal year 1999 (file no. 333-88777) filed January 31, 2000.
  10 .9*   Form of Applied Materials, Inc. Nonqualified Stock Option Grant Agreement for use under the Employee Stock Incentive Plan, as amended (formerly named the “Applied Materials Inc. 1995 Equity Incentive Plan”) incorporated by reference to Applied’s Form 10-Q for the quarter ended April 29, 2001 (file no. 002-45028) filed June 7, 2001.


84


Table of Contents

         
Exhibit No.
 
Description
 
  10 .10*   Applied Materials, Inc. amended and restated 2000 Global Equity Incentive Plan, incorporated by reference to Applied’s Form 10-K for fiscal year 2002 (file no. 000-06920) filed January 23, 2003.
  10 .11*   Applied Materials, Inc. Profit Sharing Scheme (Ireland), incorporated by reference to Applied’s S-8 (file no. 333-45011) filed January 27, 1998.
  10 .12*   Term Sheet for employment of Michael R. Splinter, incorporated by reference to Applied’s Form 10-Q for the quarter ended April 27, 2003 (file no. 000-06920) filed June 11, 2003.
  10 .13   $250,000,000 Three-Year Credit Agreement dated as of September 19, 2003 among Applied Materials, Inc., Citigroup USA, Inc., as administrative agent, and the lenders listed therein, incorporated by reference to Applied’s Form 10-K for fiscal year 2003 (file no. 000-06920) filed January 13, 2004. (Confidential treatment has been granted for the redacted portions of the agreement.)
  10 .14   Amendment No. 1 to $250,000,000 Three-Year Credit Agreement dated as of September 17, 2004 among Applied Materials, Inc., Citicorp USA, Inc., as administrative agent, and the lenders listed therein, incorporated by reference to Applied’s Form 10-K for fiscal year 2004 (file no. 000-06920) filed December 15, 2004.
  10 .15   Binding Memorandum of Understanding between Applied Materials, Inc. and Novellus Systems, Inc. dated September 20, 2004, incorporated by reference to Applied’s Form 8-K (file no. 000-06920) filed September 24, 2004. (Confidential treatment has been granted for the redacted portions of the agreement.)
  10 .16*   Applied Materials, Inc. Nonemployee Director Share Purchase Plan, incorporated by reference to Applied’s Form 10-Q for the quarter ended May 1, 2005 (file no. 000-06920) filed May 31, 2005.
  10 .17*   Election Form to Receive Shares in lieu of Retainer and/or Meeting Fees for use under the Applied Materials, Inc. Nonemployee Director Share Purchase Plan, incorporated by reference to Applied’s Form 10-Q for the quarter ended May 1, 2005 (file no. 000-06920) filed May 31, 2005.
  10 .18*   Applied Materials, Inc. amended and restated Relocation Policy, incorporated by reference to Applied’s Form 8-K (file no. 000-06920) filed October 31, 2005.
  10 .19*   Form of Restricted Stock Agreement for use under the Applied Materials, Inc. Employee Stock Incentive Plan, as amended, incorporated by reference to Applied’s Form 10-K for fiscal year 2005 (file no. 000-06920) filed December 14, 2005.
  10 .20*   Form of Performance Share Agreement for use under the Applied Materials, Inc. Employee Stock Incentive Plan, as amended, incorporated by reference to Applied’s Form 10-K for fiscal year 2005 (file no. 000-06920) filed December 14, 2005.
  10 .21*   Amendment No. 3 to the Applied Materials, Inc. Executive Deferred Compensation Plan, incorporated by reference to Applied’s Form 10-K for fiscal year 2005 (file no. 000-06920) filed December 14, 2005.
  10 .22*   Amendment No. 4 to the Applied Materials, Inc. Executive Deferred Compensation Plan, incorporated by reference to Applied’s Form 10-K for fiscal year 2005 (file no. 000-06920) filed December 14, 2005.
  10 .23*   Adjustments to Senior Executive Officer Salaries, incorporated by reference to Applied’s Form 10-Q for the quarter ended January 29, 2006 (file no. 000-06920) filed February 28, 2006.
  10 .24*   Compensation of Non-Employee Directors, incorporated by reference to Applied’s Form 10-Q for the quarter ended January 29, 2006 (file no. 000-06920) filed February 28, 2006.
  10 .25*   Performance Goals and Bonus Formula for Fiscal Year 2006 under the Senior Executive Bonus Plan, incorporated by reference to Applied’s Form 10-Q for the quarter ended January 29, 2006 (file no. 000-06920) filed February 28, 2006.
  10 .26*   Adjustments to Nonemployee Director Cash Compensation, incorporated by reference to Applied’s Form 10-Q for the quarter ended July 30, 2006 (file no. 000-06920) filed August 31, 2006.
  10 .27*   Form of Non-Qualified Stock Option Grant Agreement for use under the Applied Materials Employee Stock Incentive Plan, as amended, incorporated by reference to Applied’s Form 10-Q for the quarter ended July 30, 2006 (file no. 000-06920) filed August 31, 2006.
  10 .28*   Form of Non-Qualified Stock Option Grant Agreement for use under the Applied Materials, Inc. 2000 Global Equity Incentive Plan, as amended, incorporated by reference to Applied’s Form 10-Q for the quarter ended July 30, 2006 (file no. 000-06920) filed August 31, 2006.

