Skip to main content

CORRECTING and REPLACING Standex Reports Third Quarter 2019 Financial Results

In the Consolidated Statement of Operations table, the Diluted Earnings Per Share - Total should read $2.09, instead of $1.09.

The corrected release reads:

STANDEX REPORTS THIRD QUARTER 2019 FINANCIAL RESULTS

Continued Strength in Engineering, Hydraulics and Scientific

Strong cash flow from working capital improvements

Acquisition of GS Engineering provides cutting-edge technology in fast growing segment

Successful divestiture of Cooking Solutions Group continues progress on portfolio strategy

Standex International Corporation (NYSE:SXI) today reported financial results for the its third quarter of fiscal year 2019 ending March 31, 2019.

Summary Financial Results - Total Standex
($M except EPS and Dividends)

3Q19

3Q18

Change
Net Sales $193.8 $192.1 0.8%
Operating Income $15.0 $18.8 -20.0%
Net Income from Continuing Ops $7.3 $11.8 -38.2%
EBITDA $22.3 $24.6 -9.1%
EBITDA margin 11.5% 12.8% -130 bps
Adjusted EBITDA $23.7 $26.9 -11.9%
Adjusted EBITDA margin 12.2% 14.0% -180 bps
Diluted EPS $0.58 $0.92 -37.0%
Adjusted EPS 0.65 1.01 -35.6%
Dividends per share 0.20 0.18 11%
3Q Free Cash Flow $9.5 $(3.5) NM
Pro Forma Net Debt to EBITDA 1.1x 1.8x -38.6%

Third-Quarter Fiscal 2019 Results

“Although we were disappointed with the results in the quarter, we made continued progress in our long-term strategy of building larger and more profitable business units,” commented President and Chief Executive Officer David Dunbar. “We moved the mix of our businesses further towards profitable growth platforms with solid laneway growth, today’s GS acquisition announcement and the successful divestiture of the cooking business. Operationally, process improvements to cash management delivered improved cash flows throughout the corporation. I am pleased to see the investments in Engineering Technologies are paying off as new generation aircraft ramps take place. Finally, our Scientific and Hydraulic businesses posted strong quarters. To address the shortfalls in certain businesses, we are aggressively implementing pricing, cost containment and productivity actions to position these businesses for the future.

“We have also strengthened our balance sheet and financial flexibility. We successfully completed the divesture of our Cooking Solutions unit for $105 million within our stated timeframe and price range. Additionally, we expect free cash flow to continue to build for the balance of the fiscal year as we benefit from improvements in working capital management. As a result, we are in an excellent position to continue to invest in businesses with solid long-term growth prospects.

“Our overall sales increased slightly as we continue to feel the impact of softness in refrigeration, macro-economic headwinds in electronics and the timing of customer rollouts in engraving programs. While we expect these factors to continue for the remainder of the fiscal year, we are confident that we are taking the right actions to transform Standex into a world-class operating company,” said Mr. Dunbar.

Restructuring Actions

In response to the temporary slowdown in certain businesses, the Company has launched initiatives to optimize production and enhance performance. These initial plans are expected to save approximately $3.8 million on an annual basis upon completion in 2Q20.

In the third quarter, Standex incurred $0.5 million of restructuring expenses, primarily related to headcount reductions in the Electronics and Engraving segments and the start of facility rationalization within the Engraving Group. For the fourth fiscal quarter, it is anticipated that approximately $0.8 million of additional restructuring charges will be incurred. For fiscal 2020, Standex now expects an additional $2.8 million in restructuring charges.

Outlook

“While we continue to have challenges in some of our end markets, the contributions from our growth laneways and new product offerings with attractive margin profiles are increasing. Additionally, we are implementing several initiatives throughout the organization to strengthen our operations and performance. We expect our fiscal fourth quarter will be sequentially stronger than the third, but below last year’s fourth quarter. Looking ahead to fiscal year 2020, we expect that performance will improve as we benefit from scheduled platform rollouts in the automotive OEM market, continued strength in the Engineering and Hydraulics segments and segment-level productivity programs we are currently implementing,” concluded Mr. Dunbar.

