Edgar Filing: SOLITRON DEVICES INC

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended February 28, 2009

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from _______ to _______

Commission File No. 1-4978

SOLITRON DEVICES, INC.

(Name of Registrant as Specified in Its Charter)

Delaware		22-1684144
(State or Other Jurisdiction of Incorporation or Organization)		(IRS Employer Identification Number)
3301 Electronics Way, West Palm Beach, Florida		33407
(Address of Principal Executive Offices)		(Zip Code)

Registrant’s Telephone Number, Including Area Code: (561) 848-4311

Securities registered pursuant to Section 12(b) of the Act:

Title of Each Class		Name of Each Exchange on Which Registered
None		N/A

Securities registered pursuant to Section 12(g) of the Act:

Common Stock, $0.01 par value

(Title of Class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ¨ No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ¨ No x

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ¨ No ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one) :

Large accelerated filer ¨ Accelerated filer ¨ Non-accelerated filer ¨ Smaller reporting company x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ¨ No x

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the registrant as of August 29, 2008 was $6,066,148 (based on the closing sales price of the registrant’s common stock on that date).

The number of shares of the registrant’s common stock, $0.01 par value, outstanding as of May 15, 2009 was 2,263,775.

Table of Contents

		Page

PART I		3
Item 1.	Business	3
Item 1A.	Risk Factors	11
Item 1B.	Unresolved Staff Comments	16
Item 2.	Properties	16
Item 3.	Legal Proceedings	16
Item 4.	Submission of Matters to a Vote of Security Holders	16

Part II		17
Item 5.	Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	17
Item 6.	Selected Financial Data	17
Item 7.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	18
Item 7A.	Quantitative and Qualitative Disclosures About Market Risk	22
Item 8.	Financial Statements and Supplementary Data	23

	Report of Independent Registered Public Accounting Firm	25
	Report of Independent Registered Public Accounting Firm	26

	Solitron Devices, Inc., Notes to Financial Statements	31

Item 9.	Changes In and Disagreements with Accountants on Accounting and Financial Disclosure	43
Item 9A(T).	Controls and Procedures	43
Item 9B.	Other Information	43

Part III		44
Item 10.	Directors, Executive Officers and Corporate Governance	44
Item 11.	Executive Compensation	46
Item 12	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	50
Item 13.	Certain Relationships and Related Transactions, and Director Independence	51
Item 14.	Principal Accountant Fees and Services	51

Part IV		53
Item 15.	Exhibits and Financial Statement Schedules	53

Signatures		55

PART I

ITEM 1.

BUSINESS

GENERAL

Solitron Devices, Inc., a Delaware corporation (the "Company" or "Solitron"), designs, develops, manufactures and markets solid-state semiconductor components and related devices primarily for the military and aerospace markets. The Company manufactures a large variety of bipolar and metal oxide semiconductor ("MOS") power transistors, power and control hybrids, junction and power MOS field effect transistors ("Power MOSFETS"), field effect transistors and other related products. Most of the Company's products are custom made pursuant to contracts with customers whose end products are sold to the United States government. Other products, such as Joint Army/Navy ("JAN") transistors, diodes and Standard Military Drawings (“SMD”) voltage regulators, are sold as standard or catalog items.

The Company was incorporated under the laws of the State of New York in March 1959, and reincorporated under the laws of the State of Delaware in August 1987. For information concerning the Company’s financial condition, results of operations, and related financial data, you should review the “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the “Financial Statements and Supplementary Data” sections of this document. You should also review and consider the risks relating to the Company’s business, operations, financial performance, and cash flows below under “Risk Factors.”

PRODUCTS

The Company designs, manufactures and assembles bipolar and MOS power transistors, power and control hybrids, junction and Power MOSFETs, field effect transistors and other related products.

Set forth below by principal product type are the percentage (i) contributions to the Company's total sales of each of the Company's principal product lines for the fiscal year ended February 28, 2009 and for the fiscal year ended February 29, 2008 and (ii) contributions to the Company's total order backlog at February 28, 2009 and February 29, 2008.

	% of Total Sales			% of Total Sales			% Backlog			% Backlog
	for Fiscal Year Ended			for Fiscal Year Ended			at			at
	February			February			February			February
Product	28, 2009			29, 2008			28, 2009			29, 2008

Power Transistors		14	%		15	%		7	%		12	%
Hybrids		59	%		58	%		58	%		64	%
Field Effect Transistors		8	%		11	%		12	%		10	%
Power MOSFETS		19	%		16	%		23	%		14	%
		100	%		100	%		100	%		100	%

The Company’s backlog at February 28, 2009 and revenue for the year ended February 28, 2009 reflect demand for the Company’s products at such date and for such period. For more information, see “Backlog” below. The variation in the proportionate share of each product line for each period reflects changes emanating from: demand, Congressional appropriations process and timing associated with awards of defense contracts, and shifts in technology and consolidation of defense prime contractors.

The Company’s semiconductor products can be classified as active electronic components. Active electronic components are those that control and direct the flow of electrical current by means of a control signal such as a voltage or current. The Company’s active electronic components include bipolar transistors and MOS transistors.

It is customary to subdivide active electronic components into those of a discrete nature and those which are non-discrete. Discrete devices contain one single semiconductor element; non-discrete devices consist of integrated circuits or hybrid circuits, which contain two or more elements, either active or passive, interconnected to make up a selected complete electrical circuit. In the case of an integrated circuit, a number of active and passive elements are incorporated onto a single silicon chip. A hybrid circuit, on the other hand, is made up of a number of individual components that are mounted onto a suitable surface material, interconnected by various means, and suitably encapsulated. Hybrid and integrated circuits can either be analog or digital; presently, the Company manufactures only analog components. The Company’s products are either standard devices, such as catalog type items (e.g., transistors and voltage regulators), or application-specific devices, also referred to as custom or semi-custom products. The latter are designed and manufactured to meet a customer’s particular requirements. For the fiscal year ended February 28, 2009 approximately 90% of the Company’s sales have been of custom products, and the remaining 10% have been of standard or catalog products.

Approximately 90% of the semiconductor components produced by the Company are manufactured pursuant to approved Source Control Drawings (SCD) from the United States government and/or its prime contractors; the remainder are primarily JAN qualified products approved for use by the military. The Company’s semiconductor products are used as components of military, commercial, and aerospace electronic equipment, such as ground and airborne radar systems, power distribution systems, missiles, missile control systems, and spacecraft. The Company’s products have been used on the space shuttle and on spacecraft sent to the moon, to Jupiter (on Galileo) and, most recently, to Mars (on Global Surveyor and Mars Sojourner). Approximately 90% of the Company’s sales have been attributable to contracts with customers whose products are sold to the United States government. The remaining 10% of sales are for non-military, scientific and industrial applications.

Custom products are typically sold to the United States Government and defense or aerospace companies such as Raytheon Company, Lockheed Martin, Smith Industries, Harris Corporation, General Electric Aviation, and Northrop Grumman Systems Corporation, while standard products are sold to the same customer base and to the general electronic industry and incorporate such items as power supplies and other electronic control products. The Company has standard and custom products available in all of its major product lines.

The following is a general description of the principal product lines manufactured by the Company.

Power Transistors:

Power transistors are high current and/or high voltage control devices commonly used for active gain applications in electronic circuits. The Company manufactures a large variety of power bipolar transistors for applications requiring currents in the range of 0.1A to 150A or voltages in the range of 30V to 1000V. The Company employs over 60 types of silicon chips to manufacture over 500 types of power bipolar transistors and is currently expanding this line in response to increased market demand resulting from other companies’ (e.g., Motorola—now “On” Semiconductors) departure from the military market. The Company also manufactures power diodes under the same military specification. Additionally, it manufactures power N-Channel and P-Channel Power MOSFET transistors and is continuously expanding that line in accordance with customers’ requirements. The Company is qualified to deliver these products under MIL-PRF-19500 in accordance with JAN, JANTX and JANTXV. JAN, JANTX AND JANTXV denotes various quality military screening levels. The Company manufactures both standard and custom power transistors.

