Edgar Filing: MICRON TECHNOLOGY INC

2014 Q4

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K



(Mark One)
x	ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended August 28, 2014



o	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to

Commission file number 1-10658

Micron Technology, Inc.

(Exact name of registrant as specified in its charter)



Delaware	75-1618004
(State or other jurisdiction of incorporation or organization)	(IRS Employer Identification No.)
8000 S. Federal Way, Boise, Idaho	83716-9632
(Address of principal executive offices)	(Zip Code)
Registrant's telephone number, including area code	(208) 368-4000
Securities registered pursuant to Section 12(b) of the Act:
Title of each class	Name of each exchange on which registered
Common Stock, par value $.10 per share	NASDAQ Global Select Market

Securities registered pursuant to Section 12(g) of the Act:

None

(Title of Class)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes T No ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ¨ No T

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes T No ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes T No ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. T

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act:



Large Accelerated Filer x	Accelerated Filer o	Non-Accelerated Filer o (Do not check if a smaller reporting company)	Smaller Reporting Company o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No x

The aggregate market value of the voting stock held by non-affiliates of the registrant, based upon the closing price of such stock on February 27, 2014, as reported by the NASDAQ Global Select Market, was approximately $21.3 billion. Shares of common stock held by each executive officer and director and by each person who owns 5% or more of the outstanding common stock have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

The number of outstanding shares of the registrant's common stock as of October 16, 2014, was 1,073,455,204.

DOCUMENTS INCORPORATED BY REFERENCE: Portions of the Proxy Statement for the registrant’s Fiscal 2014 Annual Meeting of Shareholders to be held on January 22, 2015, are incorporated by reference into Part III of this Annual Report on Form 10-K.

Definitions of Commonly Used Terms

As used herein, "we," "our," "us" and similar terms include Micron Technology, Inc. and its subsidiaries, unless the context indicates otherwise. Abbreviations, terms or acronyms are commonly used or found in multiple locations throughout this report and include the following:



Term	Definition	Term	Definition
2019 Notes	1.258% Secured Senior Notes due 2019	MAI	Micron Akita, Inc.
2022 Notes	5.875% Senior Notes due 2022	Mb	Megabit
2025 Notes	5.500% Senior Notes due 2025	Micron	Micron Technology, Inc.
2031 Notes	The 2031A and 2031B Notes	MIT	Micron Technology, Italia, S.r.l.
2031A Notes	1.500% Convertible Senior Notes due 2031	MLC	Multi-Level Cell
2031B Notes	1.875% Convertible Senior Notes due 2031	MMJ	Micron Memory Japan, Inc.
2032 Notes	The 2032C and 2032D Notes	MMJ Companies	Micron Akita, Inc. and Micron Memory Japan, Inc.
2032C Notes	2.375% Convertible Senior Notes due 2032	MMJ Group	MMJ and its subsidiaries
2032D Notes	3.125% Convertible Senior Notes due 2032	MMT	Micron Memory Taiwan Co., Ltd.
2033 Notes	The 2033E and 2033F Notes	MP Mask	MP Mask Technology Center, LLC
2033E Notes	1.625% Convertible Senior Notes due 2033	MTI	Micron Technology, Inc.
2033F Notes	2.125% Convertible Senior Notes due 2033	Nanya	Nanya Technology Corporation
2043G Notes	3.00% Convertible Senior Notes due 2043	Numonyx	Numonyx Holdings B.V.
Aptina	Aptina Imaging Corporation	Photronics	Photronics, Inc.
DRAM	Dynamic Random Access Memory	PSRAM	Pseudo-static Dynamic Random Access Memory
Elpida	Elpida Memory, Inc.	Qimonda	Qimonda AG
Gb	1 gigabit	R&D	Research and Development
GB	1 gigabyte	Rexchip	Rexchip Electronics Corporation
HP	Hewlett-Packard Company	RLDRAM	Reduced Latency Dynamic Random Access Memory
IM Flash	IMFT and IMFS	SEC	Securities and Exchange Commission
IMFS	IM Flash Singapore, LLP	SG&A	Selling, General and Administration
IMFT	IM Flash Technologies, LLC	SLC	Single-Level Cell
Inotera	Inotera Memories, Inc.	SSD	Solid-State Drive
Intel	Intel Corporation	ST	STMicroelectronics S.r.l.
Japan Court	Tokyo District Court	Tera Probe	Tera Probe, Inc.
LIBOR	London Interbank Offered Rate	TLC	Triple-Level Cell
LPDRAM	Mobile Low Power Dynamic Random Access Memory	VIE	Variable Interest Entity

PART I

ITEM 1. BUSINESS

The following discussion contains trend information and other forward-looking statements that involve a number of risks and uncertainties. Forward-looking statements include, but are not limited to, statements such as those made in "Products" regarding increased sales of DDR4 products, growth in demand for NAND Flash products and SSDs and in "Manufacturing" regarding the transition to smaller line-width process technologies and 3D NAND Flash. Our actual results could differ materially from our historical results and those discussed in the forward-looking statements. Factors that could cause actual results to differ materially include, but are not limited to, those identified in "Item 1A. Risk Factors." All period references are to our fiscal periods unless otherwise indicated.

Corporate Information

Micron, a Delaware corporation, was incorporated in 1978. Our executive offices are located at 8000 South Federal Way, Boise, Idaho 83716-9632 and our telephone number is (208) 368-4000. Information about us is available on the internet at www.micron.com. Copies of our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K, as well as any amendments to these reports, are available through our website as soon as reasonably practicable after they are electronically filed with or furnished to the SEC. Materials filed by us with the SEC are also available at the SEC’s Public Reference Room at 100 F Street, NE, Washington, D.C. 20549. Information on the operation of the Public Reference Room is available by calling (800) SEC-0330. Also available on our website are our: Corporate Governance Guidelines, Governance Committee Charter, Compensation Committee Charter, Audit Committee Charter and Code of Business Conduct and Ethics. Any amendments or waivers of our Code of Business Conduct and Ethics will also be posted on our website at www.micron.com within four business days of the amendment or waiver. Copies of these documents are available to shareholders upon request. Information contained or referenced on our website is not incorporated by reference and does not form a part of this Annual Report on Form 10-K.

Overview

We are one of the world's leading providers of advanced semiconductor solutions. Through our worldwide operations, we manufacture and market a full range of DRAM, NAND Flash and NOR Flash memory, as well as other innovative memory technologies, packaging solutions and semiconductor systems for use in leading-edge computing, consumer, networking, automotive, industrial, embedded and mobile products. We market our products through our internal sales force, independent sales representatives and distributors primarily to Original Equipment Manufacturers ("OEMs") and retailers located around the world. Our success is largely dependent on the market acceptance of our diversified portfolio of semiconductor products, efficient utilization of our manufacturing infrastructure, successful ongoing development of advanced product and process technologies and generating a return on R&D investments.

We obtain products for sale to our customers from our wholly-owned manufacturing facilities and our joint ventures. In recent years, we have increased our manufacturing scale and product diversity through strategic acquisitions and various partnering arrangements.

We make significant investments to develop the proprietary product and process technologies that are implemented in our worldwide manufacturing facilities and through our joint ventures. These investments enable our production of semiconductor products with increasing functionality and performance at lower costs. We generally reduce the manufacturing cost of each generation of product through advancements in product and process technologies, such as our leading-edge line-width process technology. We continue to introduce new generations of products that offer improved performance characteristics, such as higher data transfer rates, reduced package size, lower power consumption, improved read/ write reliability and increased memory density. To leverage our significant investments in R&D, we have formed, and may continue to form, strategic joint ventures that allow us to share the costs of developing memory product and process technologies with joint venture partners. In addition, from time to time, we also sell and/or license technology to other parties. We continue to pursue additional opportunities to monetize our investment in intellectual property through partnering and other arrangements.

On July 31, 2013, we completed the acquisition of Elpida, now known as MMJ, and a controlling interest in Rexchip, now known as MMT (together, the "MMJ Acquisition"). The MMJ Acquisition included a 300mm DRAM wafer fabrication facility located in Hiroshima, Japan, a 300mm DRAM wafer fabrication facility in Taichung City, Taiwan and an assembly and test facility located in Akita, Japan. These wafer fabrication facilities together represented approximately 30% of our total wafer capacity for 2014. The operations from the MMJ Acquisition, which are included primarily in our MBU and CNBU segments, include the manufacture of Mobile DRAM targeted to mobile phones and tablets and computing DRAM targeted to desktop PCs, servers, notebooks and workstations. In connection with the MMJ Acquisition, we recorded net assets of $2.60 billion, noncontrolling interests of $168 million and a gain on the transaction of $1.48 billion in 2013. (See "Part II – Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Micron Memory Japan, Inc." note.)

The MMJ Companies are currently subject to corporate reorganization proceedings under the Corporate Reorganization Act of Japan. Because the plans of reorganization of the MMJ Companies provide for ongoing payments to creditors following the MMJ Acquisition, these proceedings are continuing and the MMJ Companies remain subject to the oversight of the Japan Court and of the trustees appointed by the Japan Court (including a trustee designated by us, who we refer to as the business trustee, and a trustee designated by the Japan Court, who we refer to as the legal trustee), pending completion of the reorganization proceedings. As a result of this oversight and related consent rights of the Japan Court and the legal trustee, our ability to effectively integrate the MMJ Companies as part of our global operations or to cause the MMJ Companies to take certain actions that we deem advisable for their businesses could be adversely affected if the Japan Court or the legal trustee is unwilling to consent to various actions. For more information, see "Item 3. Legal Proceedings – Reorganization Proceedings of the MMJ Companies" and "Item 1A. Risk Factors."

Business Segments

In the third quarter of 2014, we reorganized our business units. All prior period amounts reflect this reorganization. Factors used to identify our segments include, among others, markets, customers and products. Segment information reported herein is consistent with how it is reviewed and evaluated by our chief operating decision makers. We have the following four business units, which are our reportable segments:

Compute and Networking Business Unit ("CNBU"): Includes DRAM and NOR Flash products sold to the compute, networking, graphics and cloud server markets.

Mobile Business Unit ("MBU"): Includes DRAM, NAND Flash and NOR Flash products sold to the smartphone, feature phone and tablet mobile-device market.

Storage Business Unit ("SBU"): Includes NAND Flash components and SSDs sold into enterprise and client storage, cloud and removable storage markets. SBU also includes NAND Flash products sold to Intel through our IMFT joint venture.

Embedded Business Unit ("EBU"): Includes DRAM, NAND Flash and NOR Flash products sold into automotive and industrial applications, as well as the connected home and consumer electronics markets.

For more information regarding our segments, see "Part II – Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Segment Information."

Products

DRAM

DRAM products are high-density, low-cost-per-bit, random access memory devices that provide high-speed data storage and retrieval with a variety of performance, pricing and other characteristics. Sales of DRAM products were 68%, 48% and 39% of our total net sales in 2014, 2013 and 2012, respectively. DRAM products are sold by CNBU, MBU and EBU.

DDR3 DRAM is a standardized, high-density, high-volume, DRAM product, which offers high speed and high bandwidth at a relatively low cost. DDR3 products are primarily targeted at computers, servers, networking devices and communications equipment. In 2014, we offered DDR3 products in 1Gb, 2Gb and 4Gb densities. We also offered next generation DDR4 DRAM products in 2014 and we expect sales of these products to increase significantly in 2015 as they replace DDR3 DRAM products in many applications. Sales of DDR3 DRAM products were 40%, 31% and 20% of our total net sales in 2014, 2013 and 2012, respectively.

LPDRAM products offer lower power consumption relative to other DRAM products and are used primarily in mobile phones, tablets, embedded applications, ultra-thin laptop computers and other mobile consumer devices that require low power consumption. We offer DDR4, DDR3, DDR2 and DDR versions of LPDRAM. Sales of mobile LPDRAM products were 20%, 6% and 3% of our total net sales in 2014, 2013 and 2012, respectively.

We also offer other DRAM products targeted to specialty markets including DDR2 DRAM, DDR DRAM, GDDR5 DRAM, SDRAM, RLDRAM and PSRAM. These products are used primarily in networking devices, servers, consumer electronics, communications equipment, computer peripherals, automotive and industrial applications as well as computer memory upgrades. In 2014, we began selling Hybrid Memory Cube ("HMC") products, which are semiconductor memory devices where vertical stacks of DRAM die that are connected using through-silicon-via interconnects are placed above a small, high-speed logic layer. HMC enables ultra-high system performance with significantly lower power-per-bit.

NAND Flash Memory

NAND Flash products are electrically re-writeable, non-volatile semiconductor memory devices that retain content when power is turned off. NAND Flash sales were 27%, 40% and 44% of our total net sales in 2014, 2013 and 2012, respectively. NAND Flash is ideal for mass-storage devices due to its fast erase and write times, high density and low cost per bit relative to other solid-state memories. Embedded NAND Flash-based storage devices are utilized in mobile phones, SSDs, tablets, computers, industrial and automotive applications, networking and other personal and consumer applications. Removable storage devices, such as USB and Flash memory cards, are used with applications such as PCs, digital still cameras and mobile phones. The market for NAND Flash products has grown rapidly and we expect it to continue to grow due to demand for these and other embedded and removable storage devices. NAND Flash products are sold by SBU, EBU, MBU and CNBU.

Our NAND Flash products feature a small cell structure that enables higher densities for demanding applications. We offer high-speed SLC, MLC and TLC NAND Flash products that are compatible with advanced interfaces. MLC and TLC products have two and three times, respectively, the bit density of SLC products. In 2014, we offered SLC NAND Flash products in 1Gb to 64Gb densities; 2-bit-per-cell MLC NAND Flash products in 8Gb to 128Gb densities; and 3-bit-per-cell TLC NAND Flash products in 64Gb to 128Gb densities.

We offer client and enterprise SSDs which feature higher performance, reduced-power consumption and enhanced reliability as compared to typical hard disk drives. Our client SSDs are targeted at notebooks, desktops, workstations and other consumer applications. Using our NAND Flash process technology and a leading-edge SATA 6 Gb per second interface, our SSDs deliver read and write speeds that help improve boot and application load times and deliver higher performance than hard disk drives. Our client SSDs feature industry-leading encryption for corporate users and are offered in a 2.5-inch, M.2. and mSATA modules, with densities up to 1 terabyte. Our enterprise SSDs are targeted at server and storage applications and incorporate our Extended Performance and Enhanced Reliability Technology (XPERT) architecture, which closely incorporates the storage and controller through highly optimized firmware algorithms and hardware enhancements. The end result is a set of market-focused enterprise features that deliver ultra-low latencies, improved data transfer time, power-loss protection and cost-effectiveness, along with higher capacities and power efficiency. We offer enterprise SSDs with capacities up to 1.4 terabytes. We expect that demand for both client and enterprise SSDs will continue to increase significantly over the next several years.

We also offer managed NAND Multi-Chip Package ("MCP") products, which incorporate our NAND Flash. Our managed NAND products include e-MMC, e-MCP and embedded USB. Our e-MMC products combine NAND Flash with a logic controller that performs media management and Error Code Correction ("ECC"), which provides reduced ECC complexity, better system performance, improved reliability, easy integration and lower overall system costs. Our e-MCP products combine e-MMC with LPDRAM on the same substrate, which improves overall functionality and performance while simplifying system design.

Through our Lexar® brand, we sell high-performance digital media products and other flash-based storage products through retail and OEM channels. Our digital media products include a variety of flash memory cards and JumpDrive™ products with a range of speeds, capacities and value-added features. We offer flash memory cards in a variety of speeds and capacities and in all major media formats, including CompactFlash, Memory Stick and Secure Digital ("SD"). CompactFlash and Memory Stick products sold by us incorporate our patented controller technology. Other products, including SD memory cards and some JumpDrive products, incorporate third party controllers. We also manufacture products that are sold under other brand names and resell flash memory products that are purchased from other NAND Flash suppliers.