Third Quarter Segment Operating Performance

Engraving (19% of sales; 20% of segment operating income)

Engraving ($000’s)

3Q19

3Q18

% Change

Net sales $37,135 $33,749

10.0%

Operating Income 4,485 7,195 (37.7%)
Operating Margin 12.1% 21.3%

The 10.0% increase in sales was primarily due to new product offerings which grew by 39%, as well as the addition of sales from the acquisition of Tenibac. These were offset to a large extent by a decline in traditional sales, primarily to the automotive sector. Operating income decreased by $2.7 million year-on-year due to geographic mix, particularly from lower North American auto roll-outs and integration expenses associated with the Tenibac acquisition.

The Company currently expects that the fourth fiscal quarter will grow sequentially and ramp up more sharply in its fiscal 2020. The Engraving business has initiated restructuring efforts including the reorganization of its largest North American facilities into centers of excellence focused on specific technologies. Creation of these centers of excellence should result in $1 million in annual savings and strengthen readiness for the expected ramp in customer automotive product launches in fiscal year 2020. Additionally, on a global basis, Standex will be converting several smaller Engraving production sites into sales offices as certain locations are no longer strategic to supporting OEM tool makers. The Company expects to realize $2.0 million in savings from these efforts.

The Company expects demand in both the automotive and non-automotive markets to rebound beginning in the first fiscal quarter of 2020 as there are a number of scheduled new product launches by customers which should lead to increased sales in all regions.

Electronics (26% of sales; 42% of segment operating income)

Electronics ($000’s)

3Q19

3Q18

% Change

Net sales $50,197 $51,213 (2.0%)
Operating Income 9,418 11,221 (16.1%)
Operating Margin 18.8% 21.9%

The 2.0% decline in sales was primarily due to lower demand in the global automotive market partially offset by strong growth in industrial markets, new product sales and the Agile acquisition. Operating income for the period decreased by 16.1% from the third quarter of fiscal 2018 as a result of product mix and increased expenses, primarily materials cost and wage inflation, partially offset by operating efficiency initiatives. During the quarter, the Electronics business began limited production in its new India facility which should begin to ramp in the fourth fiscal quarter of 2019.

The Company currently expects sales for the calendar year will remain at levels similar to those in the fiscal third quarter. As a result, Standex has initiated efforts focused on G&A expense reduction as well as actions targeting increased productivity and reduced material spend.

Engineering Technologies (14% of sales; 12% of segment operating income)

Engineering ($000’s)

3Q19

3Q18

% Change

Net sales $27,467 $23,426 17.3%
Operating Income 2,800 1,155 142.4%
Operating Margin 10.2% 4.9%

Engineering Technologies revenue grew 17.3% over 3Q18 due largely to strength in the Energy, Defense and Aviation markets. The company’s long-term investments to support new aviation platforms is paying off as these platforms ramp to full production volume. Operating income more than doubled as a result of higher sales volume, associated operating leverage and continued improvements in manufacturing processes.

In the fourth quarter, Standex expects to continue to benefit from increased demand in the Aviation, Space, and Defense markets. Operating income is expected to increase as a result of this volume increase as well as continued productivity improvement efforts.

Hydraulics (8% of sales; 10% of segment operating income)

Hydraulics ($000’s)

3Q19

3Q18

% Change

Net sales $15,106 $12,878 17.3%
Operating Income 2,242 1,749 28.2%
Operating Margin 14.8% 13.6%

Sales for the Hydraulics segment increased 17.3% year-over-year primarily reflecting strong OEM demand in the North American refuse market for the Company’s highly differentiated and new product offerings. Income from operations gained 28.2% year-over-year due to higher sales partially offset by material cost increases due to tariffs on components purchased from China.

The Company expects end market demand to remain positive due to ongoing strong demand from construction and infrastructure projects.