The Company has been certified and qualified since 1968 under MIL-PRF-19500 (and its predecessor) standards promulgated by the Defense Supply Center Columbus (“DSCC”). These standards specify the uniformity and quality of bipolar transistors and diodes purchased for United States military programs. The purpose of the program is to standardize the documentation and testing for bipolar semiconductors for use in United States military and aerospace applications. Attainment of certification and/or qualification to MIL-PRF-19500 requirements is important since it is a prerequisite for a manufacturer to be selected to supply bipolar semiconductors for defense-related purposes. MIL-PRF-19500 establishes specific criteria for manufacturing construction techniques and materials used for bipolar semiconductors and assures that these types of devices will be manufactured under conditions that have been demonstrated to be capable of continuously producing highly reliable products. This program requires a manufacturer to demonstrate its products’ performance capabilities. A manufacturer receives certification once its Product Quality Assurance Program Plan is reviewed and approved by DSCC. A manufacturer receives qualification once it has demonstrated that it can build and test a sample product in conformity with its certified Product Quality Assurance Program Plan. The Company expects that its continued maintenance of MIL-PRF-19500 qualification will continue to improve its business posture by increasing product marketability. The Company is currently expanding its Transistor product offering.

Hybrids:

Hybrids are compact electronic circuits that contain a selection of passive and active components mounted on printed substrates and encapsulated in appropriate packages. The Company manufactures thick film hybrids, which generally contain discrete semiconductor chips, integrated circuits, chip capacitors and thick film or thin film resistors. Most of the hybrids are of the high-power type and are custom manufactured for military and aerospace systems. Some of the Company’s hybrids include high power voltage regulators, power amplifiers, power drivers, boosters and controllers. The Company manufactures both standard and custom hybrids.

The Company has been certified (since 1990) and qualified (since 1995) under MIL-PRF-38534 Class H (and its predecessor) standards promulgated by the DSCC. These standards specify the uniformity and quality of hybrid products purchased for United States military programs. The purpose of the program is to standardize the documentation and testing for hybrid microcircuits for use in United States military and aerospace applications. Attainment of certification and/or qualification under MIL-PRF-38534 Class H requirements is important since it is a prerequisite for a manufacturer to be selected to supply hybrids for defense-related purposes. MIL-PRF-38534 Class H establishes definite criteria for manufacturing construction techniques and materials used for hybrid microcircuits and assure that these types of devices will be manufactured under conditions that have been demonstrated to be capable of continuously producing highly reliable products. This program requires a manufacturer to demonstrate its products’ performance capabilities. Certification is a prerequisite of qualification. A manufacturer receives certification once its Product Quality Assurance Program Plan is reviewed and approved by DSCC. A manufacturer receives qualification once it has demonstrated that it can build and test a sample product in conformity with its certified Product Quality Assurance Program Plan. The Company expects that its continued maintenance of MIL-PRF-38534 Class H qualification will continue to improve its business posture by increasing product marketability.

Voltage Regulators:

The Company also qualified a line of voltage regulators in accordance with Class M of MIL-PRF-38535, which allows it to sell these products in accordance with SMD specifications published by DSCC. The Company also makes standard and custom voltage regulators.

Field Effect Transistors:

Field effect transistors are surface-controlled devices where conduction of electrical current is controlled by the electrical potential applied to a capacitively coupled control element. The Company manufactures about 30 different types of junction and MOS field effect transistor chips. They are used to produce over 350 different field effect transistor types. Most of the Company’s field effect transistors conform to standard Joint Electronic Device Engineering Council designated transistors, commonly referred to as standard 2N number types. The Company is currently expanding its Field Effect Transistor product offering. The Company manufactures both standard and custom field effect transistors.

MANUFACTURING

The Company’s engineers design its transistors, diodes, field effect transistors and hybrids, as well as other customized products, based upon requirements established by customers, with the cooperation of the product and marketing personnel. The design of standard or catalog products is based on specific industry standards.

Each new design is first produced on a CAD/CAE (Computer Aided Design/Computer Aided Engineering) computer system. The design layout is then reduced to the desired micro size and transferred to silicon wafers in a series of steps that include photolithography, chemical or plasma etching, oxidation, diffusion and metallization. The wafers then go through a fabrication process. When the process is completed, each wafer contains a large number of silicon chips, each chip being a single transistor device or a single diode. The wafers are tested using a computerized test system prior to being separated into individual chips. The chips are then assembled in standard or custom packages, incorporated in hybrids or sold as chips to other companies. The chips are normally mounted inside a chosen package using eutectic, soft solder or epoxy die attach techniques, and then wire bonded to the package pins using gold or aluminum wires. Many of the packages are manufactured by the Company and, in most cases, the Company plates its packages with gold, nickel or other metals utilizing outside vendors to perform the plating operation.

In the case of hybrids, design engineers formulate the circuit and layout designs. Ceramic substrates are then printed with thick film gold conductors to form the interconnect pattern and with thick film resistive inks to form the resistors of the designed circuit. Semiconductor chips, resistor chips, capacitor chips and inductors are then mounted on the substrates and sequential wire bonding is used to interconnect the various components to the printed substrate, as well as to connect the circuit to the external package pins. The Company manufactures approximately 20% of the hybrid packages it uses and purchases the balance from suppliers.

In addition to Company-performed testing and inspection procedures, certain of the Company’s products are subject to source inspections required by customers (including the United States government). In such cases, designated inspectors are authorized to perform a detailed on-premise inspection of each individual device prior to encapsulation in a casing or before dispatch of the finished unit to ensure that the quality and performance of the product meets the prescribed specifications.

ISO 9001:2000

In March 2000, Underwriters Laboratories awarded the Company ISO 9001 qualification. The ISO 9001 Program is a series of quality management and assurance standards developed by a technical committee of the European Community Commission working under the International Organization for Standardization. During an August 2004 surveillance audit, the Company was subsequently qualified as meeting the new ISO 9001:2000 standard. During the fiscal year ended February 28, 2008, the Company underwent an additional surveillance audit that resulted in recertification.

MARKETING AND CUSTOMERS

The Company’s products are sold throughout the United States and abroad primarily directly and through a network of manufacturers’ representatives and distributors. The Company is represented (i) in the United States by two representative organizations that operate out of 2 different locations with 7 salespeople and 2 stocking distributor organizations that operate out of 12 locations and a third stocking distributor that operates out of 350 sales offices worldwide employing 2,700 people and (ii) in the international market by a representative organization in Israel with one salesperson. The Company also directly employs several sales, marketing, and application engineering personnel to coordinate operations with the representatives and distributors and to handle key accounts.

During the fiscal year ended February 28, 2009, the Company sold products to approximately 120 customers. Of these 120 customers, 52 had not purchased products from the Company during the previous fiscal year. During the fiscal year ended February 28, 2009, Raytheon Company accounted for approximately 35% of total sales, as compared to the 34% it accounted for during the fiscal year ended February 29, 2008. During the fiscal year ended February 28, 2009, sales to BAE Systems Australia accounted for approximately 11% of total sales, as compared to the 8% it accounted for during the fiscal year ended February 29, 2008. Other than Raytheon Company and BAE Systems Australia, the Company had no customers that accounted for more than 10% of net sales during the last fiscal year. Fifteen of the Company’s customers accounted for approximately 88% of the Company’s sales during the fiscal year ended February 28, 2009. It has been the Company’s experience that a large percentage of its sales have been attributable to a relatively small number of customers in any particular period. As a result of the mergers and acquisitions in general, and among large defense contractors in particular, the number of large customers will most likely continue to decline in number, but this does not necessarily mean that the Company will experience a decline in sales. The Company expects customer concentration to continue. The loss of any major customer without offsetting orders from other sources would have a material adverse effect on the business, financial condition and results of operations of the Company.

During the fiscal year ended February 28, 2009 and since that date, a substantial portion of the Company’s products were sold pursuant to contracts or subcontracts with or to customers whose end products are sold to the United States Government. Accordingly, the Company’s sales may be adversely impacted by Congressional appropriations and changes in national defense policies and priorities. As a result of recent Congressional appropriations and a decrease in military spending on programs that the Company participates in, the Company had a 2% decrease in net bookings during the fiscal year ended February 28, 2009 as compared to the previous year. All of the Company’s contracts with the United States Government or its prime contractors contain provisions permitting termination at any time at the convenience of the United States Government or the prime contractor upon payment to the Company of costs incurred plus a reasonable profit.

Although average sales prices are typically higher for products with military and space applications than for products with non-military, scientific and industrial applications, the Company hopes to minimize this differential by focusing on these quality-sensitive niche markets where price sensitivity is very low. There can be no assurance; however, that the Company will be successful in increasing its sales to these market segments, which increase in sales could be critical to the future success of the Company. To date, the Company has made only limited inroads in penetrating such markets.