NOR Flash Memory

NOR Flash products are electrically re-writeable, non-volatile semiconductor memory devices that retain content when power is turned off, offer fast read times due to random access capability and have execute-in-place ("XiP") capability that enables processors to read NOR Flash without first accessing RAM. These capabilities make NOR ideal for storing program code in wireless and embedded applications. Our NOR Flash sales were 3%, 9% and 12% of our total net sales for 2014, 2013 and 2012, respectively. NOR Flash products are sold primarily by EBU and CNBU.

We offer both parallel and serial interface NOR Flash products in a broad range of densities, packages and features. Our parallel NOR Flash products are constructed to meet the needs of the consumer electronics, industrial, wired and wireless communications, computing and automotive applications. These products offer high densities, XiP performance, architectural flexibility and proven reliability in rigorous industrial settings. Our serial NOR Flash products are designed to meet the needs of consumer electronics, industrial, automotive, wired and wireless communications and computing applications. These products offer industry-standard packaging, pinouts, command sets and chipset compatibility.

Partnering Arrangements

The following is a summary of our partnering arrangements as of August 28, 2014:



Entity		Member or Partner	Micron Ownership Interest	Formed/ Acquired	Product Market
Consolidated entities:
IMFT	(1)	Intel Corporation	51%	2006	NAND Flash
MP Mask	(2)	Photronics, Inc.	50%	2006	Photomasks

Equity method investments:
Inotera	(3)	Nanya Technology Corporation	33%	2009	DRAM
Tera Probe	(4)	Various	40%	2013	Wafer Probe

(1)

IMFT: We partner with Intel for the design, development and manufacture of NAND Flash and certain emerging memory products. In connection therewith, we formed a joint venture with Intel, IMFT, to manufacture NAND Flash memory products for the exclusive use of the members. The members share the output of IMFT generally in proportion to their investment. We sell NAND Flash products to Intel through IMFT at long-term negotiated prices approximating cost. We generally share product design and other research and development costs for NAND Flash and certain emerging memory technologies equally with Intel. The IMFT joint venture agreement extends through 2024 and includes certain buy-sell rights with an Intel put right, commencing in January 2015, and our call right commencing in January 2018, pursuant to which Intel may elect to sell to us, or we may elect to purchase from Intel, Intel's interest in IMFT. If Intel elects to sell to us, we would set the closing date of the transaction within two years following such election and could elect to receive financing of the purchase price from Intel for one to two years from the closing date. (See "Part II – Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Equity – Noncontrolling Interests in Subsidiaries – IMFT" note.)

(2)

MP Mask: We produce photomasks for leading-edge and advanced next generation semiconductors through MP Mask, a joint venture with Photronics. The MP Mask joint venture agreement allows either party to terminate the joint venture in either May 2016, provided notice is given prior to May 2015, or in each five-year successive period following May 2016, provided such notice is given at least twelve months prior to the end of the successive five-year period. We and Photronics also have supply arrangements wherein we purchase a substantial majority of the reticles produced by MP Mask. (See "Part II – Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Equity – Noncontrolling Interests in Subsidiaries – MP Mask" note.)

(3)

Inotera: We partner with Nanya for the manufacture of DRAM products. In connection therewith, we have partnered with Nanya in Inotera, a DRAM memory company in Taiwan. Through December 2012, we purchased 50% of Inotera's wafer production capacity based on a margin-sharing formula among Nanya, Inotera and us. Since January 2013, we have purchased substantially all of Inotera's DRAM output at a discount from market prices for our comparable components under a new supply agreement (the "Inotera Supply Agreement"). The Inotera Supply Agreement has a three-year term (currently through December 2016) that contemplates annual negotiations with respect to potential successive one-year extensions. If the parties do not agree to an extension, the agreement will terminate following the end of the then-existing term plus a subsequent three-year wind-down period. In the event of a wind-down, our share of Inotera's capacity would decline over the wind-down period. We are currently in negotiations regarding the extension of the Inotera Supply Agreement. (See "Part II – Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Equity Method Investments – Inotera" note.)


(4)	Tera Probe: We have an approximate 40% ownership interest in Tera Probe, an entity that provides semiconductor probe and wafer testing services to us and others.

Manufacturing

Our manufacturing facilities are located in the United States, China, Japan, Malaysia, Puerto Rico, Singapore and Taiwan. Our Inotera joint venture has a wafer fabrication facility in Taiwan. Nearly all of our products are manufactured on 300mm wafers in facilities that generally operate 24 hours per day, 7 days per week. Semiconductor manufacturing is extremely capital intensive, requiring large investments in sophisticated facilities and equipment. A significant portion of our semiconductor equipment is replaced every three to five years with increasingly advanced equipment. DRAM, NAND Flash and NOR Flash products share a number of common manufacturing processes, enabling us to leverage our product and process technologies and manufacturing infrastructure across these product lines. In 2014, we transitioned one of our Singapore wafer fabrication facilities from production of DRAM to NAND Flash.

Our process for manufacturing semiconductor products is complex, involving a number of precise steps, including wafer fabrication, assembly and test. Efficient production of semiconductor products requires utilization of advanced semiconductor manufacturing techniques and effective deployment of these techniques across multiple facilities. The primary determinants of manufacturing cost are process line-width, number of mask layers, number of fabrication steps and number of good die produced on each wafer. Other factors that contribute to manufacturing costs are wafer size, cost and sophistication of manufacturing equipment, equipment utilization, process complexity, cost of raw materials, labor productivity, package type and cleanliness of the manufacturing environment. We continuously enhance our production processes, reducing die sizes and transitioning to higher density products. In 2014, the majority of our DRAM production was manufactured on our 30nm line-width process technology. We expect that in 2015 that the majority of our DRAM production will be manufactured on our 25nm and 20nm line-width process technologies. In 2014, a majority of our NAND Flash memory production was manufactured on 20nm line-width process technology. We expect that in 2015 a majority of our NAND Flash production will be manufactured on our 16nm line-width process technology. We expect to begin sampling 3D NAND Flash products in the fourth quarter of calendar 2014 and to begin volume production in the second half of calendar 2015.

Wafer fabrication occurs in a highly controlled, clean environment to minimize dust and other yield and quality-limiting contaminants. Despite stringent manufacturing controls, individual circuits may be nonfunctional or wafers may need to be scrapped due to equipment errors, minute impurities in materials, defects in photomasks, circuit design marginalities or defects and dust particles. Success of our manufacturing operations depends largely on minimizing defects to maximize yield of high-quality circuits. In this regard, we employ rigorous quality controls throughout the manufacturing, screening and testing processes. We are able to recover certain devices by testing and grading them to their highest level of functionality.

We test our products at various stages in the manufacturing process, perform high temperature burn-in on finished products and conduct numerous quality control inspections throughout the entire production flow. In addition, we use our proprietary AMBYX™ line of intelligent test and burn-in systems to perform simultaneous circuit tests of semiconductor memory die during the burn-in process, capturing quality and reliability data and reducing testing time and cost.

We sell semiconductor products in both packaged and unpackaged (i.e. "bare die") forms. Our packaged products include memory modules, SSDs, MCPs, managed NAND, memory cards and USB devices. We assemble many products in-house and, in some cases, outsource assembly services where we can reduce costs and minimize our capital investment. We contract with independent foundries and assembly and testing companies to manufacture NAND Flash media products such as memory cards and USB devices.

In recent years, we have produced an increasingly broad portfolio of products, which enhances our ability to allocate resources to our most profitable products but also increases the complexity of our manufacturing operations. Although our product lines generally use similar manufacturing processes, our overall cost efficiency can be affected by frequent conversions to new products, the allocation of manufacturing capacity to more complex, smaller-volume parts and the reallocation of manufacturing capacity across various product lines.

Availability of Raw Materials

Our operations require raw materials that meet exacting standards. We generally have multiple sources of supply for our raw materials. However, only a limited number of suppliers are capable of delivering certain raw materials that meet our standards. In some cases, materials are provided by a single supplier. Various factors could reduce the availability of raw materials such as silicon wafers, photomasks, chemicals, gases, photoresist, lead frames and molding compound. Shortages may occur from time to time in the future. We and/or our suppliers could be affected by laws and regulations enacted in response to concerns regarding climate change, which could increase the cost and limit the supply of our raw materials. In addition, disruptions in transportation lines could delay our receipt of raw materials. Lead times for the supply of raw materials have been extended in the past. If our supply of raw materials is disrupted or our lead times extended, our business, results of operations or financial condition could be materially adversely affected.

Marketing and Customers

Our products are sold into compute and graphics, mobile, SSD and other storage, automotive, industrial, medical and other embedded and server markets. Market concentrations from 2014 net sales were approximately as follows: 30% for compute and graphics (including desktop PCs, notebooks and workstations); 20% for mobile; 20% for SSD and other storage; 10% for automotive, industrial, medical and other embedded; and 10% for server. Sales to Kingston, primarily DRAM, were 10% of our net sales in 2014. Sales to Intel, primarily NAND Flash products through IM Flash, were 8% of our net sales in 2014, 10% of our net sales in 2013 and 12% of our net sales in 2012. Sales to HP, primarily DRAM, were 9% of our net sales in 2014, 10% of our net sales in 2013 and 8% of our net sales in 2012.

Our semiconductor memory products are offered under the Micron, Lexar®, Crucial™, SpecTek® and Elpida brand names and private labels. We market our semiconductor memory products primarily through our own direct sales force and maintain sales or representative offices in our primary markets around the world. We sell Lexar-branded NAND Flash memory products primarily through retail channels and our Crucial-branded products through a web-based customer direct sales channel as well as through channel and distribution partners. Our products are also offered through independent sales representatives and distributors. Independent sales representatives obtain orders subject to final acceptance by us and are compensated on a commission basis. We make shipments against these orders directly to the customer. Distributors carry our products in inventory and typically sell a variety of other semiconductor products, including competitors' products. We maintain inventory at locations in close proximity to certain key customers to facilitate rapid delivery of products. Many of our customers require a thorough review or qualification of semiconductor products, which may take several months.

Backlog

Because of volatile industry conditions, customers are reluctant to enter into long-term, fixed-price contracts. Accordingly, new order volumes for our semiconductor products fluctuate significantly. We typically accept orders with acknowledgment that the terms may be adjusted to reflect market conditions at the date of shipment. For these reasons, we do not believe that our order backlog as of any particular date is a reliable indicator of actual sales for any succeeding period.

Product Warranty

Because the design and manufacturing process for semiconductor products is highly complex, it is possible that we may produce products that do not comply with customer specifications, contain defects or are otherwise incompatible with end uses. In accordance with industry practice, we generally provide a limited warranty that our products are in compliance with our specifications existing at the time of delivery. Under our general terms and conditions of sale, liability for certain failures of product during a stated warranty period is usually limited to repair or replacement of defective items or return of, or a credit with respect to, amounts paid for such items. Under certain circumstances, we provide more extensive limited warranty coverage than that provided under our general terms and conditions.

Competition

We face intense competition in the semiconductor memory market from a number of companies, including Samsung Electronics Co., Ltd.; SanDisk Corporation; SK Hynix Inc. and Toshiba Corporation. Some of our competitors are large corporations or conglomerates that may have greater resources to withstand downturns in the semiconductor markets in which we compete, invest in technology and capitalize on growth opportunities. Our competitors seek to increase silicon capacity, improve yields, reduce die size and minimize mask levels in their product designs resulting in significantly increased worldwide supply and downward pressure on prices. Many of our high-volume memory products are manufactured to industry standard specifications and as such have similar performance characteristics to those of our competitors. For these high-volume memory products, the principal competitive factors are generally price and performance characteristics including: operating speed, power consumption, reliability, compatibility, size and form factors. For our other memory products, the aforementioned performance characteristics generally take precedence to pricing.

Research and Development

Our process technology R&D efforts are focused primarily on development of successively smaller line-width process technologies, as well as new, fundamentally different memory structures, materials and packages, which are designed to facilitate our transition to next generation memory products. Additional process technology R&D efforts focus on the enablement of advanced computing and mobile memory architectures, the investigation of new opportunities that leverage our core semiconductor expertise and the development of new manufacturing materials. Product design and development efforts include our high density DDR3 and DDR4 DRAM and LPDRAM products as well as high density and mobile NAND Flash memory (including 3D NAND and MLC and TLC technologies), NOR Flash memory, specialty memory, SSDs, HMCs and other memory technologies and systems.

Our R&D expenses were $1.37 billion, $931 million and $918 million in 2014, 2013 and 2012, respectively. We share certain R&D process technology and design costs for NAND Flash and emerging technologies with Intel. We shared R&D process and design costs for DRAM with Nanya through December 2012, when our cost-sharing agreement was terminated. As a result of reimbursements under our Intel and Nanya cost-sharing arrangements, our overall R&D expenses were reduced by $137 million, $146 million and $225 million in 2014, 2013 and 2012, respectively.

To compete in the semiconductor memory industry, we must continue to develop technologically advanced products and processes. We believe that expansion of our semiconductor product offerings is necessary to meet expected market demand for specific memory solutions. Our process, design and package development efforts occur at multiple locations across the world, with our largest R&D centers located in Boise, Idaho; Hiroshima, Japan; Hashimoto, Japan; and Milpitas, California. We have several additional product design centers in other strategic locations around the world. In addition, we develop photolithography mask technology at our MP Mask joint venture facility in Boise.

R&D expenses vary primarily with the number of development wafers processed, the cost of advanced equipment dedicated to new product and process development and personnel costs. Because of the lead times necessary to manufacture our products, we typically begin to process wafers before completion of performance and reliability testing. We deem development of a product complete once the product has been thoroughly reviewed and tested for performance and reliability. R&D expenses can vary significantly depending on the timing of product qualification.

Geographic Information

Sales to customers outside the United States totaled $13.81 billion for 2014 and included sales of $6.72 billion in China, $2.31 billion in Taiwan, $1.25 billion in Japan, $1.25 billion in Europe and $1.79 billion in the rest of the Asia Pacific region (excluding China, Japan and Taiwan). Sales to customers outside the United States totaled $7.56 billion for 2013 and $6.97 billion for 2012. As of August 28, 2014, we had net property, plant and equipment of $3.28 billion in the United States, $3.10 billion in Singapore, $1.22 billion in Japan, $761 million in Taiwan, $242 million in China, and $75 million in other countries. (See "Part II – Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Geographic Information" note and "Item 1A. Risk Factors.")

Patents and Licenses

In recent years, we have been recognized as a leader in per capita and quality of patents issued. As of August 28, 2014, we owned approximately 16,500 U.S. patents and 4,000 foreign patents. In addition, we have thousands of U.S. and foreign patent applications pending. Our patents have various terms expiring through 2033.

We have a number of patent and intellectual property license agreements and have from time to time licensed or sold our intellectual property to third parties. Some of these license agreements require us to make one-time or periodic payments while others have resulted in us receiving payments. We may need to obtain additional patent licenses or renew existing license agreements in the future and we may enter into additional sales or licenses of intellectual property and partnering arrangements. We are unable to predict whether these license agreements can be obtained or renewed on acceptable terms.

Employees

As of August 28, 2014, we had approximately 30,400 employees.

Environmental Compliance

Government regulations impose various environmental controls on raw materials and discharges, emissions and solid wastes from our manufacturing processes. In 2014, our wafer fabrication facilities continued to conform to the requirements of ISO 14001 certification. To continue certification, we must meet annual requirements in environmental policy, compliance, planning, management, structure and responsibility, training, communication, document control, operational control, emergency preparedness and response, record keeping and management review. While we have not experienced any material adverse effects to our operations from environmental regulations, changes in the regulations could necessitate additional capital expenditures, modification of our operations or other compliance actions.

Directors and Executive Officers of the Registrant

Our executive officers are appointed annually by the Board of Directors and our directors are elected annually by our shareholders. Any directors appointed by the Board of Directors to fill vacancies on the Board serve until the next election by the shareholders. All officers and directors serve until their successors are duly chosen or elected and qualified, except in the case of earlier death, resignation or removal.