Food Service Equipment (33% of sales; 16% of segment operating income)

Food Service ($000’s)

3Q19

3Q18

% Change

Net sales $63,866 $70,881 (9.9%)
Operating Income 3,559 5,546 (35.8%)
Operating Margin 5.6% 7.8%

The 9.9% decline in sales and 35.8% decrease in operating income reflected continued softness in Refrigeration, particularly in the retail channel, partially offset by double-digit growth in Scientific due to new product launches.

Standex expects a sequential, seasonal revenue increase in the next quarter but with continued weakness in Refrigeration. In addition, the Company continues to pursue productivity improvements to address the current market conditions. The Company is also actively pursuing new Refrigeration business opportunities as well as continuing to promote its new Scientific, pump and display merchandizer product offerings.

Capital Allocation

  • GS Engineering Acquisition: Today, Standex announced the acquisition of privately-held Genius Solutions Engineering Company (d/b/a GS Engineering) and affiliated GS Innovation, Inc. for $30 million in cash and a five-year earnout. GS is a market leader in the manufacture of highly specialized “soft touch” skin texturized tooling, primarily serving the automotive end market. The acquisition is expected to be immediately accretive to earnings, excluding purchase accounting adjustments.
  • Capital Expenditures: Standex’s capital expenditures are projected to be between $35 million to $36 million in fiscal 2019. The Company has spent approximately $18 million year-to-date.
  • Dividends: On April 24, the Company declared a quarterly cash dividend of $0.20 per share, which is payable May 24, 2019 to shareholders of record May 10, 2019.

Balance Sheet and Cash Flow Highlights

  • Net Debt: Standex ended 3Q19 with net debt of $195.7 million, compared with $197.8 million last quarter. This consisted primarily of long-term debt of $291.7 million and cash and equivalents of $96 million of which $78.5 million was held by foreign subsidiaries. Year to date Standex has repatriated $43.2 million and expects to repatriate $50 million in total by the end of FY19 from foreign subsidiaries. On April 1st, the Company received proceeds from the sale of the Cooking Solutions Group and used the proceeds to repay $100 million in long term debt. After this collection and repayment, the Company’s net debt was $90.6 million, and its pro forma net debt to EBITA leverage ratio was 1.1.
  • Cash Flow: Net cash provided by continuing operating activities for the three months ended March 31, 2019 was $13.3 million compared to net cash provided by continuing operating activities of $2.0 million in the prior year. The increase in cash provided by operating activities was partially a result of decreases in accounts receivable due to focused collection efforts and our “plan for every part” initiative which resulted in improved inventory turns.

Capital expenditures were approximately $3.8 million compared to $5.5 million in 3Q18. As a result, the Company generated free cash flow of $9.5 million compared to negative free cash flow of $3.5 million in 3Q18.

Conference Call Details

Standex will host a conference call for investors tomorrow, April 30, 2019 at 8:30 a.m. ET. On the call, David Dunbar, President and CEO, and Thomas DeByle, CFO, will review the Company’s financial results and business and operating highlights. Investors interested in listening to the webcast and viewing the slide presentation should log on to the “Investors” section of Standex’s website under the subheading, “Events and Presentations”, located at www.standex.com.

A replay of the webcast will also be available on the Company’s website shortly after the conclusion of the presentation through May 14, 2019. To listen to the playback, please dial (800) 585-8367 in the U.S. or (404) 537-3406 internationally; the passcode is 7555618. The webcast replay also can be accessed in the “Investor Relations” section of the Company’s website, located at www.standex.com.