Sales to foreign customers, located mostly in Canada, Western Europe and Israel, accounted for approximately 14% of the Company’s net sales for the fiscal year ended February 28, 2009 as compared to 12% for the year ended February 29, 2008. All sales to foreign customers are conducted utilizing exclusively U.S. dollars.

BACKLOG

The Company’s order backlog, which consists of semiconductor and hybrid related open orders, more than 96% of which are scheduled for delivery within 12 months, was approximately $6,304,000 at February 28, 2009, as compared to $5,826,000 as of February 29, 2008. The entire backlog consisted of orders for electronic components. The Company currently anticipates that the majority of its open order backlog will be filled by February 28, 2010. In the event that bookings in the long-term decline significantly below the level experienced in the last fiscal year, the Company may be required to implement cost-cutting or other downsizing measures to continue its business operations. Such cost-cutting measures could inhibit future growth prospects. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Bookings and Backlog.”

The Company’s backlog as of any particular date may not be representative of actual sales for any succeeding period because lead times for the release of purchase orders depend upon the scheduling practices of individual customers. The delivery times of new or non-standard products can be affected by scheduling factors and other manufacturing considerations, variances in the rate of booking new orders from month to month and the possibility of customer changes in delivery schedules or cancellations of orders. Also, delivery times of new or non-standard products are affected by the availability of raw material, scheduling factors, manufacturing considerations and customer delivery requirements.

The rate of booking new orders varies significantly from month to month, mostly as a result of sharp fluctuations in the government budgeting and appropriation process. The Company has historically experienced somewhat decreased levels of bookings during the summer months, primarily as a result of such budgeting and appropriation activities. For these reasons, and because of the possibility of customer changes in delivery schedules or cancellations of orders, the Company’s backlog as of any particular date may not be indicative of actual sales for any succeeding period. See “Management’s Discussions and Analysis of Financial Conditions – Result of Operations” for a discussion of the decrease in bookings for the year ended February 28, 2009 as compared to the previous year.

PATENTS AND LICENSES

The Company owned approximately 33 patents (all of which have now expired or have been allowed to lapse) relating to the design and manufacture of its products. The terminations of these patents have not had a material adverse effect on the Company. The Company believes that engineering standards, manufacturing techniques and product reliability are more important to the successful manufacture and sale of its products than the old patents it had.

FUTURE PLANS

The Company plans to obtain quality certification in accordance with quality level AS9100 which will allow the Company to increase its sales of space-level products to customers requiring such quality certification.

To increase liquidity, the Company plans to (a) continue improving operating efficiencies, (b) further reduce overhead expenses, (c) develop alternative lower cost packaging technologies and lower cost packaging supplies, and (d) develop products utilizing its current manufacturing technologies geared toward market segments it is currently unable to serve.

The Company also plans to continue its efforts in selling commercial semiconductors and power modules and to develop appropriate strategic alliance arrangements. If these plans are successful, the Company intends to aggressively pursue sales of these products which could require the Company to invest in the building up of inventories of finished goods and invest in capital (automatic assembly and test) equipment. The source of capital funding will be defined and disclosed subsequent to such strategic partnership being formed. Such financing could come from equipment leasing, among other financing alternatives.

Despite its intentions, the Company cannot assure you that these plans will be successful in easing liquidity problems, reducing costs or improving sales.

COMPETITION

The electronic component industry, in general, is highly competitive and has been characterized by price erosion, rapid technological changes and foreign competition. However, in the market segments in which the Company operates, while highly competitive and subject to the same price erosion, technological change is slow and minimal. The Company believes that it is well regarded by its customers in the segments of the market in which competition is dependent less on price and more on product reliability, performance and service. Management believes, however, that to the extent the Company’s business is targeted at the military and aerospace markets, where there has been virtually no foreign competition, it is subjected to less competition than manufacturers of commercial electronic components. Additionally, the decline in military orders in programs the Company participates in and the shift in the requirement of the Defense Department whereby the use of Commercial Off The Shelf (COTS) components is encouraged over the use of high reliability components that the Company manufactures, prompting the number of competitors to decline, afford the Company the opportunity to increase its market share. As the Company attempts to shift its focus to the sale of products having non-military, non-aerospace applications it will be subject to greater price erosion and foreign competition. The Company continues its efforts to identify a niche market for high-end industrial custom power modules and custom motor controllers where the Company’s capabilities can offer a technological advantage to customers in the motor driver, and power supplies industries. However, there is no guarantee that the Company will be successful in this effort.

The Company has numerous competitors across all of its product lines. The Company is not in direct competition with any other semiconductor manufacturer for an identical mixture of products; however, one or more of the major manufacturers of semiconductors manufactures some of the Company’s products. A few such major competitors (e.g., IXYS Corporation, Motorola Inc. (now On Semiconductors), Intersil Corporation, Fairchild Semiconductor, among others) have elected to withdraw from the military market altogether. However, there is no assurance that the Company’s business will increase as a result of such withdrawals. Other competitors in the military market include International Rectifier (the Omnirel Division), Microsemi Corporation (the NES and APT Divisions), M.S. Kennedy Corporation (a wholly owned subsidiary of Anaren, Inc.), Natel Engineering Company and Sensitron Semiconductor. The Company competes principally on the basis of product quality, turn-around time, customer service and price. The Company believes that competition for sales of products that will ultimately be sold to the United States government has intensified and will continue to intensify as United States defense spending on high reliability components continues to decrease and the Department of Defense pushes for implementation of its 1995 decision to purchase COTS standard products in lieu of products made in accordance with more stringent military specifications.

The Company believes that its primary competitive advantage is its ability to produce high quality products as a result of its years of experience, its sophisticated technologies and its experienced staff. The Company believes that its ability to produce highly reliable custom hybrids in a short period of time will give it a strategic advantage in attempting to penetrate high-end commercial markets and in selling military products complementary with those currently sold, as doing so would enable the Company to produce products early in design and development cycles. The Company believes that it will be able to improve its capability to respond quickly to customer needs and deliver products on time.

EMPLOYEES

At February 28, 2009, the Company had 81 employees (as compared to 83 at February 29, 2008), 54 of whom were engaged in production activities, 3 in sales and marketing, 6 in executive and administrative capacities and 18 in technical and support activities. Of the 81 employees, 77 were full time employees and 4 were part time employees.

The Company has never had a work stoppage, and none of its employees are represented by a labor organization. The Company considers its employee relations to be good.

SOURCES AND AVAILABILITY OF RAW MATERIAL

The Company purchases its raw materials from multiple suppliers and has a minimum of two suppliers for most of its material requirements. A few of the key suppliers of raw materials and finished packages purchased by the Company are: Egide USA Inc., Platronics Seals, CPS Technologies Corporation, Coining Inc., IXYS Corporation, Purecoat International LLC, and Stellar Industries Inc. Because of a diminishing number of sources for components and packages in particular, and the sharp increase in the prices of raw silicon semiconductor wafers, precious metals and gold (used in the finish of the packages), the Company has been obliged to pay higher prices, which consequently has increased costs of goods sold. Should a shortage of three-inch silicon wafers occur, we might not be able to switch our manufacturing capabilities to another size wafer in time to meet our customer’s needs, leading to lost revenues.

EFFECT OF GOVERNMENT REGULATION

The Company received DSCC approval to supply its products in accordance with MIL-PRF-19500 and Class H of MIL-PRF-38534. These qualifications are required to supply to the U.S. Government or its prime contractors. The Company expects that its continued maintenance of these qualifications will continue to improve its business posture by increasing product marketability.

RESEARCH AND DEVELOPMENT

During the last two fiscal years, the Company has not spent any significant funds on research and development. This may have an adverse effect on future operations. The cost of designing custom products is borne in full by the customer, either as a direct charge or is amortized in the unit price charged to the customer.

ENVIRONMENTAL REGULATION

While the Company believes that it has the environmental permits necessary to conduct its business and that its operations conform to present environmental regulations, increased public attention has been focused on the environmental impact of semiconductor manufacturing operations. The Company, in the conduct of its manufacturing operations, has handled and does handle materials that are considered hazardous, toxic or volatile under federal, state and local laws and, therefore, is subject to regulations related to their use, storage, discharge and disposal. No assurance can be made that the risk of accidental release of such materials can be completely eliminated. In the event of a violation of environmental laws, the Company could be held liable for damages and the costs of remediation. In addition, the Company, along with the rest of the semiconductor industry, is subject to variable interpretations and governmental priorities concerning environmental laws and regulations. Environmental statutes have been interpreted to provide for joint and several liability and strict liability regardless of actual fault. There can be no assurance that the Company and its subsidiaries will not be required to incur costs to comply with, or that the operations, business or financial condition of the Company will not be materially adversely affected by current or future environmental laws or regulations.