85


Table of Contents

         
Exhibit No.
 
Description
 
  10 .29*   Form of Performance Shares Agreement for use under the Applied Materials, Inc. Employee Stock Incentive Plan, as amended, incorporated by reference to Applied’s Form 10-Q for the quarter ended July 30, 2006 (file no. 000-06920) filed August 31, 2006.
  10 .30*   Applied Materials, Inc. amended and restated Employee Financial Assistance Plan, incorporated by reference to Applied’s Form 10-K for fiscal year 2006 (file no. 000-06920) filed December 14, 2006.
  10 .31*   Amendment No. 1 to the Applied Materials, Inc. Employee Financial Assistance Plan, incorporated by reference to Applied’s Form 10-K for fiscal year 2006 (file no. 000-06920) filed December 14, 2006.
  10 .32   $100,000,000 364-Day Credit Agreement dated as of September 14, 2006 between Applied Materials, Inc., as borrower, and Citicorp USA, Inc., as lender, incorporated by reference to Applied’s Form 10-K for fiscal year 2006 (file no. 000-06920) filed December 14, 2006. (Confidential treatment has been granted for redacted portions of the agreement.)**
  10 .33   Master Confirmation dated September 18, 2006 between Goldman, Sachs & Co. and Applied Materials, Inc., incorporated by reference to Applied’s Form 10-K for fiscal year 2006 (file no. 000-06920) filed December 14, 2006. (Confidential treatment has been granted for redacted portions of the agreement.)
  10 .34   Supplemental Confirmation dated September 18, 2006 between Goldman, Sachs & Co. and Applied Materials, Inc., incorporated by reference to Applied’s Form 10-K for fiscal year 2006 (file no. 000-06920) filed December 14, 2006. (Confidential treatment has been granted for redacted portions of the agreement.)
  10 .35*   Applied Materials, Inc. amended and restated Senior Executive Bonus Plan, incorporated by reference to Applied’s Definitive Proxy Statement (file no. 000-06920) filed February 14, 2007.
  10 .36*   Separation Agreement and Release between Applied Materials, Inc. and Nancy H. Handel dated December 15, 2006, incorporated by reference to Applied’s Form 10-Q for the quarter ended January 28, 2007 (file no. 000-06920) filed February 28, 2007.
  10 .37   $1,000,000,000 Credit Agreement dated as of January 26, 2007 among Applied Materials, Inc., as borrower, several lenders named therein and Citicorp USA, Inc., as agent for the lenders, incorporated by reference to Applied’s Form 10-Q for the quarter ended January 28, 2007 (file no. 000-06920) filed February 28, 2007. (Confidential treatment has been granted for redacted portions of the agreement.)**
  10 .38*   Form of Non-Qualified Stock Option Grant Agreement for use under the Applied Materials, Inc. Employee Stock Incentive Plan, as amended, incorporated by reference to Applied’s Form 10-Q for the quarter ended April 29, 2007 (file no. 000-06920) filed May 30, 2007.
  10 .39*   Form of Non-Qualified Stock Option Grant Agreement for use under the Applied Materials, Inc. 2000 Global Equity Incentive Plan, as amended, incorporated by reference to Applied’s Form 10-Q for the quarter ended April 29, 2007 (file no. 000-06920) filed May 30, 2007.
  10 .40*   Form of Performance Share Agreement for use under the Applied Materials, Inc. Employee Stock Incentive Plan, as amended, incorporated by reference to Applied’s Form 10-Q for the quarter ended April 29, 2007 (file no. 000-06920) filed May 30, 2007.
  10 .41*   Form of Restricted Stock Agreement for use under the Applied Materials, Inc. Employee Stock Incentive Plan, as amended, incorporated by reference to Applied’s Form 10-Q for the quarter ended April 29, 2007 (file no. 000-06920) filed May 30, 2007.
  10 .42*   Applied Materials, Inc. amended and restated 2005 Executive Deferred Compensation Plan, incorporated by reference to Applied’s Form 8-K (file no. 000-06920) filed July 13, 2007.
  10 .43*   Applied Materials, Inc. amended and restated Global Executive Incentive Plan, incorporated by reference to Applied’s Form 10-Q for the quarter ended July 29, 2007 (file no. 000-06920) filed August 30, 2007.
  10 .44   Share Purchase Agreement among Applied Materials, Inc., the Shareholders of HCT Shaping Systems SA and Sellers’ Representative dated June 25, 2007, incorporated by reference to Applied’s Form 10-Q for the quarter ended July 29, 2007 (file no. 000-06920) filed August 30, 2007.
  10 .45*   Separation Agreement and Release between Applied Materials, Inc. and Farhad Moghadam dated July 19, 2007, incorporated by reference to Applied’s Form 10-Q for the quarter ended July 29, 2007 (file no. 000-06920) filed August 30, 2007.