Use of Non-GAAP Financial Measures

In addition to the financial measures prepared in accordance with generally accepted accounting principles (“GAAP”), the Company uses certain non-GAAP financial measures, including non-GAAP income from operations, non-GAAP net income from continuing operations, free operating cash flow, EBITDA (earnings before interest, taxes, depreciation and amortization) and adjusted earnings per share. The attached financial tables reconcile non-GAAP measures used in this press release to the most directly comparable GAAP measures. The Company believes that the use of non-GAAP measures including the impact of restructuring charges, purchase accounting, discrete tax events, and acquisition costs help investors to obtain a better understanding of our operating results and prospects, consistent with how management measures and forecasts the Company's performance, especially when comparing such results to previous periods. An understanding of the impact in a particular quarter of specific restructuring costs, acquisition expenses, or other gains and losses, on net income (absolute as well as on a per-share basis), operating income or EBITDA can give management and investors additional insight into core financial performance, especially when compared to quarters in which such items had a greater or lesser effect, or no effect. Non-GAAP measures should be considered in addition to, and not as a replacement for, the corresponding GAAP measures, and may not be comparable to similarly titled measures reported by other companies.

About Standex

Standex International Corporation is a multi-industry manufacturer in five broad business segments: Engraving, Electronics, Engineering Technologies, Hydraulics, and Food Service Equipment with operations in the United States, Europe, Canada, Japan, Australia, Singapore, Mexico, Brazil, Argentina, Turkey, South Africa, India and China. For additional information, visit the Company's website at http://standex.com/.

Standex International Corporation

Consolidated Statement of Operations

(Unaudited)
Three Months EndedNine Months Ended
March 31,March 31,
(In thousands, except share data) 2019201820192018
Net sales $ 193,771 $ 192,147 $ 582,380 $ 566,982
Cost of sales 131,981 126,035 384,402 371,882
Gross profit 61,790 66,112 197,978 195,100
Selling, general and administrative expenses 45,390 44,979 136,555 131,830
Restructuring costs 549 1,060 1,173 5,792
Acquisition related costs 805 1,254 2,352 2,962
Income from operations 15,046 18,819 57,898 54,516
Interest expense 3,230 2,286 8,598 5,800
Other (income) expense, net 679 1,014 1,694 1,350
Total 3,909 3,300 10,292 7,150
Income from continuing operations before income taxes 11,137 15,519 47,606 47,366
Provision for income taxes 3,833 3,696 13,535 27,312
Net income (loss) from continuing operations 7,304 11,823 34,071 20,054
Income (loss) from discontinued operations, net of tax 18,965 977 21,450 3,940
Net income (loss) $ 26,269 $ 12,800 $ 55,521 $ 23,994
Basic earnings per share:
Income (loss) from continuing operations $ 0.58 $ 0.93 $ 2.70 $ 1.58
Income (loss) from discontinued operations 1.51 0.08 1.70 0.31
Total $ 2.09 $ 1.01 $ 4.40 $ 1.89
Diluted earnings per share:
Income (loss) from continuing operations $ 0.58 $ 0.92 $ 2.69 $ 1.57
Income (loss) from discontinued operations 1.51 0.08 1.69 0.31
Total $