ENVIRONMENTAL LIABILITIES

The Company entered into an Ability to Pay Multi-Site Settlement Agreement with the United States Environmental Protection Agency (“USEPA”), effective February 24, 2006 (“Settlement Agreement”), to resolve the Company’s alleged liability to USEPA at the following sites: Solitron Microwave Superfund Site, Port Salerno, Florida (“Port Salerno Site”); Petroleum Products Corporation Superfund Site, Pembroke Park, Florida; Casmalia Resources Superfund Site, Santa Barbara, California (“Casmalia Site”); Solitron Devices Site, Riviera Beach, Florida (the “Riviera Beach Site”); and City Industries Superfund Site, Orlando, Florida (collectively, the “Sites”). The Settlement Agreement required the Company to pay to USEPA the sum of $74,000 by February 24, 2008; the Company paid the entire sum of $74,000 to USEPA on February 27, 2006. In addition, the Company is required to pay to USEPA the sum of $10,000 or 5% of Solitron’s net after-tax income over the first $500,000, if any, whichever is greater, for each year from fiscal years 2009-2013. For payment to USEPA to be above $10,000 for any of these five years, the Company’s net income must exceed $700,000 for such year, which has happened in fiscal year 2001, fiscal year 2006, fiscal year 2008, and the current fiscal year. In February 2009, the Company paid $10,000 to USEPA for fiscal year 2009 based on preliminary net income projections and has accrued an additional $15,000 current liability for fiscal year 2009. The final amount will be paid to USEPA in June 2009. This amount is carried as an environmental expense. The Company has accrued $40,000 for its remaining minimum obligations under the Settlement Agreement.

In consideration of the payments made by the Company under the Settlement Agreement, USEPA agreed not to sue or take any administrative action against the Company with regard to any of the Sites. The Company has also been notified by a group of alleged responsible parties formed at the Casmalia Site (“Casmalia PRP Group”) that, based on their review and lack of objection to the Settlement Agreement, the Casmalia PRP Group does not anticipate pursuing Solitron for cost recovery at the Casmalia Site.

On October 21, 1993, a Consent Final Judgment was entered into between the Company and the Florida Department of Environmental Protection (“FDEP”) in the Circuit Court of the Nineteenth Judicial Circuit of Florida in and for Martin County, Florida, in Case No. 91-1232 CA (the “Consent Final Judgment”). The Consent Final Judgment required the Company to remediate the Port Salerno Site and Riviera Beach Site, make monthly payments to escrow accounts for each Site until the sale of the Sites to fund the remediation work, take all reasonable steps to sell the two Sites and, upon the sale of the Sites, apply the net proceeds from the sales to fund the remediation work. Both Sites have been sold (Riviera Beach Site on October 12, 1999 and Port Salerno Site on March 17, 2003) pursuant to purchase agreements approved by FDEP.

Prior to the sale of the Port Salerno Site and Riviera Beach Site, USEPA took over from FDEP as the lead regulatory agency for the remediation of the Sites. At the closing of the sale of each Site, the net proceeds of sale were distributed to USEPA and/or FDEP or other parties, as directed by the agencies. In addition, upon the sale of the Riviera Beach Site, the Riviera Beach Escrow Account was transferred to USEPA, as directed by the agencies. The current balance in the Port Salerno Escrow Account is approximately $58,000. At present, work at the Port Salerno Site is being performed by USEPA. Work at the Riviera Beach Site is being performed by Honeywell, Inc. (“Honeywell”), pursuant to an Administrative Order on Consent entered into between Honeywell and USEPA. The Company has been notified by FDEP that the performance of remediation work by USEPA at the Port Salerno Site and by Honeywell at the Riviera Beach Site will be construed by FDEP as discharging the Company’s remediation obligations under the Consent Final Judgment.

There remains a possibility that FDEP will determine at some time in the future that the final remedy approved by USEPA and implemented at either, or both of, the Port Salerno Site and Riviera Beach Site does not meet the State cleanup requirements imposed by the Consent Final Judgment. If such a final determination is made by FDEP, there is a possibility that FDEP will require the Company to implement additional remedial action at either, or both of, the Port Salerno Site and Riviera Beach Site.

By letter dated November 16, 2006, FDEP notified the Company that FDEP has unreimbursed expenses associated with the Port Salerno Site and Riviera Beach Site of $214,800. FDEP further notified the Company that FDEP required the Company to resume payments under the Consent Final Judgment to ensure that there are adequate funds to cover FDEP’s unreimbursed expenses and the Company’s residual liability under the Consent Final Judgment. During a follow up telephone conversation with the Company’s attorney, FDEP advised the Company that FDEP will prepare a justification for the asserted unreimbursed expenses. Upon receipt of the cost reimbursement package, the Company is required to transfer $58,000.00 from the Port Salerno Escrow Account to FDEP as partial payment for FDEP’s unreimbursed expenses that are otherwise recoverable under the Consent Final Judgment. FDEP further stated, during the telephone conversation, that FDEP will work with the Company to establish a reduced payment schedule for the Company to resume under the Consent Final Judgment based on an appropriate showing by the Company of financial hardship. The Company is currently awaiting receipt of FDEP’s cost reimbursement package. Upon receipt of that documentation, the Company will be required to provide a recommendation to FDEP for resumption of payments to FDEP under the Consent Final Judgment based on the Company’s present ability to pay.

On August 7, 2002, the Company received a Request for Information from the State of New York Department of Environmental Conservation (“NYDEC”), seeking information on whether the Company had disposed of certain wastes at the Clarkstown Landfill Site located in the Town of Clarkstown, Rockland County, New York (The Clarkstown Landfill Site”). By letter dated August 29, 2002, the Company responded to the Request for Information and advised NYDEC that the Company’s former Tappan, New York facility had closed in the mid-1980’s, prior to the initiation of the Company’s bankruptcy proceedings described below. The Company contends that, to the extent that NYDEC has a claim against the Company as a result of the Company’s alleged disposal of wastes at the Clarkstown Landfill Site prior to the closing of the Company’s former Tappan facility in the mid-1980’s, the claim was discharged in bankruptcy as a result of the Bankruptcy Court’s August 1993 Order. At NYDEC’s request, the Company entered into a revised Tolling Agreement with NYDEC on October 8, 2007, which provides for the tolling of applicable statutes of limitation through the earlier of June 26, 2009, or the date the State institutes a suit against the Company for any claims associated with the Clarkstown Landfill Site. It is not known at this time whether NYDEC will pursue a claim against the Company in connection with the Clarkstown Landfill Site. As of the date of this filing, no such claim has been made.

BANKRUPTCY PROCEEDINGS

On January 24, 1992 (the “Petition Date”), the Company and its wholly-owned subsidiary, Solitron Specialty Products, Inc. (f/k/a Solitron Microwave, Inc.), a Delaware corporation, filed voluntary petitions seeking reorganization under Chapter 11 (“Chapter 11”) of the United States Bankruptcy Code, as amended (the “Bankruptcy Code”), in the United States Bankruptcy Court for the Southern District of Florida (the “Bankruptcy Court”). On August 20, 1993, the Bankruptcy Court entered an Order (the “Order of Confirmation”) confirming the Company’s Fourth Amended Plan of Reorganization, as modified by the Company’s First Modification of Fourth Amended Plan of Reorganization (the “Plan of Reorganization” or “Plan”). The Plan became effective on August 30, 1993 (the “Effective Date”). On July 12, 1996, the Bankruptcy Court officially closed the case.

Pursuant to the Plan of Reorganization, beginning in approximately May 1995, the Company was required to begin making quarterly payments to holders of unsecured claims until they received 35% of their claims. However, due to negotiations between the parties, the unsecured creditors agreed to a deferment of this payment and the Company agreed to make payments until its obligations are fulfilled (for more information see “Management’s Discussion and Analysis of Financial Condition and Results of Operations”). At the time, it was estimated that there was an aggregate of approximately $7,100,000 in unsecured claims and, accordingly, that the Company was required to pay approximately $2,292,000 to holders of allowed unsecured claims in quarterly installments of approximately $62,000. On February 28, 2009, the remaining balance of these claims was approximately $1,086,000.