86


Table of Contents

         
Exhibit No.
 
Description
 
  10 .46*   Adjustments to Executive Officer Salaries, disclosed in Applied’s Form 8-K filed on December 18, 2006, and Fiscal Year 2007 Performance Goals and Performance-Based Equity Awards for Named Executive Officers, disclosed in Applied’s Form 8-K filed on January 29, 2007.
  10 .47*   Applied Materials, Inc. amended and restated Employee Stock Incentive Plan.
  10 .48*   Form of Performance Shares Agreement for use under the Applied Materials, Inc. Employee Stock Incentive Plan, as amended.
  10 .49*   Form of Performance Shares Agreement for Nonemployee Directors for use under the Applied Materials, Inc. Employee Stock Incentive Plan, as amended.
  10 .50*   Form of Non-Qualified Stock Option Grant Agreement for use under the Applied Materials, Inc. Employee Stock Incentive Plan, as amended.
  10 .51*   Form of Restricted Stock Agreement for use under the Applied Materials, Inc. Employee Stock Incentive Plan, as amended.
  10 .52*   Form of Non-Qualified Stock Option Grant Agreement for use under the Applied Materials, Inc. 2000 Global Equity Incentive Plan, as amended.
  10 .53*   Applied Materials, Inc. amended and restated Employees’ Stock Purchase Plan.
  10 .54*   Applied Materials, Inc. amended and restated Stock Purchase Plan for Offshore Employees.
  21     Subsidiaries of Applied Materials, Inc.
  23     Consent of Independent Registered Public Accounting Firm, KPMG LLP.
  24     Power of Attorney.
  31 .1   Certification of Chief Executive Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
  31 .2   Certification of Chief Financial Officer Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
  32 .1   Certification Pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
  32 .2   Certification Pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
 
 
* Indicates a management contract or compensatory plan or arrangement, as required by Item 15(a)3.
 
** Certain schedules and exhibits to this agreement, as set forth in the Table of Contents of the agreement, have been omitted. Applied Materials, Inc. hereby undertakes to furnish supplementally copies of any of the omitted schedules and exhibits upon request by the Securities and Exchange Commission.

87


Table of Contents

 
SIGNATURES
 
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
APPLIED MATERIALS, INC.
 
  By: 
/s/  MICHAEL R. SPLINTER
Michael R. Splinter
President, Chief Executive Officer
 
Dated: December 14, 2007
 
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.
 
             
       
Title
 
Date
 
         
/s/  MICHAEL R. SPLINTER

Michael R. Splinter
  President, Chief Executive Officer and Director (Principal Executive Officer)   December 14, 2007
         
/s/  GEORGE S. DAVIS

George S. Davis
  Senior Vice President, Chief Financial Officer (Principal Financial Officer)   December 14, 2007
         
/s/  YVONNE WEATHERFORD

Yvonne Weatherford
  Corporate Vice President, Corporate Controller (Principal Accounting Officer)   December 14, 2007
             
Directors:            
         
*

James C. Morgan
  Chairman of the Board   December 14, 2007
         
*

Michael H. Armacost
  Director   December 14, 2007
         
*

Robert H. Brust
  Director   December 14, 2007
         
*

Deborah A. Coleman
  Director   December 14, 2007
         
*

Aart J. de Geus
  Director   December 14, 2007
         
*

Philip V. Gerdine
  Director   December 14, 2007


88


Table of Contents

             
       
Title
 
Date
 
         
*

Thomas J. Iannotti
  Director   December 14, 2007
         
*

Charles Y.S. Liu
  Director   December 14, 2007
         
*

Gerhard H. Parker
  Director   December 14, 2007
         
*

Dennis D. Powell
  Director   December 14, 2007
         
*

Willem P. Roelandts
  Director   December 14, 2007
 
Representing a majority of the members of the Board of Directors.
 
  * By 
/s/  MICHAEL R. SPLINTER
 
Michael R. Splinter
Attorney-in-Fact**
 
 
** By authority of the power of attorney filed herewith.


89


Table of Contents

 
SCHEDULE II
 
VALUATION AND QUALIFYING ACCOUNTS
ALLOWANCE FOR DOUBTFUL ACCOUNTS
 
                                         
    Balance at
    Additions —
    Additions —
          Balance at
 
Fiscal Year
  Beginning of Year     Charged to Income     Business Combinations     Deductions     End of Year  
    (In thousands)  
 
2005
  $ 2,533     $ 213     $ 1,220     $ (317)   $ 3,649  
2006
  $ 3,649     $ 582     $     $ (889)   $ 3,342  
2007
  $ 3,342     $ 858     $ 342     $ (406)   $ 4,136  


90