As of August 28, 2014, the following executive officers and directors were subject to the reporting requirements of Section 16(a) of the Securities Exchange Act of 1934, as amended.



Name	Age	Position
Mark W. Adams	50	President
Scott J. DeBoer	48	Vice President of Research & Development
D. Mark Durcan	53	Director and Chief Executive Officer
Ronald C. Foster	63	Vice President of Finance and Chief Financial Officer
Patrick T. Otte	51	Vice President of Human Resources
Joel L. Poppen	50	Vice President of Legal Affairs, General Counsel, and Corporate Secretary
Brian M. Shirley	45	Vice President Memory Technology and Solutions
Steven L. Thorsen, Jr.	49	Vice President of Worldwide Sales and Corporate Marketing
Robert L. Bailey	57	Director
Richard M. Beyer	65	Director
Patrick J. Byrne	53	Director
D. Warren A. East	52	Director
Mercedes Johnson	60	Director
Lawrence N. Mondry	54	Director
Robert E. Switz	67	Chairman

Mark W. Adams joined us in June 2006 and served as our Vice President of Digital Media and Vice President of Worldwide Sales before being appointed our President in February 2012. From January 2006, until he joined us, Mr. Adams was the Chief Operating Officer of Lexar Media, Inc. Mr. Adams served as the Vice President of Sales and Marketing for Creative Labs, Inc. from December 2002 to January 2006. From March 2000 to September 2002, Mr. Adams was the Chief Executive Officer of Coresma, Inc. Mr. Adams holds a BA in Economics from Boston College and an MBA from Harvard Business School.

Scott J. DeBoer joined us in February 1995 as a process development engineer and has served in various leadership positions since that time. Dr. DeBoer became an officer in May 2007 and, in January 2013, he was appointed our Vice President of Research & Development. Dr. DeBoer holds a PhD in Electrical Engineering and an MS in Physics from Iowa State University. He completed his undergraduate degree at Hastings College.

D. Mark Durcan joined us in June 1984 and has served in various positions since that time. Mr. Durcan was appointed our Chief Operating Officer in February 2006, President in June 2007 and Director and Chief Executive Officer in February 2012. Mr. Durcan has been an officer since 1996. Mr. Durcan is a member of the Board of Directors of MWI Veterinary Supply, Inc. and Freescale Semiconductor, Inc. Mr. Durcan holds a BS and MChE in Chemical Engineering from Rice University. Mr. Durcan has served on our Board of Directors since February 2012.

Ronald C. Foster joined us in April 2008 and is the Chief Financial Officer and Vice President of Finance. He was appointed to his current position in 2008 after serving as a member of our Board of Directors from June 2004 to April 2005. Before joining Micron, Mr. Foster was the Chief Financial Officer of FormFactor, Inc. He previously served as the Chief Financial Officer for JDS Uniphase, Inc., and Novell, Inc. Mr. Foster holds a BA in Economics from Whitman College and an MBA from the University of Chicago.

Patrick T. Otte joined us in October 1987 and has served in various positions, including production and operations manager in several of our fabrication facilities and site director for our facility in Manassas, Virginia. Mr. Otte has served as our Vice President of Human Resources since March 2007. Mr. Otte holds a BA in Religious Education from St. Paul Bible College.

Joel L. Poppen joined us in October 1995 and has held various positions of increased responsibility, including Deputy General Counsel. He was appointed to his current position in December 2013. Mr. Poppen holds a BS in Electrical Engineering from the University of Illinois and a JD from the Duke University School of Law.

Brian M. Shirley joined us in August 1992 and has served in various leadership positions since that time. Mr. Shirley became Vice President of Memory in February 2006, Vice President of DRAM Solutions in June 2010 and has served as Vice President Memory Technology and Solutions since April 2014. Mr. Shirley holds a BS in Electrical Engineering from Stanford University.

Steven L. Thorsen, Jr. joined us in September 1988 and has served in various leadership positions since that time including Vice President and Chief Procurement Officer. Mr. Thorsen became Vice President of Worldwide Sales in April 2012. Mr. Thorsen holds a BA in Business Administration from Washington State University.

Robert L. Bailey was the Chairman of the Board of Directors of PMC-Sierra ("PMC") from 2005 until May 2011 and also served as PMC's Chairman from February 2000 until February 2003. Mr. Bailey has served as a director of PMC since October 1996. He also served as the President and Chief Executive Officer of PMC Sierra, Ltd. from July 1997 until May 2008. PMC is a leading provider of broadband communication and semiconductor storage solutions for the next-generation Internet. Mr. Bailey currently serves on the Board of Directors of Entropic Communications. Mr. Bailey holds a BS in Electrical Engineering from the University of Bridgeport and an MBA from the University of Dallas. He has served on our Board of Directors since 2007.

Richard M. Beyer was Chairman and CEO of Freescale Semiconductor from 2008 through June 2012 and continues to serve as a Director with Freescale. Prior to Freescale, Mr. Beyer was President, Chief Executive Officer and Director of Intersil Corporation from 2002 to 2008. He has also previously served in executive management roles at FVC.com, VLSI Technology and National Semiconductor Corporation. He currently serves on the Board of Directors of Dialog Semiconductor and Analog Devices. Mr. Beyer served three years as an officer in the United States Marine Corps. He holds a BA and an MA in Russian from Georgetown University and an MBA in Marketing and International Business from Columbia University Graduate School of Business. Mr. Beyer joined our Board of Directors in January 2013.

Patrick J. Byrne has served as the President of Tektronix, Inc., a subsidiary of Danaher Corporation, since July 2014. Mr. Byrne was Vice President of Strategy and Business Development and Chief Technical Officer of Danaher Corporation from November 2012 to July 2014. Danaher Corporation designs, manufactures, and markets innovative products and services to professional, medical, industrial, and commercial customers. Prior to that, Mr. Byrne was the Director, President and Chief Executive Officer of Intermec, Inc. from 2007 to May 2012. Mr. Byrne was with Agilent Technologies, Inc. from 1999 to 2007 and served in various management positions. Mr. Byrne holds a BS in Electrical Engineering from the University of California, Berkeley, and an MS in Electrical Engineering from Stanford University. Mr. Byrne joined our Board of Directors in April 2011.

D. Warren A. East was the CEO of ARM Holdings PLC from October 2001 to July 2013. He originally joined ARM in 1994, and served in various roles prior to being appointed CEO. He currently serves on the board of BT Group plc, De La Rule PLC, Inc. and Rolls Royce plc. Mr. East is a chartered engineer, Distinguished Fellow of the British Computer Society, Fellow of the Institution of Engineering and Technology, Fellow of the Royal Academy of Engineering and a Companion of the Chartered Management Institute. Mr. East holds a BA BSc(Eng) and an MBA MEng in Engineering Science from Oxford University and an MBA and honorary doctorate from Cranfield University. Mr. East joined our Board of Directors in July 2013.

Mercedes Johnson was the Senior Vice President and Chief Financial Officer of Avago Technologies Limited, a supplier of analog interface components for communications, industrial and consumer applications, from December 2005 to August 2008. She also served as the Senior Vice President, Finance, of Lam Research Corporation ("Lam") from June 2004 to January 2005 and as Lam's Chief Financial Officer from May 1997 to May 2004. Ms. Johnson holds a degree in Accounting from the University of Buenos Aires and currently serves on the Board of Directors for Intersil Corporation, Juniper Networks, Inc. and Teradyne, Inc. Ms. Johnson is the Chairman of the Board's Audit Committee and has served on our Board of Directors since 2005.

Lawrence N. Mondry has been the Chief Executive Officer of Apollo Brands, a consumer products portfolio company, since February 2014. Mr Mondry was the Chief Executive Officer of Flexi Compras Corporation, a rent-to-own retailer, from June 2013 to February 2014. Mr. Mondry was the President and Chief Executive Officer of CSK Auto Corporation ("CSK"), a specialty retailer of automotive aftermarket parts, from August 2007 to July 2008. Prior to his appointment at CSK, Mr. Mondry served as the Chief Executive Officer of CompUSA Inc. from November 2003 to May 2006. Mr. Mondry joined CompUSA in 1990. Mr. Mondry is the Chairman of the Board's Governance Committee and Compensation Committee. He has served on our Board of Directors since 2005.

Robert E. Switz was the Chairman, President and Chief Executive Officer of ADC Telecommunications, Inc., ("ADC"), a supplier of network infrastructure products and services from August 2003 until December 2010, when Tyco Electronics Ltd. acquired ADC. Mr. Switz joined ADC in 1994 and throughout his career there held numerous leadership positions. Mr. Switz holds an MBA from the University of Bridgeport and a BS in Business Administration from Quinnipiac University. Mr. Switz also serves on the Board of Directors for Broadcom Corporation, Cyan Optics, Inc., GT Advanced Technologies and Pulse Electronics Corporation. He has served on our Board of Directors since 2006 and was appointed Chairman of the Board in February 2012.

There are no family relationships between any of our directors or executive officers.

ITEM 1A. RISK FACTORS

In addition to the factors discussed elsewhere in this Form 10-K, the following are important factors which could cause actual results or events to differ materially from those contained in any forward-looking statements made by or on behalf of us.

We have experienced dramatic declines in average selling prices for our semiconductor memory products which have adversely affected our business.

If average selling prices for our memory products decrease faster than we can decrease per gigabit costs, our business, results of operations or financial condition could be materially adversely affected. We have experienced significant decreases in our average selling prices per gigabit in recent years as noted in the table below and may continue to experience such decreases in the future. In some prior periods, average selling prices for our memory products have been below our manufacturing costs and we may experience such circumstances in the future.



	DRAM	Trade NAND Flash*

	(percentage change in average selling prices)
2014 from 2013	6%	(23)%
2013 from 2012	(11)%	(18)%
2012 from 2011	(45)%	(55)%
2011 from 2010	(39)%	(12)%
* Trade NAND Flash excludes sales to Intel from IMFT.

We may be unable to maintain or improve gross margins.

Our gross margins are dependent upon continuing decreases in per gigabit manufacturing costs achieved through improvements in our manufacturing processes, including reducing the die size of our existing products. In future periods, we may be unable to reduce our per gigabit manufacturing costs at sufficient levels to maintain or improve gross margins. Factors that may limit our ability to reduce costs include, but are not limited to, strategic product diversification decisions affecting product mix, the increasing complexity of manufacturing processes, difficulty in transitioning to smaller line-width process technologies, technological barriers and changes in process technologies or products that may require relatively larger die sizes. Per gigabit manufacturing costs may also be affected by the relatively smaller production quantities and shorter product lifecycles of certain specialty memory products.

The semiconductor memory industry is highly competitive.

We face intense competition in the semiconductor memory market from a number of companies, including Samsung Electronics Co., Ltd.; SanDisk Corporation; SK Hynix Inc. and Toshiba Corporation. Some of our competitors are large corporations or conglomerates that may have greater resources to withstand downturns in the semiconductor markets in which we compete, invest in technology and capitalize on growth opportunities. Consolidation of industry competitors could put us at a competitive disadvantage. In addition, some governments, such as China, may be considering providing, or have provided, significant financial assistance to some of our competitors or to new entrants. Our competitors seek to increase silicon capacity, improve yields, reduce die size and minimize mask levels in their product designs. Transitions to smaller line-width process technologies and product and process improvements have resulted in significant increases in the worldwide supply of semiconductor memory. Increases in worldwide supply of semiconductor memory also result from semiconductor memory fab capacity expansions, either by way of new facilities, increased capacity utilization or reallocation of other semiconductor production to semiconductor memory production. Our competitors may increase capital expenditures resulting in future increases in worldwide supply. Increases in worldwide supply of semiconductor memory, if not accompanied by commensurate increases in demand, would lead to further declines in average selling prices for our products and would materially adversely affect our business, results of operations or financial condition.

Our Inotera Supply Agreement involves numerous risks.

We have a supply agreement with Inotera (the "Inotera Supply Agreement") under which we are obligated to purchase substantially all of Inotera's DRAM output over an initial three-year term at a purchase price based on a discount from market prices for our comparable components, currently through December 2016. The Inotera Supply Agreement contemplates annual negotiations with respect to potential successive one-year extensions, and if the parties do not agree to an extension, the agreement will terminate following the end of the then-existing term plus a subsequent three-year wind-down period. In the event of a wind-down, our share of Inotera's capacity would decline over the wind-down period. We are currently in negotiations regarding the extension of the Inotera Supply Agreement. There can be no assurance that we will be able to reach an agreement. Our Inotera Supply Agreement involves numerous additional risks including the following:


•	higher costs for supply obtained under the Inotera Supply Agreement as compared to our wholly-owned facilities;


•	difficulties and delays in ramping production at Inotera;


•	difficulties in transferring technology to Inotera; and


•	difficulties in coming to an agreement with Nanya regarding major corporate decisions, such as capital expenditures or capital structure.

For 2014, we purchased $2.68 billion of DRAM products from Inotera and our supply from Inotera accounted for 38% of our aggregate DRAM gigabit production. If our supply of DRAM from Inotera is impacted, our business, results of operations or financial condition could be materially adversely affected.

Debt obligations could adversely affect our financial condition.

We are engaged in a capital intensive business subject to significant changes in supply and demand and product pricing and recent periods of consolidation, any of which could result in our incurrence or assumption of indebtedness. In recent periods, our debt levels have increased. As of August 28, 2014, we had debt with a carrying value of $6.59 billion. In addition, the conversion value in excess of principal amount for our convertible notes outstanding as of August 28, 2014 was $2.99 billion. In 2014, we paid $2.30 billion to repurchase and settle conversion obligations for convertible notes with a principal amount of $1.09 billion. In the first quarter of 2015, we paid $389 million to settle conversion obligations for convertible notes with a principal amount of $114 million as of August 28, 2014. As of August 28, 2014, we had two credit facilities available that provide for up to $408 million of additional financing, subject to outstanding balances of trade receivables and other conditions. Events and circumstances may occur which would cause us to not be able to satisfy the applicable drawdown conditions and utilize either of these facilities. We have in the past and expect in the future to continue to incur additional debt to finance our capital investments, including debt incurred in connection with asset-backed financing.

Our debt obligations could adversely impact us. For example, these obligations could:


•	require us to use a large portion of our cash flow to pay principal and interest on debt, which will reduce the amount of cash flow available to fund working capital, capital expenditures, acquisitions, research and development expenditures and other business activities;


•	continue to dilute our earnings per share as a result of the conversion provisions in our convertible notes;


•	require us to continue to pay cash amounts substantially in excess of the principal amounts upon settlement of our convertible notes to minimize dilution of our earnings per share;


•	limit our future ability to raise funds for capital expenditures, strategic acquisitions or business opportunities, research and development and other general corporate requirements;


•	contribute to a future downgrade of our credit rating, which could increase future borrowing costs; and


•	increase our vulnerability to adverse economic and semiconductor memory industry conditions.

Our ability to meet our payment obligations under our debt instruments depends on our ability to generate significant cash flow in the future. This, to some extent, is subject to general economic, financial, competitive, legislative and regulatory factors as well as other factors that are beyond our control. There can be no assurance that our business will generate cash flow from operations, or that additional capital will be available to us, in an amount sufficient to enable us to meet our debt payment obligations and to fund other liquidity needs. If we are unable to generate sufficient cash flow to service our debt obligations, we may need to refinance or restructure our debt, sell assets, reduce or delay capital investments, or seek to raise additional capital. If we were unable to implement one or more of these alternatives, we may be unable to meet our debt payment obligations, which could have a material adverse effect on our business and results of operations.

We may be unable to generate sufficient cash flows or obtain access to external financing necessary to fund our operations, make scheduled debt payments and make adequate capital investments.