Beginning on the date the Company’s net after tax income exceeds $500,000, the Company is obligated to pay (on an annual basis) each of the holders of unsecured claims (pro rata) and Vector Trading and Holding Corporation (“Vector”), a successor to certain assets and liabilities of the Company, and Vector’s participants and successors, 5% of its net after tax income in excess of $500,000 until the tenth anniversary of the Effective Date, up to a maximum aggregate of $1,500,000 to the holders of unsecured claims (pro rata) and up to a maximum aggregate of $1,500,000 to Vector participants and their successors (the “Profit Participation”). As the Company earned $637,000 in the fiscal year ended February 28, 2001, net after the accrual of $15,000 for the Profit Participation, it distributed, during the fiscal year ended February 28, 2002, approximately $7,500 to its unsecured creditors and approximately $7,500 to Vector and its successors in interest as contemplated by the Plan. As net income for the fiscal years ended February 28, 2003, 2004 and 2005 did not exceed $500,000, there were no distributions related to those fiscal years. As of August 2005, this obligation for profit participation had expired.

ITEM 1A. RISK FACTORS

The following important business risks and factors, and those business risks and factors described elsewhere in this report or our other Securities and Exchange Commission filings, could cause our actual results to differ materially from those stated in our forward-looking statements, and which could affect the value of an investment in the Company. All references to “we”, “us”, “our” and the like refer to the Company.

Our complex manufacturing processes may lower yields and reduce our revenues.

Our manufacturing processes are highly complex, require advanced and costly equipment and are continuously being modified in an effort to improve yields and product performance. Minute impurities or other difficulties in the manufacturing process can lower yields. Our manufacturing efficiency will be an important factor in our future profitability, and we cannot assure you that we will be able to maintain our manufacturing efficiency or increase manufacturing efficiency to the same extent as our competitors.

In addition, as is common in the semiconductor industry, we have from time to time experienced difficulty in effecting transitions to new manufacturing processes. As a consequence, we may suffer delays in product deliveries or reduced yields. We may experience manufacturing problems in achieving acceptable yields or experience product delivery delays in the future as a result of, among other things, capacity constraints, construction delays, upgrading or expanding existing facilities or changing our process technologies, any of which could result in a loss of future revenues. Our operating results could also be adversely affected by the increase in fixed costs and operating expenses related to increases in production capability if revenues do not increase proportionately.

Our ability to repair and maintain the aging manufacturing equipment we own may adversely affect our ability to deliver products to our customers’ requirements. We may be forced to expend significant funds in order to acquire replacement capital equipment that may not be readily available, thus resulting in manufacturing delays.

Our business could be materially and adversely affected if we are unable to obtain qualified supplies of raw materials, parts and finished components on a timely basis and at a cost-effective price.

The Company relies on its relationships with certain key suppliers for its supply of raw materials, parts and finished components that are qualified for use in the end-products the Company manufactures. While the Company currently has favorable working relationships with its suppliers, it cannot be sure that these relationships will continue in the future. Additionally, the Company cannot guarantee the availability or pricing of raw materials. The price of qualified raw materials can be highly volatile due to several factors, including a general shortage of raw materials, an unexpected increase in the demand for raw materials, disruptions in the suppliers’ business and competitive pressure among suppliers of raw materials to increase the price of raw materials. Suppliers may also choose, from time to time, to extend lead times or limit supplies due to a shortage in supplies. Additionally, some of the Company’s key suppliers of raw materials may have the capability of manufacturing the end products themselves and may therefore cease to supply the Company with its raw materials and compete directly with the Company for the manufacture of the end-products. Any interruption in availability of these qualified raw materials may impair the Company’s ability to manufacture its products on a timely and cost-effective basis. If the Company must identify alternative sources for its qualified raw materials, it would be adversely affected due to the time and process required in order for such alternative raw materials to be qualified for use in the applicable end-products. Any significant price increase in the Company’s raw materials that cannot be passed on to customers or a shortage in the supply of raw materials could have a material adverse effect on the Company’s business, financial condition or results of operations.

We are dependent on government contracts, which are subject to termination, price renegotiations and regulatory compliance, which can increase the cost of doing business and negatively impact our revenues.

All of our contracts with the U.S. government and its prime contractors contain customary provisions permitting termination at any time at the convenience of the U.S. government or its prime contractors upon payment to us for costs incurred plus a reasonable profit. Certain contracts are also subject to price renegotiations in accordance with U.S. government sole source procurement provisions. Nevertheless, we cannot assure you that the foregoing government contracting risks will not materially and adversely affect our business, prospects, financial condition or results of operations. Furthermore, we cannot assure you that we would be able to procure new government contracts to offset any revenue losses incurred due to early termination or price renegotiation of existing government contracts.

Our government business is also subject to specific procurement regulations, which increase our performance and compliance costs. These costs might increase in the future, reducing our margins. Failure to comply with procurement regulations could lead to suspension or debarment, for cause, from government subcontracting for a period of time. Among the causes for debarment are violations of various statutes, including those related to procurement integrity, export control, government security regulations, employment practices, protection of the environment, and accuracy of records. The termination of a government contract or relationship as a result of any of these violations would have a negative impact on our reputation and operations, and could negatively impact our ability to obtain future government contracts.

Changes in government policy or economic conditions could negatively impact our results.

A large portion of the Company’s sales are to military and aerospace markets which are subject to the business risk of changes in governmental appropriations and changes in national defense policies and priorities. Any such changes could result in a change in demand for the Company’s products, which could have a material effect on the Company’s business, prospects, financial condition and results of operations.

Our results may also be affected by changes in trade, monetary and fiscal policies, laws and regulations, or other activities of U.S. and non-U.S. governments, agencies and similar organizations. Furthermore, our business, prospects, financial condition and results of operations may be adversely affected by the shift in the requirement of the U.S. Department of Defense policy toward the use of standard industrial components over the use of high reliability components that we manufacture. Our results may also be affected by social and economic conditions, which impact our sales, including in markets subject to ongoing political hostilities, such as regions of the Middle East.

Our inventories may become obsolete and other assets may be subject to risks.

The life cycles of some of our products depend heavily upon the life cycles of the end products into which our products are designed. Products with short life cycles require us to manage closely our production and inventory levels. Inventory may also become obsolete because of adverse changes in end-market demand. We may in the future be adversely affected by obsolete or excess inventories which may result from unanticipated changes in the estimated total demand for our products or the estimated life cycles of the end products into which our products are designed. The asset values determined under Generally Accepted Accounting Principles for inventory and other assets each involve the making of material estimates by us, many of which could be based on mistaken assumptions or judgments.

Environmental regulations could require us to incur significant costs.

In the conduct of our manufacturing operations, we have handled and do handle materials that are considered hazardous, toxic or volatile under federal, state and local laws and, therefore, are subject to regulations related to their use, storage, discharge and disposal. No assurance can be made that the risk of accidental release of such materials can be completely eliminated. In the event of a violation of environmental laws, we could be held liable for damages and the cost of remediation and, along with the rest of the semiconductor industry, we are subject to variable interpretations and governmental priorities concerning environmental laws and regulations. Environmental statutes have been interpreted to provide for joint and several liability and strict liability regardless of actual fault. There can be no assurance that we will not be required to incur costs to comply with, or that our operations, business or financial condition will not be materially affected by, current or future environmental laws or regulations. See “Business – Environmental Liabilities.”

Our business is highly competitive, and increased competition could reduce gross profit margins and the value of an investment in our Company.

The semiconductor industry, and the semiconductor product markets specifically, are highly competitive. Competition is based on price, product performance, quality, turn-around time, reliability and customer service. The gross profit margins realizable in our markets can differ across regions, depending on the economic strength of end-product markets in those regions. Even in strong markets, price pressures may emerge as competitors attempt to gain more share by lowering prices. Competition in the various markets in which we participate comes from companies of various sizes, many of which are larger and have greater financial and other resources than we have and thus can better withstand adverse economic or market conditions. In addition, companies not currently in direct competition with us may introduce competing products in the future.

Downturns in the business cycle could reduce the revenues and profitability of our business.