2.09

$ 1.00 $ 4.38 1.88
Average Shares Outstanding
Basic 12,530 12,709 12,626 12,695
Diluted 12,574 12,797 12,687 12,784
Standex International Corporation
Condensed Consolidated Balance Sheets
(Unaudited)
March 31,June 30,
(In thousands) 20192018
ASSETS
Current assets:
Cash and cash equivalents $ 96,041 $ 109,602
Accounts receivable, net 115,782 119,783
Inventories 103,383 104,300
Prepaid expenses and other current assets 27,115 10,255
Income taxes receivable 3,320 2,348
Current assets- Discontinued Operations 106,863 37,671
Total current assets 452,504 383,959
Property, plant, equipment, net 139,432 136,934
Intangible assets, net 111,505 84,938
Goodwill 260,443 211,751
Deferred tax asset 9,645 7,447
Other non-current assets 29,812 29,749
Long-term Assets- Discontinued Operations - 62,159
Total non-current assets 550,837 532,978
Total assets $ 1,003,341 $ 916,937
LIABILITIES AND STOCKHOLDERS' EQUITY
Current liabilities:
Accounts payable $ 61,358 $ 78,947
Accrued liabilities 61,147 57,679
Income taxes payable 4,762 6,050
Current liabilities- Discontinued Operations 2,561 18,665
Total current liabilities 129,828 161,341
Long-term debt 291,725 193,772
Accrued pension and other non-current liabilities 102,171 110,979
Non-current liabilities- Discontinued Operations - 50
Total non-current liabilities 393,896 304,801
Stockholders' equity:
Common stock 41,976 41,976
Additional paid-in capital 63,774 61,328
Retained earnings 808,417 761,430
Accumulated other comprehensive loss (124,417) (121,859)
Treasury shares (310,133) (292,080)
Total stockholders' equity 479,617 450,795
Total liabilities and stockholders' equity $ 1,003,341 $ 916,937
Standex International Corporation and Subsidiaries
Statements of Consolidated Cash Flows
(Unaudited)
Nine Months Ended
March 31,
(In thousands) 20192018
Cash Flows from Operating Activities
Net income $ 55,521 $ 23,994
Income (loss) from discontinued operations 21,450 3,940
Income from continuing operations 34,071 20,054
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation and amortization 22,794 19,632
Stock-based compensation 2,680 3,775
Non-cash portion of restructuring charge (81) (1,187)
Contributions to defined benefit plans (751) (808)
Net changes in operating assets and liabilities (33,753) (14,576)
Net cash provided by operating activities - continuing operations 24,960 26,890
Net cash (used in) operating activities - discontinued operations 617 1,829
Net cash provided by operating activities 25,577 28,719
Cash Flows from Investing Activities
Expenditures for property, plant and equipment (17,844) (20,207)
Expenditures for acquisitions, net of cash acquired (96,768) (10,397)
Proceeds from life insurance policies - 2,217
Other investing activities 2,521 1,552
Net cash (used in) investing activities from continuing operations (112,091) (26,835)
Net cash provided by (used in) investing activities from discontinued operations 2,925 (1,184)
Net cash (used in) investing activities (109,166) (28,019)
Cash Flows from Financing Activities
Proceeds from borrowings 206,650 134,500
Payments of debt (107,650) (124,788)
Contingent consideration payment (910) -
Activity under share-based payment plans 952 774
Purchase of treasury stock (19,239) (2,007)
Cash dividends paid (7,331) (6,600)
Net cash provided by financing activities 72,472 1,879
Effect of exchange rate changes on cash (2,444) 5,179
Net changes in cash and cash equivalents (13,561) 7,758
Cash and cash equivalents at beginning of year 109,602 88,566
Cash and cash equivalents at end of period $ 96,041 $ 96,324
Standex International Corporation
Selected Segment Data
(Unaudited)
Three Months EndedNine Months Ended
March 31,March 31,
(In thousands) 2019201820192018

Net Sales

Engraving 37,135 33,749 111,602 100,457
Electronics 50,197 51,213 154,347 144,082
Engineering Technologies 27,467 23,426 71,818 65,621
Hydraulics 15,106 12,878 39,758 34,969
Food Service Equipment $ 63,866 $ 70,881 $ 204,855 $ 221,853
Total $ 193,771 $ 192,147 $ 582,380 $ 566,982

Income from operations

Engraving 4,485 7,195 18,883 21,735
Electronics 9,418 11,221 32,581 31,774
Engineering Technologies 2,800 1,155 6,636 3,879
Hydraulics 2,242 1,749 5,753 5,138
Food Service Equipment $ 3,559 $ 5,546 $ 15,417 $ 19,834
Restructuring (549) (1,060) (1,173) (5,792)
Acquisition related costs (805) (1,254) (2,352) (2,962)
Corporate (6,104) (5,733) (17,847) (19,090)
Total $ 15,046 $ 18,819 $ 57,898 $ 54,516

Standex International Corporation

Reconciliation of GAAP to Non-GAAP Financial Measures
(Unaudited)
Three Months EndedNine Months Ended
March 31,March 31,
(In thousands, except percentages) 20192018% Change