Our cash flows from operations depend primarily on the volume of semiconductor memory sold, average selling prices and per unit manufacturing costs. To develop new product and process technologies, support future growth, achieve operating efficiencies and maintain product quality, we must make significant capital investments in manufacturing technology, capital equipment, facilities, R&D and product and process technology. We estimate that capital spending for 2015 will be approximately $3.6 billion to $4.0 billion. In addition, as a result of the MMJ Acquisition, we believe that our future capital spending will be higher than our historical levels as we integrate our manufacturing operations and support the increase of capacity resulting from the transaction. As of August 28, 2014, we had cash and equivalents of $4.15 billion, short-term investments of $384 million and long-term marketable investments of $819 million. Cash and investments included $1.60 billion held by MMJ and its consolidated subsidiaries and $84 million held by IMFT, none of which is generally available to finance our other operations.

As a result of the corporate reorganization proceedings with the Japan Court under the Corporate Reorganization Act of Japan (the "Japan Proceedings"), for so long as such proceedings are continuing, the MMJ Companies and their subsidiaries are subject to certain restrictions on dividends, loans and advances. The plans of reorganization of the MMJ Companies prohibit the MMJ Companies from paying dividends, including any cash dividends, to us and require that excess earnings be used in their businesses or to fund the MMJ Companies' installment payments. These prohibitions would also effectively prevent the subsidiaries of the MMJ Companies from paying cash dividends to us in respect of the shares of such subsidiaries owned by the MMJ Companies, as any such dividends would have to be first paid to the MMJ Companies which are prohibited from repaying those amounts to us as dividends under the plans of reorganization. In addition, pursuant to an order of the Japan Court, the MMJ Companies cannot make loans or advances, other than certain ordinary course advances, to us without the consent of the Japan Court. Moreover, loans or advances by subsidiaries of the MMJ Companies may be considered outside of the ordinary course of business and subject to approval of the legal trustees and Japan Court. As a result, the assets of the MMJ Companies and their subsidiaries, while available to satisfy the MMJ Companies' installment payments and the other obligations, capital expenditures and other operating needs of the MMJ Companies and their subsidiaries, are not available for use by us in our other operations. Furthermore, certain uses of the assets of the MMJ Companies, including investments in certain capital expenditures in MMT, may require consent of MMJ's trustees and/or the Japan Court.

In the past we have utilized external sources of financing when needed. As a result of our current debt levels, expected debt amortization and general economic conditions, it may be difficult for us to obtain financing on terms acceptable to us. There can be no assurance that we will be able to generate sufficient cash flows, use cash held by MMJ to fund its capital expenditures, access capital markets or find other sources of financing to fund our operations, make debt amortization payments and make adequate capital investments to remain competitive in terms of technology development and cost efficiency. Our inability to do the foregoing could have a material adverse effect on our business and results of operations.

The acquisition of our ownership interest in Inotera from Qimonda has been challenged by the administrator of the insolvency proceedings for Qimonda.

On January 20, 2011, Dr. Michael Jaffé, administrator for Qimonda insolvency proceedings, filed suit against MTI and Micron Semiconductor B.V., our Netherlands subsidiary ("Micron B.V."), in the District Court of Munich, Civil Chamber. The complaint seeks to void under Section 133 of the German Insolvency Act a share purchase agreement between Micron B.V. and Qimonda signed in fall 2008 pursuant to which Micron B.V. purchased substantially all of Qimonda's shares of Inotera Memories, Inc. (the "Inotera Shares"), representing approximately 55% of our total shares in Inotera, and seeks an order requiring us to retransfer those shares to the Qimonda estate. The complaint also seeks, among other things, to recover damages for the alleged value of the joint venture relationship with Inotera and to terminate under Sections 103 or 133 of the German Insolvency Code a patent cross-license between us and Qimonda entered into at the same time as the share purchase agreement.

Following a series of hearings with pleadings, arguments and witnesses on behalf of the Qimonda estate, on March 13, 2014, the Court issued judgments: (1) ordering Micron B.V. to pay approximately $1 million in respect of certain Inotera shares sold in connection with the original share purchase; (2) ordering Micron B.V. to disclose certain information with respect to any Inotera Shares sold by it to third parties; (3) ordering Micron B.V. to disclose the benefits derived by it from ownership of the Inotera Shares, including in particular, any profits distributed on such shares and all other benefits; (4) denying Qimonda’s claims against Micron Technology for any damages relating to the joint venture relationship with Inotera; and (5) determining that Qimonda's obligations under the patent cross-license agreement are cancelled. In addition, the Court issued interlocutory judgments ordering, among other things: (1) that Micron B.V. transfer to the Qimonda estate the Inotera Shares still owned by it and pay to the Qimonda estate compensation in an amount to be specified for any Inotera Shares sold to third parties; and (2) that Micron B.V. pay the Qimonda estate as compensation an amount to be specified for benefits derived by it from ownership of the Inotera Shares. The interlocutory judgments have no immediate, enforceable effect on us, and, accordingly, we expect to be able to continue to operate with full control of the Inotera Shares subject to further developments in the case. We have filed a notice of appeal, and the parties have submitted briefs to the appeals court. A hearing on the matter is scheduled for February 2, 2015.

We are unable to predict the outcome of the matter and therefore cannot estimate the range of possible loss. The final resolution of this lawsuit could result in the loss of the Inotera shares or equivalent monetary damages, unspecified damages based on the benefits derived by Micron B.V. from the ownership of the Inotera Shares, and/or the termination of the patent cross-license, which could have a material adverse effect on our business, results of operation or financial condition. As of August 28, 2014, the Inotera Shares had a carrying value for purposes of our financial reporting of $505 million and a market value of $2.06 billion.

Our future success depends on our ability to develop and produce competitive new memory technologies.

Our key semiconductor memory technologies of DRAM, NAND Flash and NOR Flash face technological barriers to continue to meet long-term customer needs. These barriers include potential limitations on the ability to shrink products in order to reduce costs, meet higher density requirements and improve power consumption and reliability. To meet these requirements, we expect that new memory technologies will be developed by the semiconductor memory industry. Our competitors are working to develop new memory technologies that may offer performance and/or cost advantages to our existing memory technologies and render existing technologies obsolete. Accordingly, our future success may depend on our ability to develop and produce viable and competitive new memory technologies. There can be no assurance of the following:


•	that we will be successful in developing competitive new semiconductor memory technologies;


•	that we will be able to cost-effectively manufacture new products;


•	that we will be able to successfully market these technologies; and


•	that margins generated from sales of these products will allow us to recover costs of development efforts.

If our efforts to develop new semiconductor memory technologies are unsuccessful, our business, results of operations or financial condition may be materially adversely affected.

New product development may be unsuccessful.

We are developing new products that complement our traditional memory products or leverage their underlying design or process technology. We have made significant investments in product and process technologies and anticipate expending significant resources for new semiconductor product development, including system-level memory products, over the next several years. The process to develop DRAM, NAND Flash, NOR Flash and certain specialty memory products requires us to demonstrate advanced functionality and performance, many times well in advance of a planned ramp of production, in order to secure design wins with our customers. There can be no assurance that our product development efforts will be successful, that we will be able to cost-effectively manufacture new products, that we will be able to successfully market these products or that margins generated from sales of these products will allow us to recover costs of development efforts.

Products that fail to meet specifications, are defective or that are otherwise incompatible with end uses could impose significant costs on us.

Products that do not meet specifications or that contain, or are perceived by our customers to contain, defects or that are otherwise incompatible with end uses could impose significant costs on us or otherwise materially adversely affect our business, results of operations or financial condition. From time to time we experience problems with nonconforming, defective or incompatible products after we have shipped such products. In recent periods we have further diversified and expanded our product offerings which could potentially increase the chance that one or more of our products could fail to meet specifications in a particular application. As a result of these problems we could be adversely affected in several ways, including the following:


•	we may be required to compensate customers for costs incurred or damages caused by defective or incompatible product or replace products;


•	we could incur a decrease in revenue or adjustment to pricing commensurate with the reimbursement of such costs or alleged damages; and


•	we may encounter adverse publicity, which could cause a decrease in sales of our products.

A determination that our products or manufacturing processes infringe the intellectual property rights of others or entering into a license agreement covering such intellectual property could materially adversely affect our business, results of operations or financial condition.

As is typical in the semiconductor and other high technology industries, from time to time others have asserted, and may in the future assert, that our products or manufacturing processes infringe their intellectual property rights. We are unable to predict the outcome of assertions of infringement made against us. A court determination that our products or manufacturing processes infringe the intellectual property rights of others could result in significant liability and/or require us to make material changes to our products and/or manufacturing processes. Any of the foregoing results could have a material adverse effect on our business, results of operations or financial condition. (See "Item 1. Legal Proceedings.")

We have a number of intellectual property license agreements. Some of these license agreements require us to make one time or periodic payments. We may need to obtain additional patent licenses or renew existing license agreements in the future. We are unable to predict whether these license agreements can be obtained or renewed on acceptable terms.

Our joint ventures and strategic relationships involve numerous risks.

We have entered into strategic relationships to manufacture products and develop new manufacturing process technologies and products. These relationships include our IMFT NAND Flash joint venture with Intel, our Inotera DRAM joint venture with Nanya and our MP Mask joint venture with Photronics. These joint ventures and strategic relationships are subject to various risks that could adversely affect the value of our investments and our results of operations. These risks include the following:


•	our interests could diverge from our partners or we may not be able to agree with partners on ongoing manufacturing and operational activities, or on the amount, timing or nature of further investments in our joint venture;


•	we may experience difficulties in transferring technology to joint ventures;


•	we may experience difficulties and delays in ramping production at joint ventures;


•	our control over the operations of our joint ventures is limited;


•	we may recognize losses from our equity method investments in future periods;


•	due to financial constraints, our joint venture partners may be unable to meet their commitments to us or our joint ventures and may pose credit risks for our transactions with them;


•	due to differing business models or long-term business goals, our partners may decide not to join us in funding capital investment by our joint ventures, which may result in higher levels of cash expenditures by us;


•	cash flows may be inadequate to fund increased capital requirements;


•	we may experience difficulties or delays in collecting amounts due to us from our joint ventures and partners;


•	the terms of our partnering arrangements may turn out to be unfavorable; and


•	changes in tax, legal or regulatory requirements may necessitate changes in the agreements with our partners.

If our joint ventures and strategic relationships are unsuccessful, our business, results of operations or financial condition may be materially adversely affected.

The operations of the MMJ Companies will be subject to continued oversight by the Japan Court during the pendency of the corporate reorganization proceedings.

Because the plans of reorganization of the MMJ Companies provide for ongoing payments to creditors following the closing of our acquisition of MMJ, the Japan Proceedings are continuing, and the MMJ Companies remain subject to the oversight of the Japan Court and of the trustees (including a trustee designated by us, who we refer to as the business trustee, and a trustee designated by the Japan Court, who we refer to as the legal trustee), pending completion of the Japan Proceedings. The Japan Proceedings and oversight of the Japan Court are expected to continue until the final creditor payment is made under the MMJ Companies' plans of reorganization, which is scheduled to occur in December 2019, but may occur on a later date to the extent any claims of creditors remain unfixed on the final scheduled installment payment date. Although we may be able to petition the court to terminate the Japan Proceedings once two-thirds of all payments under the plans of reorganization are made, there can be no assurance that the Japan Court will grant any such petition.

During the pendency of the Japan Proceedings, the MMJ Companies are obligated to provide periodic financial reports to the Japan Court and may be required to obtain the consent of the Japan Court prior to taking a number of significant actions relating to their businesses, including transferring or disposing of, or acquiring, certain material assets, incurring or guaranteeing material indebtedness, settling disputes or entering into certain material agreements. The consent of the legal trustee may also be required for matters that would likely have a material impact on the operations or assets of the MMJ Companies and their subsidiaries or for transfers of material assets, to the extent the matters or transfers would reasonably be expected to materially and adversely affect execution of the plans of reorganization of the MMJ Companies. Accordingly, during the pendency of the Japan Proceedings, our ability to effectively integrate the MMJ Companies as part of our global operations or to cause the MMJ Companies to take certain actions that we deem advisable for their businesses could be adversely affected if the Japan Court or the legal trustee is unwilling to consent to various actions that we may wish to take with respect to the MMJ Companies.

If our manufacturing process is disrupted, our business, results of operations or financial condition could be materially adversely affected.

We manufacture products using highly complex processes that require technologically advanced equipment and continuous modification to improve yields and performance. Difficulties in the manufacturing process or the effects from a shift in product mix can reduce yields or disrupt production and may increase our per gigabit manufacturing costs. We maintain operations and continuously implement new product and process technology at our manufacturing operations which are widely dispersed in multiple locations in several countries including the U.S., Singapore, Taiwan, Japan and China. Additionally, our control over operations at our IMFT, Inotera, MP Mask and Tera Probe joint ventures is limited by our agreements with our partners. From time to time, we have experienced disruptions in our manufacturing process as a result of power outages, improperly functioning equipment, equipment failures, earthquakes or other environmental acts. If production at a fabrication facility is disrupted for any reason, manufacturing yields may be adversely affected or we may be unable to meet our customers' requirements and they may purchase products from other suppliers. This could result in a significant increase in manufacturing costs or loss of revenues or damage to customer relationships, any of which could materially adversely affect our business, results of operations or financial condition.

We may incur additional restructure or other charges in future periods.

In recent periods, we have implemented restructure activities and may implement restructure initiatives in future periods. As a result, we could incur restructure charges (including but not limited to severance and other termination benefits, losses on disposition or impairment of equipment or other long-lived assets and inventory write downs), lose production output, lose key personnel and experience disruptions in our operations and difficulties in the timely delivery of products. In connection with these actions, we recorded charges of $40 million for 2014 and $126 million for 2013. We do not anticipate incurring any significant additional costs for these prior restructure activities. We may incur additional restructure charges or other losses associated with other initiatives in future periods.

Changes in foreign currency exchange rates could materially adversely affect our business, results of operations or financial condition.

Across our multi-national operations, there are transactions and balances denominated in currencies other than the U.S. dollar (our reporting currency), primarily the euro, the Singapore dollar, the New Taiwan dollar, the yen and the yuan. We recorded net losses from changes in currency exchange rates of $28 million for 2014 and $229 million for 2013. Based on our foreign currency exposures from monetary assets and liabilities, offset by balance sheet hedges, we estimate that a 10% adverse change in exchange rates versus the U.S. dollar would result in losses of approximately $7 million as of August 28, 2014. In addition, a significant portion of our manufacturing costs are denominated in foreign currencies. Exchange rates for some of these currencies against the U.S. dollar, particularly the yen, have been volatile in recent periods. If these currencies strengthen against the U.S. dollar, our manufacturing costs could significantly increase. In the event that the exchange rates for U.S. dollar adversely change against our foreign currency exposures in the euro, Singapore dollar, New Taiwan dollar, the yen and the yuan, our results of operations or financial condition may be adversely affected.

We may make future acquisitions and/or alliances, which involve numerous risks.

Acquisitions and the formation or operation of alliances, such as joint ventures and other partnering arrangements, involve numerous risks including the following:


•	integrating the operations, technologies and products of acquired or newly formed entities into our operations;


•	increasing capital expenditures to upgrade and maintain facilities;


•	increased debt levels;


•	the assumption of unknown or underestimated liabilities;


•	the use of cash to finance a transaction, which may reduce the availability of cash to fund working capital, capital expenditures, research and development expenditures and other business activities;


•	diverting management's attention from normal daily operations;


•	managing larger or more complex operations and facilities and employees in separate and diverse geographic areas;


•	hiring and retaining key employees;


•	requirements imposed by governmental authorities in connection with the regulatory review of a transaction, which may include, among other things, divestitures or restrictions on the conduct of our business or the acquired business;


•	inability to realize synergies or other expected benefits;


•	failure to maintain customer, vendor and other relationships;


•	inadequacy or ineffectiveness of an acquired company's internal financial controls, disclosure controls and procedures, and/or environmental, health and safety, anti-corruption, human resource, or other policies or practices; and


•	impairment of acquired intangible assets and goodwill as a result of changing business conditions, technological advancements or worse-than-expected performance of the acquired business.