The semiconductor industry is highly cyclical. Semiconductor industry-wide sales declined significantly in 2001, 2002 2004, 2008, and the beginning of 2009. Our markets may experience other, possibly more severe and prolonged, downturns in the future. We may also experience significant changes in our operating profit margins as a result of variations in sales, changes in product mix, price competition for orders and costs associated with the introduction of new products.

Our operating results may decrease due to the decline of profitability in the semiconductor industry.

Intense competition and a general slowdown in the demand for military-rated semiconductors worldwide have resulted in decreases in the profitability of many of our products. We expect that profitability for our products will continue to decline in the future. A decline in profitability for our products, if not offset by reductions in the costs of manufacturing these products, would decrease our profits and could have a material adverse effect on our business, financial condition and results of operations.

Uncertainty of current economic conditions, domestically and globally, could continue to affect demand for our products and negatively impact our business.

Current conditions in the domestic and global economies are extremely uncertain. As a result, it is difficult to estimate the level of growth for the economy as a whole. It is even more difficult to estimate growth in various parts of the economy, including the markets in which we participate. Because all components of our budgeting and forecasting are dependent upon estimates of growth in the markets we serve and demand for our products, the prevailing economic uncertainties render estimates of future income and expenditures even more difficult than usual to make. The future direction of the overall domestic and global economies will have a significant impact on our overall performance.

Cost reduction efforts may be unsuccessful or insufficient to improve our profitability and may adversely impact productivity.

During fiscal years 2008 and 2009, we continued certain cost-cutting measures originally started several years ago, and we have a plan to implement further cost-saving measures if necessary. The impact of these cost-reduction efforts on our profitability may be influenced by:

our ability to successfully complete these ongoing efforts;

the possibility that these efforts may not generate the level of cost savings we expect or enable us to effectively compete and return to profitability; and

the risk that we may not be able to retain key employees.

Since these cost-reduction efforts involve all aspects of our business, they could adversely impact productivity to an extent we did not anticipate and may inhibit future growth prospects.

We may not achieve the intended effects of our new business strategy, which could adversely impact our business, financial condition and results of operations.

In recognition of the changes in global geopolitical affairs and in United States military spending, we are attempting to increase sales of our products for non-military, scientific and industrial niche markets, such as medical electronics, machine tool controls, satellites, telecommunications networks and other market segments in which purchasing decisions are generally based primarily on product quality, long-term reliability and performance, rather than on product price. We are also attempting to offer additional products to the military markets that are complementary to those we currently sell to the military markets. We cannot assure you that these efforts will be successful and, if they are, that they will have the intended effects of increasing profitability. Furthermore, as we attempt to shift our focus to the sale of products having non-military, non-aerospace applications, we will be subject to greater price erosion and foreign competition.

Our inability to introduce new products could result in decreased revenues and loss of market share to competitors; new technologies could also reduce the demand for our products.

Rapidly changing technology and industry standards, along with frequent new product introductions, characterize the semiconductor industry. Our success in these markets depends on our ability to design, develop, manufacture, assemble, test, market and support new products and enhancements on a timely and cost-effective basis. There can be no assurance that we will successfully identify new product opportunities and develop and bring new products to market in a timely and cost-effective manner or those products or technologies developed by others will not render our products or technologies obsolete or noncompetitive. A fundamental shift in technology in our product markets could have a material adverse effect on us. In light of the fact that many of our competitors have substantially greater revenues than us and that we have not spent any funds on research and development in recent years, we may not be able to accomplish the foregoing, which might have a material adverse effect on the Company, our business, prospects, financial condition or results of operations.

Loss of, or reduction of business from, substantial clients could hurt our business by reducing our revenues, profitability and cash flow.

During the fiscal year ended February 28, 2009, fifteen customers accounted for approximately 88% of our revenues. The loss or financial failure of any significant customer or distributor, any reduction in orders by any of our significant customers or distributors, or the cancellation of a significant order could materially and adversely affect our business. Furthermore, due to industry consolidation, the loss of any one customer or significant order may have a greater impact than we anticipate. We cannot guarantee that we will be able to retain long-term relationships or secure renewals of short-term relationships with our more substantial customers in the future.

A shortage of three-inch silicon wafers could result in lost revenues due to an inability to build our products.

Some of our products contain components manufactured in-house from three-inch silicon wafers. The worldwide supply of three-inch silicon wafers is dwindling. We currently have enough wafers in inventory and on order to meet our manufacturing needs for three years. Should a shortage of three-inch silicon wafers occur, or if we are not able to obtain three-inch silicon wafers at an economically suitable cost, we may not be able to switch our manufacturing capabilities to another size wafer in time to meet our customer’s needs, leading to lost revenues.

The nature of our products exposes us to potentially significant product liability risk.

Our business exposes us to potential product liability risks that are inherent in the manufacturing and marketing of high-reliability electronic components for critical applications. No assurance can be made that our product liability insurance coverage is adequate or that present coverage will continue to be available at acceptable costs, or that a product liability claim would not materially and adversely affect our business, prospects, financial conditions or results of operations.

We depend on the recruitment and retention of qualified personnel, and our failure to attract and retain such personnel could seriously harm our business.

Due to the specialized nature of our business, our future performance is highly dependent on the continued services of our key engineering personnel and executive officers. Our prospects depend on our ability to attract and retain qualified engineering, manufacturing, marketing, sales and management personnel for our operations. Competition for personnel is intense, and we may not be successful in attracting or retaining qualified personnel. Our failure to compete for these personnel could seriously harm our business, prospects, results of operations and financial condition.

Provisions in our charter documents and rights agreement could make it more difficult to acquire our Company and may reduce the market price of our stock.

Our Certificate of Incorporation and Bylaws contain certain provisions, and we have adopted a stockholder rights plan (as more fully described in our current report on Form 8-K filed on June 20, 2001), each of which could delay or prevent a change in control of our company or the removal of management, and which could also deter potential acquirers from making an offer to our stockholders and limit any opportunity to realize premiums over prevailing market prices of our common stock.

Natural disasters, like hurricanes, or occurrences of other natural disasters whether in the United States or internationally may affect the markets in which our common stock trades, the markets in which we operate and our profitability.

Natural disasters, like those related to hurricanes, or threats or occurrences of other similar events, whether in the United States or internationally, may affect the markets in which our common stock trades, the markets in which we operate and our profitability. Hurricanes have affected us in the past, and may continue to affect us in the future, resulting in damage to our manufacturing facility in South Florida and our manufacturing equipment, office closures and impairing our ability to produce and deliver our products. Such events could also affect our domestic and international sales, disrupt our supply chains, primarily for raw materials and process chemicals and gases, affect the physical facilities of our suppliers or customers, and make transportation of our supplies and products more difficult or cost prohibitive. Due to the broad and uncertain effects that natural events have had on financial and economic markets generally, we cannot provide any estimate of how these activities might affect our future results.

Failure to protect our proprietary technologies or maintain the right to use certain technologies may negatively affect our ability to compete.

We rely heavily on our proprietary technologies. Our future success and competitive position may depend in part upon our ability to obtain or maintain protection of certain proprietary technologies used in our principal products. We do not have patent protection on many aspects of our technology. Our reliance upon protection of some of our technology as “trade secrets” will not necessarily protect us from the use by other persons of our technology, or their use of technology that is similar or superior to that which is embodied in our trade secrets. Others may be able to independently duplicate or exceed our technology in whole or in part. We may not be successful in maintaining the confidentiality of our technology, dissemination of which could have material adverse effects on our business. In addition, litigation may be necessary to determine the scope and validity of our proprietary rights.

Obtaining or protecting our proprietary rights may require us to defend claims of intellectual property infringement by our competitors. We could become subject to lawsuits in which it is alleged that we have infringed or are infringing upon the intellectual property rights of others with or without our prior awareness of the existence of those third-party rights, if any.

If any infringements, real or imagined, happen to exist, arise or are claimed in the future, we may be exposed to substantial liability for damages and may need to obtain licenses from the patent owners, discontinue or change our processes or products or expend significant resources to develop or acquire non-infringing technologies. We may not be successful in such efforts or such licenses may not be available under reasonable terms. Our failure to develop or

acquire non-infringing technologies or to obtain licenses on acceptable terms or the occurrence of related litigation itself could have material adverse effects on our operating results, financial condition and cash flows.

The price of our common stock has fluctuated widely in the past and may fluctuate widely in the future.