20192018% Change
Adjusted income from operations and adjusted net income from continuing operations:
Net Sales $ 193,771 $ 192,147 0.8% $ 582,380 $ 566,982

2.7%

Income from operations, as reported $ 15,046 $ 18,819 -20.0% $ 57,898 $ 54,516

6.2%

Income from operations margin 7.8% 9.8% 9.9% 9.6%
Adjustments:
Restructuring charges 549 1,060 1,173 5,792
Acquisition-related costs 805 1,254 2,352 2,962
Purchase accounting - - 511 204
Adjusted income from operations $ 16,400 $ 21,133 -22.4% $ 61,934 $ 63,474 -2.4%
Adjusted income from operations margin 8.5% 11.0% 10.6% 11.2%
Interest and other income (expense), net (3,909) (3,300) (10,292) (7,150)
Provision for income taxes (3,833) (3,696) (13,535) (27,312)
Discrete and other tax items - (456) (779) 14,559
Tax impact of above adjustments (417) (604) (1,243) (2,338)
Net income from continuing operations, as adjusted

$

8,241 $ 13,077 -37.0% $ 36,085 $ 41,233 -12.5%

EBITDA and Adjusted EBITDA:

Net income from continuing operations, as reported $ 7,304 $ 11,823 $ 34,071 $ 20,054
Net income from continuing operations margin 3.8% 6.2% 5.9% 3.5%
Add back:
Provision for Income Taxes 3,833 3,696 13,535 27,312
Interest expense 3,230 2,286 8,598 5,800
Depreciation and amortization 7,977 6,788 22,794 19,632
EBITDA $ 22,344 $ 24,593 -9.1% $ 78,998 $ 72,798 8.5%
EBITDA Margin 11.5% 12.8% 13.6% 12.8%
Adjustments:
Restructuring charges 549 1,060 1,173 5,792
Acquisition-related costs 805 1,254 2,352 2,962
Purchase accounting - - 511 204
Adjusted EBITDA $ 23,698 $ 26,907 -11.9% $ 83,034 $ 81,756 1.6%
Adjusted EBITDA Margin 12.2% 14.0% 14.3% 14.4%

Free operating cash flow:

Net cash provided by operating activities - continuing operations, as reported $ 13,253 $ 1,983 $ 24,960 $ 26,890
Less: Capital expenditures (3,795) (5,483) (17,844) (20,207)
Free operating cash flow $ 9,458 $ (3,500) $ 7,116 $ 6,683
Net income from continuing operations 7,304 11,823 34,071 20,054
Discrete tax item - tax on foreign cash - (456) (779) 14,559
Adjusted net income 7,304 11,367 33,292 34,613
Conversion of free operating cash flow 129.5% NM 21.4% 19.3%

Standex International Corporation

Reconciliation of GAAP to Non-GAAP Financial Measures
(Unaudited)
Three Months EndedNine Months Ended
March 31,March 31,

Adjusted earnings per share
from continuing operations

20192018

%

Change

20192018

%

Change

Diluted earnings per share from continuing operations, as reported$ 0.58 $ 0.92 -37.0% $ 2.69 $ 1.57 71.3%
Adjustments:
Restructuring charges 0.03 0.06 0.06 0.33
Acquisition-related costs 0.04 0.07 0.13 0.17
Discrete Tax Items - (0.04) (0.06) 1.14
Purchase accounting expenses - - 0.03 0.01
Diluted earnings per share from continuing operations, as adjusted$ 0.65 $ 1.01 -35.6% $ 2.85 $ 3.22 -11.5%

Contacts:

Thomas DeByle, CFO
(603) 893-9701
e-mail : InvestorRelations@Standex.com

Data & News supplied by www.cloudquote.io
Stock quotes supplied by Barchart
Quotes delayed at least 20 minutes.
By accessing this page, you agree to the following
Privacy Policy and Terms and Conditions.