In recent years, supply of memory products has significantly exceeded customer demand resulting in significant declines in average selling prices for DRAM, NAND Flash and NOR Flash products. Resulting operating losses have led to the deterioration in the financial condition of a number of industry participants, including the liquidation of Qimonda and the 2012 bankruptcy filing by Elpida (now known as MMJ). These types of proceedings often lead to court-directed processes involving the sale of related businesses or assets. We believe the global memory industry is experiencing a period of consolidation as a result of these market conditions and other factors, and we may engage in discussions regarding potential acquisitions and similar opportunities arising out of these industry conditions. To the extent we are successful in completing any such transactions, we could be subject to some or all of the risks described above, including the risks pertaining to funding, assumption of liabilities, integration challenges and increases in debt that may accompany such transactions. Acquisitions of, or alliances with, high-technology companies are inherently risky and may not be successful and may materially adversely affect our business, results of operations or financial condition.

The limited availability of raw materials, supplies or capital equipment could materially adversely affect our business, results of operations or financial condition.

Our operations require raw materials, and in certain cases, third party services, that meet exacting standards. We generally have multiple sources of supply for our raw materials and services. However, only a limited number of suppliers are capable of delivering certain raw materials and services that meet our standards. In some cases, materials, components or services are provided by a single supplier. Various factors could reduce the availability of raw materials or components such as silicon wafers, controllers, photomasks, chemicals, gases, photoresist, lead frames and molding compound. Shortages may occur from time to time in the future. We and/or our suppliers could be affected by laws and regulations enacted in response to concerns regarding climate change, which could increase the cost and limit the supply of our raw materials. In addition, disruptions in transportation lines could delay our receipt of raw materials. Lead times for the supply of raw materials have been extended in the past. If our supply of raw materials or services is disrupted or our lead times extended, our business, results of operations or financial condition could be materially adversely affected.

Our operations are dependent on our ability to procure advanced semiconductor manufacturing equipment that enables the transition to lower cost manufacturing processes. For certain key types of equipment, including photolithography tools, we are sometimes dependent on a single supplier. From time to time we have experienced difficulties in obtaining some equipment on a timely basis due to the supplier's limited capacity. Our inability to timely obtain this equipment could adversely affect our ability to transition to next generation manufacturing processes and reduce costs. Delays in obtaining equipment could also impede our ability to ramp production at new facilities and increase our overall costs of the ramp. If we are unable to timely obtain advanced semiconductor manufacturing equipment, our business, results of operations or financial condition could be materially adversely affected.

We may incur additional tax expense or become subject to additional tax exposure.

We are subject to income taxes in the United States and numerous foreign jurisdictions, including among others, Singapore, where we currently have arrangements that allow us to compute our tax provision at rates below the local statutory rates. Our domestic and international taxes are dependent upon the distribution of our earnings among these different jurisdictions. Our provision for income taxes and cash tax liabilities in the future could be adversely affected by numerous factors, including challenges by tax authorities to our tax structure, income before taxes being lower than anticipated in countries with lower statutory tax rates and higher than anticipated in countries with higher statutory tax rates, changes in the valuation of deferred tax assets and liabilities and changes in tax laws and regulations. We and our subsidiaries file income tax returns with the U.S. federal government, various U.S. states and various foreign jurisdictions throughout the world. Our U.S. federal and state tax returns remain open to examination for 2010 through 2014. In addition, tax returns open to examination in multiple foreign taxing jurisdictions range from the years 2005 to 2014. The results of audits and examinations of previously filed tax returns and continuing assessments of our tax exposures may have an adverse effect on our provision for income taxes and cash tax liability.

We may not utilize all of our net deferred tax assets.

We have substantial deferred tax assets, which include, among others, net operating loss and credit carryforwards. As of August 28, 2014, our U.S. federal and state net operating loss carryforwards, including uncertain tax benefits, were $3.89 billion and $1.71 billion, respectively, which, if not utilized, will expire at various dates from 2015 through 2033. As of August 28, 2014, our foreign net operating loss carryforwards were $5.37 billion, including $3.95 billion pertaining to Japan, which, if not utilized, substantially all will expire at various dates from 2018 through 2023. As of August 28, 2014, we had valuation allowances of $1.29 billion and $979 million against our net deferred tax assets in the U.S. and Japan, respectively.

A downturn in the worldwide economy may harm our business.

Downturns in the worldwide economy have harmed our business in the past and future downturns could also adversely affect our business. Adverse economic conditions affect demand for devices that incorporate our products, such as personal computers, mobile devices, solid-state drives and servers. Reduced demand for these products could result in significant decreases in our average selling prices and product sales. A deterioration of current conditions in worldwide credit markets could limit our ability to obtain external financing to fund our operations and capital expenditures. In addition, we may experience losses on our holdings of cash and investments due to failures of financial institutions and other parties. Difficult economic conditions may also result in a higher rate of loss on our accounts receivables due to credit defaults. As a result, our business, results of operations or financial condition could be materially adversely affected.

Our results of operations could be affected by natural disasters and other events in the locations in which we or our customers or suppliers operate.

We have manufacturing and other operations in locations subject to natural occurrences such as severe weather and geological events including earthquakes or tsunamis that could disrupt operations. In addition, our suppliers and customers also have operations in such locations. A natural disaster, fire, explosion or other event that results in a prolonged disruption to our operations, or the operations of our customers or suppliers, may materially adversely affect our business, results of operations or financial condition.

We face risks associated with our international sales and operations that could materially adversely affect our business, results of operations or financial condition.

Sales to customers outside the United States approximated 84% of our consolidated net sales for 2014. In addition, a substantial portion of our manufacturing operations are located outside the United States. In particular, a significant portion of our manufacturing operations are concentrated in Taiwan, Singapore and Japan. Our international sales and operations are subject to a variety of risks, including:


•	export and import duties, changes to import and export regulations, customs regulations and processes and restrictions on the transfer of funds;


•	compliance with U.S. and international laws involving international operations, including the Foreign Corrupt Practices Act, export control laws and similar rules and regulations;


•	political and economic instability;


•	problems with the transportation or delivery of our products;


•	issues arising from cultural or language differences and labor unrest;


•	longer payment cycles and greater difficulty in collecting accounts receivable;


•	compliance with trade, technical standards and other laws in a variety of jurisdictions;


•	contractual and regulatory limitations on our ability to maintain flexibility with our staffing levels;


•	disruptions to our manufacturing operations as a result of actions imposed by foreign governments;


•	changes in economic policies of foreign governments; and


•	difficulties in staffing and managing international operations.

These factors may materially adversely affect our business, results of operations or financial condition.

Breaches of our network security could expose us to losses.

We manage and store on our network systems various proprietary information and sensitive or confidential data relating to our operations. We also process, store, and transmit large amounts of data relating to our customers and employees, including sensitive personal information. Computer programmers and hackers may be able to gain unauthorized access to our network system and steal proprietary information, compromise confidential information, create system disruptions, or cause shutdowns. These parties may also be able to develop and deploy viruses, worms, and other malicious software programs that disrupt our operations and create security vulnerabilities. Attacks on our network systems could result in significant losses and damage our reputation with customers.

We are subject to counterparty default risks.

We have numerous arrangements with financial institutions that subject us to counterparty default risks, including cash deposits, investments, capped-call contracts on our stock and derivative instruments. As a result, we are subject to the risk that the counterparty to one or more of these arrangements will default on its performance obligations. A counterparty may not comply with their contractual commitments which could then lead to their defaulting on their obligations with little or no notice to us, which could limit our ability to take action to mitigate our exposure. Additionally, our ability to mitigate our exposures may be constrained by the terms of our contractual arrangements or because market conditions prevent us from taking effective action. If one of our counterparties becomes insolvent or files for bankruptcy, our ability to recover any losses suffered as a result of that counterparty's default may be limited by the liquidity of the counterparty or the applicable laws governing the bankruptcy proceeding. In the event of such default, we could incur significant losses, which could adversely impact our business, results of operations or financial condition.

Compliance with new regulations regarding the use of conflict minerals could limit the supply and increase the cost of certain metals used in manufacturing our products.

Increased focus on environmental protection and social responsibility initiatives led to the passage of Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 (the "Dodd-Frank Act") and its implementing SEC regulations. The Dodd-Frank Act imposes new supply chain diligence and disclosure requirements for certain manufacturers of products containing specific minerals that may originate in or near the Democratic Republic of the Congo (the "DRC") and finance or benefit local armed groups. These "conflict minerals" are commonly found in materials used in the manufacture of semiconductors. The implementation of these new regulations may limit the sourcing and availability of some of these materials. This in turn may affect our ability to obtain materials necessary for the manufacture of our products in sufficient quantities and may affect related material pricing. Some of our customers may elect to disqualify us as a supplier if we are unable to verify that our products are DRC conflict free.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

ITEM 2. PROPERTIES

Our corporate headquarters are located in Boise, Idaho. The following is a summary of our principal facilities as of August 28, 2014:



Location		Principal Operations
Boise, Idaho		R&D, including wafer fabrication; reticle manufacturing; test and module assembly
Lehi, Utah		Wafer fabrication
Manassas, Virginia		Wafer fabrication
Singapore		Three wafer fabrication facilities and a test, assembly and module assembly facility
Aguadilla, Puerto Rico		Module assembly and test
Xi’an, China		Module assembly and test
Muar, Malaysia		Assembly and test
Taichung City, Taiwan		Wafer fabrication
Hiroshima, Japan		Wafer fabrication
Akita, Japan		Module assembly and test

Substantially all of the capacity of the facilities listed above is fully utilized. Our Inotera joint venture has a 300mm wafer fabrication facility in Kueishan, Taiwan. Under our supply agreement with Inotera, we purchase substantially all of the output of Inotera. We also own and lease a number of other facilities in locations throughout the world that are used for design, research and development, and sales and marketing activities.

In December 2013, we sold our 200mm wafer fabrication equipment in Kiryat Gat, Israel to Intel and terminated the related facility lease with Intel. Intel manufactured wafers for us at the Kiryat Gat facility through 2014 through a series of arrangements.

Our facility in Lehi is owned and operated by our IMFT joint venture with Intel. (See "Part II – Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Equity – Noncontrolling Interests in Subsidiaries – IMFT" note.)

We believe that our existing facilities are suitable and adequate for our present purposes. We do not identify or allocate assets by operating segment. (See "Part II – Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Geographic Information" note.)

ITEM 3. LEGAL PROCEEDINGS

Reorganization Proceedings of the MMJ Companies

On July 31, 2013, we completed the acquisition of Elpida, now known as MMJ, a Japanese corporation, pursuant to the terms and conditions of an Agreement on Support for Reorganization Companies (as amended, the "Sponsor Agreement") that we entered into on July 2, 2012 with the trustees of the MMJ Companies' pending corporate reorganization proceedings under the Corporate Reorganization Act of Japan.

The MMJ Companies filed petitions for commencement of corporate reorganization proceedings with the Japan Court under the Corporate Reorganization Act of Japan on February 27, 2012, and the Japan Court issued an order to commence the reorganization proceedings (the "Japan Proceedings") on March 23, 2012. On July 2, 2012, we entered into the Sponsor Agreement with the legal trustees of the MMJ Companies and the Japan Court approved the Sponsor Agreement. Under the Sponsor Agreement, we agreed to provide certain support for the reorganization of the MMJ Companies and the trustees agreed to prepare and seek approval from the Japan Court and the MMJ Companies' creditors of plans of reorganization consistent with such support.

The trustees initially submitted the proposed plans of reorganization for the MMJ Companies to the Japan Court on August 21, 2012 and submitted final proposed plans on October 29, 2012. On October 31, 2012, the Japan Court approved submission of the trustees' proposed plans of reorganization to creditors for approval. On February 26, 2013, the MMJ Companies' creditors approved the reorganization plans and on February 28, 2013, the Japan Court issued an order approving the plans of reorganization. Appeals filed by certain creditors of MMJ in Japan challenging the plan approval order issued by the Japan Court were denied.

In a related action, MMJ filed a Verified Petition for Recognition and Chapter 15 Relief in the United States Bankruptcy Court for the District of Delaware (the "U.S. Court") on March 19, 2012 and, on April 24, 2012, the U.S. Court entered an order that, among other things, recognized MMJ's corporate reorganization proceeding as a foreign main proceeding pursuant to 11 U.S.C. § 1517(b). On June 25, 2013, the U.S. Court issued a recognition order, which recognized the order of the Japan Court approving MMJ's plan of reorganization. On November 19, 2013, the U.S. Court closed the U.S. Chapter 15 proceeding.

The plans of reorganization provide for payments by the MMJ Companies to their secured and unsecured creditors in an aggregate amount of 200 billion yen, less certain expenses of the reorganization proceedings and certain other items. The plans of reorganization also provided for the investment by us pursuant to the Sponsor Agreement of 60 billion yen ($615 million) paid at closing in cash into MMJ in exchange for 100% ownership of MMJ's equity and the use of such investment to fund the initial installment payment by the MMJ Companies to their creditors of 60 billion yen, subject to reduction for certain items specified in the Sponsor Agreement and plans of reorganization.

Under MMJ's plan of reorganization, secured creditors will recover 100% of the amount of their fixed claims and unsecured creditors will recover at least 17.4% of the amount of their fixed claims. The actual recovery of unsecured creditors will be higher, however, based, in part, on events and circumstances occurring following the plan approval. The remaining portion of the unsecured claims will be discharged, without payment, over the period that payments are made pursuant to the plans of reorganization. The secured creditors will be paid in full on or before the sixth installment payment date, while the unsecured creditors will be paid in seven installments. MAI's plan of reorganization provides that secured creditors will recover 100% of the amount of their claims, whereas unsecured creditors will recover 19% of the amount of their claims. The secured creditors of MAI were paid in full on the first installment payment date, while the unsecured creditors will be paid in seven installments.

Because the plans of reorganization of the MMJ Companies provide for ongoing payments to creditors following the closing of the MMJ acquisition, the Japan Proceedings are continuing and the MMJ Companies remain subject to the oversight of the Japan Court and of the trustees (including a trustee designated by us, who we refer to as the business trustee, and a trustee designated by the Japan Court, who we refer to as the legal trustee), pending completion of the reorganization proceedings. The business trustee will make decisions in relation to the operation of the businesses of the MMJ Companies, other than decisions in relation to acts that need to be carried out in connection with the Japan Proceedings, which will be the responsibility of the legal trustee. The Japan Proceedings and oversight of the Japan Court will continue until the final creditor payment is made under the MMJ Companies' plans of reorganization, which is scheduled to occur in December 2019, but may occur on a later date to the extent any claims of creditors remain unfixed on the final scheduled installment payment date. The MMJ Companies may petition the Japan Court for an early termination of the Japan Proceedings once two-thirds of all payments under the plans of reorganization are made. Although such early terminations are customarily granted, there can be no assurance that the Japan Court will grant any such petition in these particular cases.

During the pendency of the Japan Proceedings, the MMJ Companies are obligated to provide periodic financial reports to the Japan Court and may be required to obtain the consent of the Japan Court prior to taking a number of significant actions relating to their businesses, including transferring or disposing of, or acquiring, certain material assets, incurring or guaranteeing material indebtedness, settling material disputes, or entering into certain material agreements. The consent of the legal trustee may also be required for matters that would likely have a material impact on the operations or assets of the MMJ Companies and their subsidiaries or for transfers of material assets, to the extent the matters or transfers would reasonably be expected to materially and adversely affect execution of the plans of reorganization of the MMJ Companies. Accordingly, during the pendency of the Japan Proceedings, our ability to effectively integrate the MMJ Companies as part of our global operations or to cause the MMJ Companies to take certain actions that we deem advisable for their businesses could be adversely affected if the Japan Court or the legal trustee is unwilling to consent to various actions that we may wish to take with respect to the MMJ Companies.