Our common stock, which is traded on the over-the-counter bulletin board, has experienced and may continue to experience significant price and volume fluctuations that could adversely affect the market price of our common stock without regard to our operating performance. In addition, we believe that factors such as quarterly fluctuations in financial results, financial performance and other activities of other publicly traded companies in the semiconductor industry could cause the price of our common stock to fluctuate substantially. In addition, in recent periods, our common stock, the stock market in general and the market for shares of semiconductor industry-related stocks in particular have experienced extreme price fluctuations which have often been unrelated to the operating performance of the affected companies. Any similar fluctuations in the future could adversely affect the market price of our common stock.

ITEM 1B

UNRESOLVED STAFF COMMENTS.

None

ITEM 2.

PROPERTIES.

The Company’s manufacturing operations and its corporate headquarters are located in one leased facility in West Palm Beach, Florida. The Company leases approximately 47,000 sq. ft. for its facility. The lease is for a term of ten years ending on December 31, 2011 and does not include an option to renew the lease under current terms. The Company believes that its facility in West Palm Beach, Florida is suitable and adequate to meet its requirements currently and for the foreseeable future.

ITEM 3.

LEGAL PROCEEDINGS

We may from time to time become a party to various legal proceedings arising in the ordinary course of business. As of February 28, 2009, we had no known material current, pending, or threatened litigation.

ITEM 4.

SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

None.

PART II

ITEM 5.

MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Since March 1995, the Company’s Common Stock has been traded on the Over The Counter Bulletin Board (“OTCBB”). The Company’s Common Stock was traded on the New York Stock Exchange until October 13, 1993, at which time it began trading on the NASDAQ Small Cap Market where it was traded until March 1995.

The following table sets forth for the periods indicated, high and low bid information of the Common Stock as reported by the OTCBB. The prices set forth below reflect inter-dealer prices, without retail mark-up, mark-down, or commission and may not necessarily represent actual transactions.

	FISCAL YEAR ENDED				FISCAL YEAR ENDED
	FEBRUARY 28, 2009				FEBRUARY 29, 2008

	HIGH		LOW		HIGH		LOW

First Quarter	$	3.30	$	1.50	$	1.98	$	1.55
Second Quarter	$	3.48	$	2.28	$	2.11	$	1.58
Third Quarter	$	2.98	$	2.10	$	2.49	$	2.00
Fourth Quarter	$	2.60	$	1.65	$	2.95	$	2.37

As of May 15, 2009, there were approximately 1,738 holders of record of the Company’s Common Stock. On May 12, 2009, the last sale price of the Common Stock as reported on the OTCBB was $2.00 per share.

Certificates representing 44,930 “old shares” of Common Stock, which were subject to an approximate 10 to 1 reverse split (which was authorized by the Bankruptcy Court on September 1993), have not been exchanged by the stockholders as of February 28, 2009. Subsequent to such stock split, these certificates now represent 4,393 shares of Common Stock, which are included in the 2,263,775 shares outstanding as of February 28, 2009 indicated in the beginning of this filing. These “old shares” have been included in the number of shares outstanding as set forth in the Company’s filings with the commission since the date of such stock split through its Annual Report on Form 10-K for the period ended February 28, 2009.

The Company has 173,287 shares of treasury stock in certificate form in its possession. These shares of treasury stock are not included in the number of shares issued and outstanding for the fiscal years ended February 28, 2009 and February 29, 2008.

The Company has not paid any dividends since emerging from bankruptcy and the Company does not contemplate declaring dividends in the foreseeable future. Pursuant to the Company’s ability to pay its settlement proposal with USEPA, the Company agreed not to pay dividends on any shares of capital stock until the settlement amount for environmental liabilities is agreed upon and paid in full.

During the fiscal year ended February 28, 2009, the Company did not issue any shares of its Common Stock to employees.

ITEM 6.

SELECTED FINANCIAL DATA.

Not applicable.

ITEM 7.

MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

You should read the following discussion in conjunction with the “Financial Statements and Supplementary Data” section of this Annual Report on Form 10-K. You also should review and consider the risks relating to the Company’s business, operations, financial performance, and cash flows presented earlier under “Risk Factors.”

INTRODUCTION

The Company designs, develops, manufactures and markets solid-state semiconductor components and related devices primarily for the military and aerospace markets. The Company manufactures a large variety of bipolar and MOS power transistors, power and control hybrids, junction and power MOFSET’s, field effect transistors and other related products. Most of the Company’s products are custom made pursuant to contracts with customers whose end products are sold to the United States government. Other products, such as JAN transistors, diodes and SMD voltage regulators, are sold as standard or catalog items.

The following table is included solely for use in comparative analysis of income before extraordinary items to complement Management’s Discussion and Analysis of Financial Condition and Results of Operations:

	(Dollars in Thousands)
	Year Ended February 28/29,
	2009			2008

Net Sales	$	8,459		$	7,792
Cost of sales		6,338			5,893
Gross profit		2,121			1,899
Selling, general and administrative expenses		1,191			1,149
Operating income		930			750
Interest income		64			162
Environmental Expenses/Other, net		(3	)		16
Income tax expense		22			3
Net income	$	969		$	925

TRENDS AND UNCERTAINTIES:

During the fiscal year ended February 28, 2009, the Company’s book-to-bill ratio was approximately 1.06 as compared to approximately 1.17 for the fiscal year ended February 29, 2008 reflecting a decrease in the volume of orders booked. The Company does not believe that, in most years, the year-to-year change in the book-to-bill ratio indicates a specific trend in the demand for the Company’s products. Generally, the intake of orders over the last twenty four months has varied greatly as a result of the fluctuations in the general economy, variations in defense spending on programs the Company supports, and the timing of contract awards by the Department of Defense and subsequently by its prime contractors, which is expected to continue over the next twelve to twenty four months. The Company continues to identify means intended to reduce its variable manufacturing costs to offset the potential impact of low volume of orders to be shipped. However, should order intake fall drastically below the level experienced in the last twenty four months, the Company might be required to implement further cost cutting or other downsizing measures to continue its business operations.

SIGNIFICANT ACCOUNTING PRINCIPLES:

Cash and Cash Equivalents

Cash and cash equivalents include demand deposits and money market accounts.

Treasury Bills

During the first quarter of fiscal year 2008, the Company’s management decided to reclassify its investment in treasury bills from cash and cash equivalents and report it separately as “Investment in Treasury Bills”. Investment in Treasury Bills includes treasury bills with maturities of one year or less and is stated at market value. The corresponding amount of cash and cash equivalents shown on the prior period balance sheet and statement of cash flows has been reclassified to reflect this change in accounting principle (see footnote 1).

Earnings Per Common Share

Earnings per common share is presented in accordance with SFAS No. 128 “Earnings per Share.” Basic earnings per common share is computed using the weighted average number of common shares outstanding during the period. Diluted earnings per common share incorporate the incremental shares issuable upon the assumed exercise of stock options to the extent they are not anti-dilutive using the treasury stock method.

Shipping and Handling

Shipping and handling costs billed to customers by the Company are recorded in net sales. Shipping costs incurred by the Company are recorded in cost of sales.

Inventories

Inventories are stated at the lower of cost or market. Cost is determined using the “first-in, first-out” (FIFO) method. The Company buys raw material only to fill customer orders. Excess raw material is created only when a vendor imposes a minimum buy in excess of actual requirements. Such excess material will usually be utilized to meet the requirements of the customer’s subsequent orders. If excess material is not utilized after two fiscal years it is fully reserved. Any inventory item once designated as reserved is carried at zero value in all subsequent valuation activities.

The Company’s inventory valuation policy is as follows:

Raw material /Work in process:		All material purchased, processed and/or used in the last two fiscal years is valued at the lower of its acquisition cost or market. All material not purchased/used in the last two fiscal years is fully reserved for.

Finished goods:		All finished goods with firm orders for later delivery are valued (material and overhead) at the lower or cost or market. All finished goods with no orders are fully reserved.

RESULTS OF OPERATIONS

2009 vs. 2008

Net sales for the fiscal year ended February 28, 2009 increased by approximately 9% to $8,459,000 versus $7,792,000 during the fiscal year ended February 29, 2008, as a result of an increase in the demand for the Company’s products due to changes in defense spending on military programs the Company supports, as well as increased delivery requirements by its customers.