Rambus

On May 5, 2004, Rambus, Inc. ("Rambus") filed a complaint in the Superior Court of the State of California (San Francisco County) against us and other DRAM suppliers which alleged that the defendants harmed Rambus by engaging in concerted and unlawful efforts affecting Rambus DRAM by eliminating competition and stifling innovation in the market for computer memory technology and computer memory chips. Rambus' complaint alleged various causes of action under California state law including, among other things, a conspiracy to restrict output and fix prices, a conspiracy to monopolize, intentional interference with prospective economic advantage, and unfair competition. Rambus sought a judgment for damages of approximately $3.90 billion, joint and several liability, trebling of damages awarded, punitive damages, a permanent injunction enjoining the defendants from the conduct alleged in the complaint, interest, and attorneys' fees and costs. Trial began on June 20, 2011, and the case went to the jury on September 21, 2011. On November 16, 2011, the jury found for us on all claims. On April 2, 2012, Rambus filed a notice of appeal to the California 1st District Court of Appeal.

We were engaged in litigation with Rambus relating to certain of Rambus' patents and certain of our claims and defenses. Our lawsuits with Rambus related to patent matters were pending in the U.S. District Court for the District of Delaware, U.S. District Court for the Northern District of California, Germany, France, and Italy.

In December 2013, we settled all pending litigation between us and Rambus, including all antitrust and patent matters. We also entered into a seven-year term patent cross-license agreement with Rambus that allows us to avoid costs of patent-related litigation during the term. We agreed to pay Rambus up to $10 million per quarter over seven years, for a total of $280 million, beginning in the second quarter of 2014. The primary benefits we received from these arrangements were (1) the settlement and termination of all existing litigation, (2) the avoidance of future litigation expenses and (3) the avoidance of future management and customer disruptions. As a result, other operating expense for the first quarter of 2014 included a $233 million charge to accrue a liability, which reflects the discounted value of amounts due under this arrangement.

Patent Matters

On September 1, 2011, HSM Portfolio LLC and Technology Properties Limited LLC filed a patent infringement action in the U.S. District Court for the District of Delaware against us and seventeen other defendants, including MMJ and Elpida Memory (USA) Inc. On August 22, 2013, the plaintiffs filed a third amended complaint. The third amended complaint alleges that certain of our DRAM and image sensor products infringe four U.S. patents and that certain MMJ and Elpida Memory (USA) Inc. DRAM products infringe two U.S. patents and seeks damages, attorneys' fees, and costs. Trial currently is scheduled for February 22, 2016. On March 23, 2012, MMJ and Elpida Memory (USA) Inc. filed a Notice of Filing and Hearing on Petition Under Chapter 15 of the U.S. Bankruptcy Code and Issuance of Provisional Relief that included an order of the U.S. Bankruptcy Court for the District of Delaware staying judicial proceedings against MMJ and Elpida Memory (USA) Inc. Accordingly, the plaintiffs' case against MMJ and Elpida Memory (USA) was stayed. On June 25, 2013, the U.S. Bankruptcy Court for the District of Delaware entered its Order (1) Granting Recognition of the Japanese Reorganization Plan of MMJ and the Tokyo District Court's Confirmation Orders, (2) Entrusting MMJ's U.S. Assets to Foreign Representatives and Approving Certain Plan Transactions, (3) Granting Permanent Injunction, and (4) Granting Related Relief (the "Recognition Order"). Pursuant to the Recognition Order, the plaintiffs are permanently enjoined from continuing their case against MMJ and Elpida Memory (USA) Inc. in respect of any claim or claims arising prior to the commencement of the Japan Proceeding (as defined in the Recognition Order).

On December 5, 2011, the Board of Trustees for the University of Illinois (the "University") filed a patent infringement action against us in the U.S. District Court for the Central District of Illinois. The complaint alleges that unspecified semiconductor products of ours infringe three U.S. patents and seeks injunctive relief, damages, attorneys' fees, and costs. We have filed three petitions for inter-partes review by the Patent and Trademark Office, challenging the validity of each of the patents in suit. The Patent Trial and Appeal Board ("PTAB") held a hearing in connection with the three petitions on December 9, 2013. On March 10, 2014, the PTAB issued written decisions finding that each and every claim in the three patents in suit is invalid, and cancelled all claims. The University has appealed the PTAB rulings to the U.S. Court of Appeals for the Federal Circuit.

On April 27, 2012, Semcon Tech, LLC filed a patent infringement action against us in the U.S. District Court for the District of Delaware. The complaint alleges that our use of various chemical mechanical planarization systems purchased from Applied Materials infringes a single U.S. patent and seeks injunctive relief, damages, attorneys' fees, and costs. Trial is currently scheduled for August 21, 2015.

On December 7, 2007, Tessera, Inc. filed a patent infringement action against MMJ, Elpida Memory (USA) Inc., and numerous other defendants, in the United States District Court for the Eastern District of Texas. The complaint alleges that certain MMJ and Elpida Memory (USA) Inc. products infringe four U.S. patents and seeks injunctive relief, damages, attorneys' fees, and costs. Prior to answering the complaint, MMJ and Elpida Memory (USA) Inc. and other defendants filed motions to stay the case pending final resolution of a case before the International Trade Commission ("ITC") against MMJ and Elpida Memory (USA) Inc. and other respondents, alleging infringement of the same patents asserted in the Eastern District of Texas case (In The Matter of Certain Semiconductor Chips with Minimized Chip Package Size and Products Containing Same (III), ITC No. 337-TA-630 (the "ITC Action")). On February 25, 2008, the Eastern District of Texas Court granted the defendants' motion to stay the action. On December 29, 2009, the ITC issued a Notice of Final Determination in the ITC Action finding no violation by MMJ and Elpida Memory (USA) Inc. Tessera, Inc. subsequently appealed the matter to the U.S. Court of Appeals for the Federal Circuit. On May 23, 2011, the Federal Circuit affirmed the ITC's Final Determination. Additionally, by operation of the Recognition Order, plaintiff in that action is permanently enjoined from continuing its case against MMJ and Elpida Memory (USA) in respect of any claim or claims arising prior to the commencement of the Japan Proceeding (as defined in the Recognition Order). On July 30, 2014, we entered into a five-year term patent cross-license agreement with Tessera, which also settled the pending litigation against MMJ and Elpida Memory (USA). The agreement, which requires us to make quarterly payments over its term, gives us "life-of-product" protection for specifically identified DRAM products and a term license for certain other products.

Among other things, the above lawsuits pertain to certain of our DDR, DDR2, DDR3, SDR SDRAM, PSRAM, RLDRAM, LPDRAM, NAND Flash, image sensor products and certain other memory products we manufacture, which account for a significant portion of our net sales.

Except for the Tessera matter discussed above, we are unable to predict the outcome of assertions of infringement made against us and therefore cannot estimate the range of possible loss. A determination that our products or manufacturing processes infringe the intellectual property rights of others or entering into a license agreement covering such intellectual property could result in significant liability and/or require us to make material changes to our products and/or manufacturing processes. Any of the foregoing could have a material adverse effect on our business, results of operations or financial condition.

Antitrust Matters

A number of purported class action price-fixing lawsuits have been filed against us and other DRAM suppliers. Four cases have been filed in the U.S. District Court for the Northern District of California asserting claims on behalf of a purported class of individuals and entities that indirectly purchased DRAM and/or products containing DRAM from various DRAM suppliers during the time period from April 1, 1999 through at least June 30, 2002. The complaints allege a conspiracy to increase DRAM prices in violation of federal and state antitrust laws and state unfair competition law, and/or unjust enrichment relating to the sale and pricing of DRAM products. The complaints seek joint and several damages, trebled, monetary damages, restitution, costs, interest and attorneys' fees. In addition, at least sixty-four cases have been filed in various state courts asserting claims on behalf of a purported class of indirect purchasers of DRAM. In July 2006, the Attorneys General for approximately forty U.S. states and territories filed suit in the U.S. District Court for the Northern District of California. The complaints allege, among other things, violations of the Sherman Act, Cartwright Act, and certain other states' consumer protection and antitrust laws and seek joint and several damages, trebled, as well as injunctive and other relief. On October 3, 2008, the California Attorney General filed a similar lawsuit in California Superior Court, purportedly on behalf of local California government entities, alleging, among other things, violations of the Cartwright Act and state unfair competition law. On June 23, 2010, we executed a settlement agreement resolving these purported class-action indirect purchaser cases and the pending cases of the Attorneys General relating to alleged DRAM price-fixing in the United States. Subject to certain conditions, we agreed to pay approximately $67 million in aggregate in three equal installments over a two-year period. We paid the full amount into an escrow account by the end of the first quarter of 2013 in accordance with the settlement agreement.

On June 21, 2010, the Brazil Secretariat of Economic Law of the Ministry of Justice ("SDE") announced that it had initiated an investigation relating to alleged anticompetitive activities within the DRAM industry. The SDE's Notice of Investigation names various DRAM manufacturers and certain executives, including us, and focuses on the period from July 1998 to June 2002.

We are unable to predict the outcome of these matters and therefore cannot estimate the range of possible loss, except as noted in the above discussion of the U.S. indirect purchaser cases. The final resolution of these alleged violations of antitrust laws could result in significant liability and could have a material adverse effect on our business, results of operations or financial condition.

Securities Matters

On July 12, 2013, seven former shareholders of Elpida (now known as MMJ) filed a complaint against Messrs. Sakamoto, Adachi, Gomi, Shirai, Tsay-Jiu, Wataki, Kinoshita, and Takahasi in their capacity as members of the board of directors of MMJ as of February 2013. The complaint alleges that the defendants engaged in various acts and misrepresentations to hide the financial condition of MMJ and deceive shareholders prior to MMJ filing a petition for corporate reorganization on February 27, 2013. The plaintiffs seek joint and several damages equal to the market value of shares owned by each of the plaintiffs on February 23, 2013, along with attorneys' fees and interest. At a hearing on September 25, 2013, the plaintiffs withdrew the complaint against Mr. Tsay-Jiu.

We are unable to predict the outcome of this matter and therefore cannot estimate the range of possible loss. The final resolution of this matter could result in significant liability and could have a material adverse effect on our business, results of operations or financial condition.

Qimonda

We are unable to predict the outcome of the matter and therefore cannot estimate the range of possible loss. The final resolution of this lawsuit could result in the loss of the Inotera Shares or equivalent monetary damages, unspecified damages based on the benefits derived by Micron B.V. from the ownership of the Inotera Shares, and/or the termination of the patent cross-license, which could have a material adverse effect on our business, results of operation or financial condition. As of August 28, 2014, the Inotera Shares had a carrying value for purposes of our financial reporting of $505 million and a market value of $2.06 billion.

(See "Item 1A. Risk Factors.")

ITEM 4. MINE SAFETY DISCLOSURES

Not Applicable.

PART II

ITEM 5. MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market for Common Stock

Our common stock is listed on the NASDAQ Global Select Market and trades under the symbol "MU." The following table represents the high and low closing sales prices for our common stock for each quarter of 2014 and 2013, as reported by Bloomberg L.P.:



	Fourth Quarter		Third Quarter		Second Quarter		First Quarter
2014:
High	$	34.64	$	28.61	$	25.49	$	21.17
Low	28.59		21.13		20.67		13.57

2013:
High	$	14.97	$	11.89	$	8.38	$	6.70
Low	11.68		8.25		5.93		5.17

Holders of Record

As of October 16, 2014, there were 2,471 shareholders of record of our common stock.

Dividends

We have not declared or paid cash dividends since 1996 and do not intend to pay cash dividends for the foreseeable future.

As a result of the Japan Proceedings, for so long as such proceedings are continuing, the MMJ Group is subject to certain restrictions on dividends, loans and advances. Our ability to access IMFT's cash and other assets through dividends, loans or advances, including to finance our other operations, is subject to agreement by Intel.

Equity Compensation Plan Information

The information required by this item is incorporated by reference from the information set forth in Item 12 of this Annual Report on Form 10-K.

Issuer Purchases of Equity Securities

During the fourth quarter of 2014, we acquired, as payment of withholding taxes or exercise prices in connection with the vesting or exercise of equity awards, 5,479 shares of our common stock at an average price per share of $32.02. We retired these shares in the fourth quarter of 2014.

Period

(a) Total number of shares purchased

(b) Average price paid per share

(d) Maximum number (or approximate dollar value) of shares (or units) that may yet be purchased under the plans or programs

May 30, 2014

–

July 3, 2014

1,914

29.65

N/A

July 4, 2014

–

July 31, 2014

3,395

33.42

N/A

August 1, 2014

–

August 28, 2014

170

30.70

N/A

5,479

32.02

Performance Graph

The following graph illustrates a five-year comparison of cumulative total returns for our common stock, the S&P 500 Composite Index and the Philadelphia Semiconductor Index (SOX) from August 31, 2009, through August 31, 2014. We operate on a 52 or 53 week fiscal year which ends on the Thursday closest to August 31. Accordingly, the last day of our fiscal year varies. For consistent presentation and comparison to the industry indices shown herein, we have calculated our stock performance graph assuming an August 31 year end.

Note: Management cautions that the stock price performance information shown in the graph above is provided as of August 31 for the years presented and may not be indicative of current stock price levels or future stock price performance.

The performance graph above assumes $100 was invested on August 31, 2009 in common stock of Micron Technology, Inc., the S&P 500 Composite Index and the Philadelphia Semiconductor Index (SOX). Any dividends paid during the period presented were assumed to be reinvested. The performance was plotted using the following data:



	2009		2010		2011		2012		2013		2014
Micron Technology, Inc.	$	100	$	88	$	80	$	84	$	184	$	442
S&P 500 Composite Index	100		105		124		147		174		218
Philadelphia Semiconductor Index (SOX)	100		102		119		135		159		227

ITEM 6. SELECTED FINANCIAL DATA



	2014		2013		2012			2011		2010

	(in millions except per share amounts)
Net sales	$	16,358	$	9,073	$	8,234		$	8,788	$	8,482
Gross margin	5,437		1,847		968			1,758		2,714
Operating income (loss)	3,087		236		(612		)	761		1,612
Net income (loss)	3,079		1,194		(1,031		)	190		1,900
Net income (loss) attributable to Micron	3,045		1,190		(1,032		)	167		1,850
Diluted earnings (loss) per share	2.54		1.13		(1.04		)	0.17		1.85

Cash and short-term investments	4,534		3,101		2,559			2,160		2,913
Total current assets	10,245		8,911		5,758			5,832		6,333
Property, plant and equipment, net	8,682		7,626		7,103			7,555		6,601
Total assets	22,498		19,118		14,328			14,752		14,693
Total current liabilities	4,811		4,125		2,243			2,480		2,702
Long-term debt	4,955		4,452		3,038			1,861		1,648
Redeemable convertible notes	57		—		—			—		—
Total Micron shareholders’ equity	10,771		9,142		7,700			8,470		8,020
Noncontrolling interests in subsidiaries	802		864		717			1,382		1,796
Total equity	11,573		10,006		8,417			9,852		9,816

On July 31, 2013, we completed the MMJ Acquisition, in which we acquired Elpida, now known as MMJ, and a controlling interest in Rexchip, now known as MMT. The MMJ Group's products include mobile DRAM targeted to mobile phones and tablets and computing DRAM targeted to desktop PCs, servers, notebooks and workstations. The MMJ Acquisition included a 300mm DRAM wafer fabrication facility located in Hiroshima, Japan, a 300mm DRAM wafer fabrication facility in Taichung City, Taiwan and an assembly and test facility located in Akita, Japan. In connection with the MMJ Acquisition, we recorded net assets of $2.60 billion, noncontrolling interests of $168 million and a gain on the transaction of $1.48 billion in 2013. (See "Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Micron Memory Japan, Inc." note.)

We entered into a joint venture relationship with Intel to form IMFT in 2006 and IMFS in 2007 to manufacture NAND Flash memory products for the exclusive use of the members. We have owned 51% of IMFT from inception through August 28, 2014. Our ownership percentage of IMFS had increased from 51% at inception to 82% as of April 6, 2012 due to a series of contributions by us that were not fully matched by Intel. On April 6, 2012, we entered into a series of agreements with Intel to restructure IM Flash, in which we acquired Intel's remaining 18% interest in IMFS for $466 million. In addition, we acquired IMFT's assets located at our Virginia wafer fabrication facility, for which Intel received a distribution from IMFT of $139 million. For both transactions, the amounts Intel received approximated the book values of Intel's interests in the assets acquired. We consolidate IM Flash and report Intel's ownership interests as noncontrolling interests in subsidiaries. (See "Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Equity – Noncontrolling Interests in Subsidiaries – IM Flash" note.)

On May 7, 2010, we acquired Numonyx, which manufactured and sold primarily NOR Flash and NAND Flash memory products. The total fair value of the consideration paid for Numonyx was $1.11 billion and consisted of 138 million shares of our common stock issued to the Numonyx shareholders and 5 million restricted stock units issued to employees of Numonyx. In connection with the acquisition, we recorded net assets of $1.55 billion. Because the fair value of the net assets acquired exceeded the purchase price, we recognized a gain on the acquisition of $437 million in 2010. In addition, we recognized a $51 million income tax benefit in connection with the acquisition.

We have a noncontrolling interest in Inotera, a publicly-traded DRAM manufacturer in Taiwan. Through December 2012, we purchased 50% of Inotera's wafer production capacity based on a margin-sharing formula among Nanya, Inotera and us. Since January 2013, we have purchased substantially all of Inotera's DRAM output at a discount from market prices for our comparable components under a new supply agreement (the "Inotera Supply Agreement"). Our costs for supply from Inotera increased in 2014 from 2013 due to changes in average selling prices for our DRAM products and the changes in the pricing terms. The Inotera Supply Agreement has a three-year term (currently through December 2016) that contemplates annual negotiations with respect to potential successive one-year extensions. If the parties do not agree to an extension, the agreement will terminate following the end of the then-existing term plus a subsequent three-year wind-down period. In the event of a wind-down, our share of Inotera's capacity would decline over the wind-down period. In 2014, our cost of products purchased from Inotera was significantly higher than our cost of similar products manufactured in our wholly-owned facilities. We are currently in negotiations regarding the extension of the Inotera Supply Agreement. There can be no assurance that we will be able to reach an agreement. As of August 28, 2014, our ownership interest in Inotera was 33%. (See "Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Equity Method Investments – Inotera" note.)

(See "Item 1A. Risk Factors" and "Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements.")

ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following discussion contains trend information and other forward-looking statements that involve a number of risks and uncertainties. Forward-looking statements include, but are not limited to, statements such as those made in "Operating Expenses and Other" regarding SG&A and R&D expenses for the first quarter of 2015 and future Restructure and Asset Impairment costs; and in "Liquidity and Capital Resources" regarding our pursuit of additional financing and debt restructuring, regarding the use of cash on hand to fund any repurchases of common stock, regarding the sufficiency of our cash and investments, cash flows from operations and available financing to meet our requirements for at least the next 12 months, regarding capital spending in 2015 and regarding the timing of payments for certain contractual obligations. Our actual results could differ materially from our historical results and those discussed in the forward-looking statements. Factors that could cause actual results to differ materially include, but are not limited to, those identified in "Part I, Item 1A. Risk Factors." This discussion should be read in conjunction with the consolidated financial statements and accompanying notes for the year ended August 28, 2014. All period references are to our fiscal periods unless otherwise indicated. Our fiscal year is the 52 or 53-week period ending on the Thursday closest to August 31 and fiscal 2014, 2013 and 2012 each contained 52 weeks. Our fiscal 2015 will contain 53 weeks and the first quarter of fiscal 2015 will contain 14 weeks. All production data includes the production of IMFT and Inotera. All tabular dollar amounts are in millions.

Our Management's Discussion and Analysis ("MD&A") is provided in addition to the accompanying consolidated financial statements and notes to assist readers in understanding our results of operations, financial condition and cash flows. MD&A is organized as follows:


•	Overview: Highlights of key transactions and events.


•	Results of Operations: An analysis of our financial results consisting of the following:


◦	Consolidated results;


◦	Operating results by business segment;


◦	Operating results by product; and


◦	Operating expenses and other.


•	Liquidity and Capital Resources: An analysis of changes in our balance sheet and cash flows and discussion of our financial condition and potential sources of liquidity.


•	Off-Balance Sheet Arrangements: Description of off-balance sheet arrangements.


•	Critical Accounting Estimates: Accounting estimates that we believe are most important to understanding the assumptions and judgments incorporated in our reported financial results and forecasts.

Overview

For an overview of our business, see "Item 1 – Business – Overview." Our results of operations for 2014 were affected by the following key transaction.

Acquisition of Micron Memory Japan, Inc.

On July 31, 2013, we completed the MMJ Acquisition, in which we acquired Elpida, now known as MMJ, and a controlling interest in Rexchip, now known as MMT. In 2014, we purchased additional interests in MMT, increasing our ownership interest to 99.5%. In connection with the MMJ Acquisition, we recorded net assets of $2.60 billion, noncontrolling interests of $168 million and a gain on the transaction of $1.48 billion in 2013. In the second quarter of 2014, the provisional amounts recorded in connection with the MMJ Acquisition were adjusted, primarily for pre-petition liabilities. As a result, other non-operating expense for 2014 included these measurement period adjustments of $33 million. (See "Item 8. Financial Statements – Notes to Consolidated Financial Statements – Micron Memory Japan, Inc." note.)

The MMJ Acquisition included a 300mm DRAM wafer fabrication facility located in Hiroshima, Japan, a 300mm DRAM wafer fabrication facility in Taichung City, Taiwan and an assembly and test facility located in Akita, Japan. These wafer fabrication facilities together represented approximately 30% of our total wafer capacity for 2014. The MMJ Group's products include mobile DRAM targeted to mobile phones and tablets, and computing DRAM targeted to desktop PCs, servers, notebooks and workstations. The operations from the MMJ Acquisition are included primarily in the MBU and CNBU segments.

Results of Operations

Consolidated Results



For the year ended	2014					2013					2012
Net sales	$	16,358		100	%	$	9,073		100	%	$	8,234		100	%
Cost of goods sold	10,921			67	%	7,226			80	%	7,266			88	%
Gross margin	5,437			33	%	1,847			20	%	968			12	%

SG&A	707			4	%	562			6	%	620			8	%
R&D	1,371			8	%	931			10	%	918			11	%
Restructure and asset impairments	40			—	%	126			1	%	10			—	%
Other operating (income) expense, net	232			1	%	(8		)	—	%	32			—	%
Operating income (loss)	3,087			19	%	236			3	%	(612		)	(7	)%

Gain on MMJ Acquisition	(33		)	—	%	1,484			16	%	—			—	%
Interest income (expense), net	(329		)	(2	)%	(217		)	(2	)%	(171		)	(2	)%
Other non-operating income (expense), net	8			—	%	(218		)	(2	)%	29			—	%
Income tax (provision) benefit	(128		)	(1	)%	(8		)	—	%	17			—	%
Equity in net income (loss) of equity method investees	474			3	%	(83		)	(1	)%	(294		)	(4	)%
Net income attributable to noncontrolling interests	(34		)	—	%	(4		)	—	%	(1		)	—	%
Net income (loss) attributable to Micron	$	3,045		19	%	$	1,190		13	%	$	(1,032	)	(13	)%

Business Segments

We have the following four business units, which are our reportable segments:

Compute and Networking Business Unit ("CNBU"): Includes DRAM and NOR Flash products sold to the compute, networking, graphics and cloud server markets.

Mobile Business Unit ("MBU"): Includes DRAM, NAND Flash and NOR Flash products sold to the smartphone, feature phone and tablet mobile-device market.

Embedded Business Unit ("EBU"): Includes DRAM, NAND Flash and NOR Flash products sold into automotive and industrial applications, as well as the connected home and consumer electronics markets.

Our other operations do not meet the thresholds of a reportable segment and are reported under All Other. In the third quarter of 2014, we reorganized our business units. All prior period amounts reflect this reorganization.

Net Sales



For the year ended	2014				2013				2012
CNBU	$	7,333	45	%	$	3,462	38	%	$	2,667	32	%
MBU	3,627		22	%	1,214		13	%	1,176		14	%
SBU	3,480		21	%	2,824		31	%	2,842		35	%
EBU	1,774		11	%	1,275		14	%	1,097		13	%
All Other	144		1	%	298		4	%	452		6	%
	$	16,358	100	%	$	9,073	100	%	$	8,234	100	%

Total net sales for 2014 increased 80% as compared to 2013 primarily due to higher CNBU and MBU sales resulting from the MMJ Acquisition. Net sales for all segments in 2014 also benefitted, as compared to 2013, from increases in DRAM and NAND Flash sales volumes driven primarily by higher manufacturing output as a result of improvements in product and process technology and an increased share of output from Inotera.

Total net sales for 2013 increased 10% as compared to 2012 reflecting increases in CNBU, EBU and MBU sales primarily due to higher levels of DRAM and NAND Flash gigabit sales volumes partially offset by declines in average selling prices. The increases in gigabit sales volumes for 2013 were primarily attributable to manufacturing efficiencies driven by improvements in product and process technologies, increased DRAM supply from Inotera due to the restructuring of our supply agreement and $355 million of DRAM sales from the MMJ Acquisition after its acquisition on July 31, 2013.

Gross Margin

Our overall gross margin percentage improved to 33% for 2014 from 20% for 2013 primarily due to improvements in the gross margin percentage for CNBU and MBU as a result of higher margins for DRAM products. The gross margin improvements for CNBU and MBU for 2014 as compared to 2013 resulted primarily from the MMJ Acquisition, manufacturing cost reductions and higher average selling prices for CNBU.

Through December 2012, we purchased 50% of Inotera's wafer production capacity based on a margin-sharing formula among Nanya, Inotera and us. Since January 2013, we have purchased substantially all of Inotera's DRAM output at a discount from market prices for our comparable components under a new supply agreement (the "Inotera Supply Agreement"). Our costs for supply from Inotera increased in 2014 from 2013 due to increases in average selling prices for our DRAM products and the changes in the pricing terms. The Inotera Supply Agreement has a three-year term (currently through December 2016) that contemplates annual negotiations with respect to potential successive one-year extensions. If the parties do not agree to an extension, the agreement will terminate following the end of the then-existing term plus a subsequent three-year wind-down period. In the event of a wind-down, our share of Inotera's capacity would decline over the wind-down period. In 2014, our cost of products purchased from Inotera was significantly higher than our cost of similar products manufactured in our wholly-owned facilities. We are currently in negotiations regarding the extension of the Inotera Supply Agreement. There can be no assurance that we will be able to reach an agreement. Under the Inotera supply agreements, we purchased $2.68 billion, $1.26 billion, and $646 million of DRAM products in 2014, 2013 and 2012, respectively.

Our gross margin percentage on sales of DRAM products for 2014 improved from 2013 primarily due to reductions in costs and increases in average selling prices. Cost reductions for 2014 primarily reflected improvements in product and process technologies and the comparatively lower manufacturing costs of the MMJ Group, partially offset by higher costs for product obtained under the Inotera supply agreements. For 2014 and the fourth quarter of 2013, our costs of goods sold for DRAM products included the sale of the MMJ Group's inventories recorded at fair value in the MMJ Acquisition, which was higher than the manufacturing cost of such inventories. This increased our costs of goods sold by approximately $153 million for 2014 and $41 million for 2013.

Our overall gross margin percentage improved to 20% for 2013 from 12% for 2012 due to improvements in the gross margin percentage for CNBU, and to a lesser extent EBU, SBU and MBU, primarily due to manufacturing cost reductions partially offset by declines in average selling prices. Manufacturing cost reductions for 2013 primarily resulted from improvements in product and process technologies.

Operating Results by Business Segments

CNBU



For the year ended	2014		2013		2012
Net sales	$	7,333	$	3,462	$	2,667
Operating income (loss)	1,957		160		(458		)

CNBU sales and operating results track closely with our average selling prices, gigabit sales volumes and cost per gigabit for our consolidated sales of DRAM products. (See "Operating Results by Product – DRAM" for further detail.) CNBU sales for 2014 increased 112% as compared to 2013 primarily due to (1) the MMJ Acquisition, (2) higher average selling prices, (3) increased DRAM supply from Inotera as a result of the restructuring of our supply agreement and (4) higher output due to improvements in product and process technologies. CNBU sales for 2014 as compared to 2013 were adversely impacted by the transition of production at one of our Singapore wafer fabrication facilities from DRAM to NAND Flash. CNBU operating income for 2014 improved from 2013 primarily due to the MMJ Acquisition, higher average selling prices and manufacturing cost reductions.

CNBU sales for 2013 increased 30% as compared to 2012 primarily due to increases in gigabits sold partially offset by declines in average selling prices. CNBU operating margin for 2013 improved from 2012 primarily due to manufacturing cost reductions as a result of improved product and process technologies partially offset by declines in average selling prices. CNBU results of operations for 2013 included sales of $153 million and operating income of $21 million from the acquired MMJ Group. CNBU sales and operating margins for 2012 were adversely impacted by a $58 million charge for a settlement with a customer.

MBU



For the year ended	2014		2013			2012
Net sales	$	3,627	$	1,214		$	1,176
Operating income (loss)	683		(265		)	(371		)

In 2014, MBU sales were comprised primarily of DRAM, NAND Flash and NOR Flash, in decreasing order of revenue, with mobile DRAM products accounting for a significant majority of the sales. MBU sales for 2014 increased 199% as compared to 2013 primarily due significant increases in mobile DRAM sales as a result of the MMJ Acquisition. MBU operating margin for 2014 also improved from 2013 primarily due to the MMJ Acquisition and manufacturing cost reductions, which significantly outpaced declines in average selling prices.

MBU sales increased 3% for 2013 as compared to 2012 primarily due to higher sales of mobile DRAM products as a result of the MMJ Acquisition partially offset by declines in sales of wireless NOR Flash products. MBU results of operations for 2013 included sales of $192 million and operating income of $22 million from the MMJ Group. Sales of wireless NOR Flash products declined in 2014 as a result of weakness in market demand and our customer group in particular, as well as a continued transition by customers to NAND Flash. The improvement in MBU operating margin for 2013 from 2012 was primarily due to reductions in manufacturing, SG&A and R&D costs.

SBU



For the year ended	2014		2013		2012
Net sales	$	3,480	$	2,824	$	2,842
Operating income	255		173		199

SBU sales and operating results track closely with our average selling prices, gigabit sales volumes and cost per gigabit for our sales of NAND Flash products. (See "Operating Results by Product – NAND Flash" for further detail.) SBU sales for 2014 increased 23% from 2013 primarily due to increases in gigabits sold partially offset by declines in average selling prices. Increases in gigabits sold for 2014 were primarily due to the transition in 2014 of production at one of our wafer fabrication facilities in Singapore from DRAM to NAND Flash and improvements in product and process technologies. SBU sells a portion of its products to Intel through our IMFT joint venture at long-term negotiated prices approximating cost. SBU sales of NAND Flash products to Intel under this arrangement were $423 million, $387 million and $718 million for 2014, 2013 and 2012, respectively. All other SBU products are sold to OEMs, resellers, retailers and other customers (including Intel), which we collectively refer to as "trade customers."

SBU sales of NAND Flash products to trade customers for 2014 increased 26% as compared to 2013 primarily due to an increase in gigabits sold partially offset by declines in average selling prices. SBU operating income for 2014 improved from 2013 primarily due to higher gigabit sales volumes as manufacturing cost reductions were essentially offset by declines in average selling prices.