Bookings were greater than sales by approximately 6%; thus, the backlog increased from $5,826,000 as of February 29, 2008 to $6,304,000 as of February 28, 2009. The Company has experienced a decrease in the level of bookings of approximately 2% for the year ended February 28, 2009 as compared to the previous year primarily due to changes in military spending on programs the Company supports.

During the year ended February 28, 2009, the Company shipped 294,919 units as compared with 790,386 units shipped during the year ended February 29, 2008. It should be noted that since the Company manufactures a wide variety of products with an average sales price ranging from less than one dollar to several hundred dollars, such periodic variations in the Company’s volume of units shipped might not be a reliable indicator of the Company’s performance.

Cost of sales for the fiscal year ended February 28, 2009 increased to $6,338,000 from $5,893,000 for the fiscal year ended February 29, 2008. Expressed as a percentage of sales, cost of sales decreased from approximately 76% for the fiscal year ended February 29, 2008 to approximately 75% for the fiscal year ended February 28, 2009. This decrease as a percentage of sales was principally as a result of lower indirect labor and manufacturing overhead costs.

During the year ended February 28, 2009, the Company’s gross profit was $2,121,000 (25% margin) as compared to $1,899,000 (24% margin) for the year ended February 29, 2008. The gross profit increase was due principally to lower indirect labor and manufacturing overhead costs.

During the year ended February 28, 2009, selling, general and administrative based expenses, as a percentage of sales, were approximately 14% as compared with 15% for the year ended February 29, 2008. Selling, general and administrative expenses increased approximately 4% to $1,191,000 for the fiscal year ended February 28, 2009 from $1,149,000 for the fiscal year ended February 29, 2008. This increase is primarily the result of an increase in sales wages and sales travel.

Operating income for the fiscal year ended February 28, 2009 was $930,000 as compared to an operating income of $750,000 for the fiscal year ended February 29, 2008. This increase was primarily attributable to higher sales.

Interest income for the fiscal year ended February 28, 2009 decreased to $64,000 from $162,000 during the fiscal year ended February 29, 2008. This decrease was attributable to lower interest rates earned on cash and cash equivalents.

Accrued environmental expenses for the fiscal year ended February 28, 2009 increased to $15,000 from $0 for the fiscal year ended February 29, 2008. This increase was due to a greater amount due to USEPA under the Company’s Ability to Pay Multi-Site Settlement Agreement with USEPA dated February 4, 2006 as described earlier under “Business – Environmental Liabilities”.

Net income for the fiscal year ended February 28, 2009 was $969,000 as compared to net income of $925,000 for the fiscal year ended February 29, 2008. This increase is attributable an increase in sales and to decreases in indirect labor and manufacturing overhead costs.

LIQUIDITY AND CAPITAL RESOURCES

Subject to the following discussion, the Company expects its sole source of liquidity over the next twelve months to be cash from operations. However, due to the level of current backlog and level of new order intake, the Company might operate at a loss during part of the next fiscal year. The Company anticipates that its capital expenditures required to sustain operations will be approximately $200,000 for the next fiscal year and will be funded from operations.

Based upon (i) management’s best information as to current national defense priorities, future defense programs, as well as management’s expectations as to future defense spending, (ii) the market trends signaling a steady level of bookings, but with an increase in the cost of raw materials and operations that will result in the potential erosion of profit levels and continued price pressures due to intense competition, and (iii) the continued competition in the defense and aerospace market, the Company believes that it will have sufficient cash on hand to satisfy its operating needs over the next 12 months. However, due to the level of current backlog and new order intake (due to the status of the general economy and the shift to Commercial Off –The-Shelf (COTS) by the defense industry), the Company might operate at a loss during part of the next fiscal year. Thus, based on these factors and at the current level of bookings, costs of raw materials and services, profit margins and sales levels, the Company may not generate sufficient cash to satisfy its operating needs and its obligations to pre-bankruptcy creditors in accordance with the Plan. Thus, the Company is in continuous negotiations with all claim holders to reschedule these payments. In the event the Company is unable to restructure its obligations to pre-bankruptcy creditors or the slowdown in the intake of new orders continue, the Company has a contingency plan to further reduce its size and thereby reduce its cost of operations within certain limitations. Over the long-term, the Company believes that if the volume and prices of product sales remain as presently anticipated, the Company will generate sufficient cash from operations to sustain operations and pay pre-bankruptcy creditor obligations at the current reduced level of payments. In the event that bookings in the long-term decline significantly below the level experienced during the previous two fiscal years, the Company may be required to implement cost-cutting or other downsizing measures to continue its business operations. Such cost-cutting measures could inhibit future growth prospects. In appropriate situations, the Company may seek strategic alliances, joint ventures with others or acquisitions in order to maximize marketing potential and utilization of existing resources and provide further opportunities for growth.

The Company is continuing to negotiate with the unsecured creditors in an attempt to arrive at reduced payment schedules. To date, these parties have not expressed objection to the current reduced level of payments. However, no assurance can be made that the Company can reach a suitable agreement with the unsecured creditors, or obtain additional sources of capital and/or cash or that the Company can generate sufficient cash to meet its obligations.

At February 28, 2009 and February 29, 2008 respectively, the Company had cash and cash equivalents of $440,000 and $75,000. The cash increase was primarily due to positive net cash flow from operations.

At February 28, 2009, the Company had working capital of $6,972,000 as compared with a working capital at February 29, 2008 of $6,016,000. The increase was due to an increase in cash and equivalents.

See “Environmental Liabilities”, “Bankruptcy Proceedings” and “Properties” in Part I, Items 1 and 2, for more information.

OFF-BALANCE SHEET ARRANGEMENTS

The Company has not engaged in any off-balance sheet arrangements.

BOOKINGS AND BACKLOG

During the fiscal year ended February 28, 2009, the Company’s net bookings were $8,932,000 in new orders as compared with $9,135,000 for the year ended February 29, 2008, reflecting a decrease of approximately 2%. The Company’s backlog increased to $6,304,000 at February 28, 2009 as compared with $5,826,000 as of February 29, 2008, reflecting an 8% increase. In the event that bookings in the long-term decline significantly below the level experienced in the period ended February 28, 2009, the Company may be required to implement additional cost-cutting and other downsizing measures to continue its business operations. Such cost-cutting measures could inhibit future growth prospects and current productivity.

See Part I, Item 1, “Business – Marketing and Customers”.

FUTURE PLANS

The Company also plans to continue its efforts in selling commercial semiconductors and power modules and to develop appropriate strategic alliance arrangements. If these plans are successful, the Company intends to aggressively pursue sales of these products which could require the Company to invest in the building up of inventories of finished goods and invest in capital (automatic assembly and test) equipment. The source of capital funding will be defined subsequent to such strategic partnership being formed. Such financing could come from equipment leasing, among other financing alternatives.

Despite its intentions, the Company cannot assure you that these plans will be successful in easing liquidity problems, reducing costs or improving sales.

INFLATION

The rate of inflation has not had a material effect on the Company’s revenues and costs and expenses, and it is not anticipated that inflation will have a material effect on the Company in the near future. However, sharp increases in the cost of precious metals has had an adverse impact on the Company’s cost of raw materials.

SEASONALITY

The Company’s bookings of new orders and sales are largely dependent on congressional budgeting and appropriation activities and the cycles associated therewith. The Company has historically experienced a decreased level of bookings during the summer months as a result of a slowdown in the level of budgeting and appropriation activities.

FORWARD-LOOKING STATEMENTS

Some of the statements in this Annual Report on Form 10-K are "forward-looking statements," as that term is defined in the Private Securities Litigation Reform Act of 1995. These forward-looking statements include statements regarding our business, financial condition, results of operations, strategies or prospects. You can identify forward-looking statements by the fact that these statements do not relate strictly to historical or current matters. Rather, forward-looking statements relate to anticipated or expected events, activities, trends or results. Because forward-looking statements relate to matters that have not yet occurred, these statements are inherently subject to risks and uncertainties. Many factors could cause our actual activities or results to differ materially from the activities and results anticipated in forward-looking statements. These factors include those described under the caption "Risk Factors" in this Annual Report on Form 10-K, including those identified below. We do not undertake any obligation to update forward-looking statements.

Some of the factors that may impact our business, financial condition, results of operations, strategies or prospects include:

Our complex manufacturing processes may lower yields and reduce our revenues.

Our business could be materially and adversely affected if we are unable to obtain qualified supplies of raw materials and parts on a timely basis and at a cost-effective price.