SBU sales for 2013 were relatively unchanged from 2012 as increases in gigabits sold were partially offset by declines in average selling prices. Increases in gigabits sold for 2013 were primarily due to improvements in product and process technologies. SBU sales of NAND Flash products to trade customers for 2013 increased 22% as compared to 2012 primarily due to increases in gigabits sold partially offset by declines in average selling prices. On April 6, 2012, we acquired Intel's interests and supply rights from IM Flash wafer fabrication facilities in Singapore and Virginia, resulting in subsequent increases in our sales to trade customers. SBU operating income for 2013 declined from 2012 primarily due to decreases in average selling prices and increases in R&D costs mitigated by manufacturing cost reductions. Manufacturing cost reductions resulted primarily from improvements in product and process technologies.

EBU



For the year ended	2014		2013		2012
Net sales	$	1,774	$	1,275	$	1,097
Operating income	331		227		129

In 2014, EBU sales were comprised of DRAM, NAND Flash and NOR Flash in decreasing order of revenue. EBU sales for 2014 increased 39% as compared to 2013 primarily due to increased sales volumes of DRAM and NAND Flash products partially offset by declines in average selling prices. EBU operating income for 2014 improved as compared to 2013 primarily due to higher margins on sales of DRAM and NAND Flash products as a result of the increase in sales and cost reductions.

In 2013, EBU sales were comprised of DRAM, NOR Flash and NAND Flash in decreasing order of revenue. EBU sales increased 16% for 2013 as compared to 2012 primarily due to increased sales volumes of DRAM, NAND Flash and NOR Flash products as EBU continued to expand its customer base, partially offset by declines in average selling prices. EBU operating income for 2013 improved from 2012 primarily due to manufacturing cost reductions and higher sales volumes partially offset by declines in average selling prices.

Operating Results by Product

Net Sales by Product



For the year ended	2014				2013				2012
DRAM	$	11,164	68	%	$	4,361	48	%	$	3,178	39	%
NAND Flash	4,468		27	%	3,589		40	%	3,627		44	%
NOR Flash	505		3	%	792		9	%	977		12	%
Other	221		2	%	331		3	%	452		5	%
	$	16,358	100	%	$	9,073	100	%	$	8,234	100	%

In order to balance our future product mix in anticipation of the closing of the MMJ Acquisition, in the fourth quarter of 2013, we began to transition production at one of our wafer fabrication facilities in Singapore from DRAM to NAND Flash. This transition to NAND Flash production is substantially complete. During this period of transition, there was a marginal reduction in wafer production.

DRAM



For the year ended	2014		2013

	(percentage change from prior period)
Net sales	156	%	37	%
Average selling prices per gigabit	6	%	(11	)%
Gigabits sold	142	%	55	%
Cost per gigabit	(20	)%	(25	)%

The increase in gigabit sales of DRAM products for 2014 as compared to 2013 was primarily due to higher production volumes resulting from the MMJ Acquisition, increased supply under the new Inotera Supply Agreement and improved product and process technologies, partially offset by the transition of one of our wafer fabrication facilities in Singapore from DRAM to NAND Flash. In 2014, DRAM products produced by our MMJ Group facilities constituted 54% of our aggregate DRAM gigabit production as compared to 9% in 2013.

In 2014, our cost of products purchased from Inotera was significantly higher than our cost of similar products manufactured in our wholly-owned facilities and were higher than our costs in 2013. DRAM products acquired from Inotera accounted for 38% of our DRAM gigabit production for 2014 as compared to 54% for 2013 and 46% for 2012.

The increase in gigabit sales of DRAM products for 2013 as compared to 2012 was primarily due to increased output obtained from our Inotera joint venture under the new supply agreement, improved product and process technologies and the MMJ Acquisition on July 31, 2013. Our gross margin percentage on sales of DRAM products for 2013 improved from 2012 primarily due to manufacturing cost reductions as a result of improvements in product and process technologies partially offset by declines in average selling prices. DRAM sales and gross margins for 2012 were adversely impacted by the effects of a $58 million charge to revenue for a settlement with a customer.

NAND Flash

We sell a portion of our output of NAND Flash products to Intel through IMFT at long-term negotiated prices approximating cost. (See "Operating Results by Business Segments – Storage Business Unit" for further detail.) We sell the remainder of our NAND Flash products to trade customers.



For the year ended	2014		2013

	(percentage change from prior period)
Sales to trade customers:
Net sales	27	%	15	%
Average selling prices per gigabit	(23	)%	(18	)%
Gigabits sold	65	%	40	%
Cost per gigabit	(23	)%	(22	)%

Increases in NAND Flash gigabits sold to trade customers for 2014 as compared to 2013 were primarily due to the transition of one of our wafer fabrication facilities in Singapore from DRAM to NAND Flash production and improved product and process technologies. Our gross margin percentage on sales of trade NAND Flash products for 2014 was relatively unchanged from 2013 as manufacturing cost reductions offset declines in average selling prices. Manufacturing cost reductions for 2014 as compared to 2013 primarily resulted from improvements in product and process technologies.

Increases in NAND Flash gigabits sold to trade customers for 2013 as compared to 2012 were primarily due to improved product and process technologies, increased output available for sale to trade customers due to the restructure of our IM Flash agreement with Intel in April 2012 and the ramp-up of our fabrication facility in Singapore throughout 2012. Our gross margin percentage on sales of NAND Flash products for 2013 improved from 2012 as manufacturing cost reductions outpaced declines in average selling prices. Manufacturing cost reductions for 2013 as compared to 2012 reflect improvements in product and process technologies.

NOR Flash

Sales of NOR Flash products for 2014 declined as compared to 2013 primarily due to decreases in sales of wireless NOR Flash products as a result of the continued transition of wireless applications to NAND Flash products. Our gross margin percentage on sales of NOR Flash products for 2014 declined as compared to 2013 primarily due to costs of underutilized capacity in connection with the decrease in production of wireless products and decreases in average selling prices.

Sales of NOR Flash products for 2013 declined as compared to 2012 primarily due to decreases in sales of wireless NOR Flash products as a result of weakness in demand from certain customers and the continued transition of wireless applications to NAND Flash products, which led to significant declines in average selling prices. Our gross margin percentage on sales of NOR Flash products for 2013 improved as compared to 2012 primarily due to cost reductions.

Operating Expenses and Other

Selling, General and Administrative

SG&A expenses for 2014 increased 26% as compared to 2013 primarily due to the incremental costs resulting from the MMJ Acquisition and higher payroll costs resulting primarily from the reinstatement of variable pay plans. We expect that SG&A expenses will approximate $195 million to $205 million for the first quarter of 2015.

SG&A expenses for 2013 decreased 9% as compared to 2012 primarily due to a reduction in legal costs and lower variable pay costs partially offset by $50 million of consulting and other costs incurred in connection with the MMJ Acquisition.

Research and Development

R&D expenses for 2014 increased 47% from 2013 primarily due to the incremental costs resulting from the MMJ Acquisition, higher payroll costs resulting primarily from the reinstatement of variable pay plans and increased resources dedicated to development efforts. We expect that R&D expenses, net of amounts reimbursable from our R&D partners, will be approximately $395 million to $405 million for the first quarter of 2015.

R&D expenses for 2013 increased 1% from 2012 primarily due to lower reimbursements from Nanya under partnering arrangements offset by lower payroll costs primarily resulting from the suspension of variable pay plans and a lower volume of development wafers processed.

As a result of amounts reimbursable from Intel under a joint development program for NAND Flash and certain emerging memory technologies, R&D expenses were reduced by $137 million, $127 million and $87 million for 2014, 2013 and 2012, respectively. As a result of amounts reimbursable from Nanya under a DRAM R&D joint development program, R&D expenses were reduced by $19 million and $138 million for 2013 and 2012, respectively. Effective January 1, 2013, Nanya ceased participating in the DRAM joint development program.

Our process technology R&D efforts are focused primarily on development of successively smaller line-width process technologies which are designed to facilitate our transition to next generation memory products. Additional process technology R&D efforts focus on the enablement of advanced computing and mobile memory architectures, the investigation of new opportunities that leverage our core semiconductor expertise and the development of new manufacturing materials. Product design and development efforts include our high density DDR3 and DDR4 DRAM, Mobile LPDRAM products, high density NAND Flash memory (including 3D NAND and MLC and TLC technologies), SSDs, Hybrid Memory Cubes, specialty memory, NOR Flash memory, and other memory technologies and systems.

Restructure and Asset Impairments



For the year ended	2014			2013			2012
Loss on impairment of LED assets	$	(6	)	$	33		$	—
Loss on impairment of MIT assets	(5		)	62			—
Gain on termination of lease to Transform	—			(25		)	—
Loss on restructure of ST consortium agreement	—			26			—
Other	51			30			10
	$	40		$	126		$	10

In order to optimize operations, improve efficiency and increase our focus on our core memory operations, we have entered into various restructure activities. For 2014 and 2013, other restructure included charges associated with our efforts to wind down our 200mm operations primarily in Agrate, Italy and Kiryat Gat, Israel and charges associated with workforce optimization activities, primarily related to our MBU and EBU operating segments. As of August 28, 2014, we had accrued $14 million for unpaid other restructure activities related to our workforce optimization activity. As of August 28, 2014, we do not anticipate incurring any significant additional costs for these restructure activities. (See "Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Restructure and Asset Impairments.")

Interest Income (Expense)

Net interest expense for 2014, 2013 and 2012, included aggregate amounts of amortization of debt discount and other costs of $167 million, $122 million and $81 million, respectively.

Income Taxes

Income tax provision (benefit) for 2014 included $249 million of expenses related to the utilization of deferred tax assets by the MMJ Group partially offset by a $190 million benefit from increases in amount of MMJ Group's deferred tax assets expected to be realized based on our forecasted utilization of net operating losses. The remaining tax provision for 2014 primarily reflects taxes on our other non-U.S. operations. The provision (benefit) for taxes on U.S. operations for 2014 was substantially offset by changes in the valuation allowance. As of August 28, 2014, we had valuation allowances of $1.29 billion against substantially all U.S. net deferred tax assets and $1.15 billion related to our foreign subsidiaries, primarily related to net operating loss carryforwards. Our valuation allowance decreased $712 million for 2014 primarily due to the utilization of U.S. and foreign net operating losses and due to the $190 million benefit to deferred tax assets of the MMJ Group. The amount of the deferred tax asset considered realizable could be adjusted if significant positive evidence increases. Management continues to evaluate future financial performance to determine whether such performance is sufficient evidence to support reversal of the valuation allowances. Our unrecognized tax benefits increased $150 million in 2014, primarily due to transfer pricing and other matters, which was substantially offset by changes in our deferred tax asset valuation allowance.

We currently operate in several tax jurisdictions where we have arrangements that allow us to compute our tax provision at rates below the local statutory rates that expire in whole or in part at various dates through 2026. These arrangements benefitted our tax provision in 2014, 2013 and 2012 by $286 million, $141 million and $52 million, respectively.

Income taxes for 2013 and 2012 primarily reflect taxes on our non-U.S. operations offset by benefits of $19 million and $56 million, respectively, from the favorable resolution of prior year tax matters and a change in tax laws applicable to prior years.

(See "Item 8. Financial Statements and Supplementary Data - Notes to Consolidated Financial Statements - Income Taxes.")

Equity in Net Income (Loss) of Equity Method Investees

We recognize our share of earnings or losses from the entities listed below under the equity method, generally on a two-month lag. Equity in net income (loss) of equity method investees, net of tax, included the following:



For the year ended	2014			2013			2012
Inotera	$	465		$	(79	)	$	(189	)
Tera Probe	11			—			—
Other	(2		)	(4		)	(105		)
	$	474		$	(83	)	$	(294	)

Our equity in net income (loss) of Inotera improved for 2014 as compared to 2013 primarily due to Inotera's improved operating results as a result of higher selling prices and lower manufacturing costs. Higher selling prices resulted from the new Inotera Supply Agreement coupled with an improved market.

Losses in 2012 for our other equity method investments were primarily attributable to Transform Solar Pty Ltd. As of August 30, 2012, Transform's operations were substantially discontinued. (See "Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Equity Method Investments.")

Other Operating and Non-Operating

In 2014, we settled all pending litigation between us and Rambus, including all antitrust and patent matters, and entered into a patent cross-license agreement. As a result, other operating expense for 2014 included a $233 million charge to accrue a liability, which reflects the discounted value of amounts due under this arrangement. (See "Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Contingencies" note.)

Other non-operating expense for 2014 included losses from the restructure of our debt of $184 million. Other non-operating expense for 2013 included losses of $31 million from the restructure of our debt. (See "Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Debt" note.)

Other non-operating expense included losses from changes in currency exchange rates of $28 million, $229 million and $6 million for 2014, 2013 and 2012, respectively. The loss for 2013 includes a $228 million loss for currency contracts to hedge our yen-denominated obligations in connection with the MMJ Acquisition. (See "Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Derivative Instruments" note.)

On August 15, 2014, ON Semiconductor Corporation acquired Aptina for approximately $433 million and we recognized a non-operating gain of $119 million on the sale of our shares based on our diluted ownership interest of approximately 27%.

On May 15, 2014, Inotera issued 400 million common shares in a public offering at a price equal to 31.50 New Taiwan dollars per share, which was in excess of our carrying value per share. As a result of the issuance, our ownership interest decreased from 35% to 33% and we recognized a non-operating gain of $93 million in 2014.

Further discussion of other operating and non-operating income and expenses can be found in the following notes contained in "Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements":


•	Equity Plans


•	Other Operating (Income) Expense, Net


•	Other Non-Operating Income (Expense), Net

Liquidity and Capital Resources

Our primary sources of liquidity are cash generated from operations and financing obtained from capital markets. Specifically, in 2014, we generated cash from operations of $5.70 billion and obtained $2.21 billion of proceeds from issuance of debt. Cash generated from operations is highly dependent on selling prices for our products, which can vary significantly from period to period. We are continuously evaluating alternatives for efficiently financing our capital expenditures, dilution-management activities (including repurchases of convertible notes or equity) and ongoing operations. We expect, from time to time in the future, to engage in a variety of transactions for such purposes, including the issuance or incurrence of secured and unsecured debt and the refinancing and restructuring of existing debt.

On October 27, 2014, we announced that our Board of Directors authorized the discretionary repurchase of up to

$1.00 billion of our outstanding common stock. Any repurchases under the new authorization may be made in open market purchases, block trades, privately negotiated transactions and/or derivative transactions, subject to market conditions and our ongoing determination that it is the best use of available cash. We expect to use cash on hand to fund any repurchases. The repurchase authorization does not obligate us to acquire any common stock.

We expect that our cash and investments, cash flows from operations and available financing will be sufficient to meet our requirements at least through 2015.



As of	2014		2013
Cash and equivalents and short-term investments:
Bank deposits	$	2,445	$	1,619
Money market funds	1,281		1,188
Certificates of deposit	410		47
Corporate bonds	154		112
Government securities	136		72
Commercial paper	107		61
Asset-backed securities	1		2
	$	4,534	$	3,101

Long-term marketable investments	$	819	$	499

As of August 28, 2014, $2.80 billion of our cash and equivalents and short-term investments was held by foreign subsidiaries, of which $758 million was denominated in currencies other than the U.S. dollar. To mitigate credit risk, we invest through high-credit-quality financial institutions and, by policy, generally limit the concentration of credit exposure by restricting the amount of investments with any single obligor.

Limitations on the Use of Cash and Investments

MMJ Group: Cash and equivalents and short-term investments in the table above included an aggregate of $1.60 billion held by the MMJ Group as of August 28, 2014. As a result of the corporate reorganization proceedings of the MMJ Companies entered into in March 2012 and for so long as such proceedings are continuing, the MMJ Companies and their subsidiaries are subject to certain restrictions on dividends, loans and advances. The plans of reorganization of the MMJ Companies prohibit the MMJ Companies from paying dividends, including any cash dividends, to us and require that excess earnings be used in their businesses or to fund the MMJ Companies' installment payments. These prohibitions also effectively prevent the subsidiaries of the MMJ Companies from paying cash dividends to us as any such dividends would have to be first paid to the MMJ Companies which are prohibited from repaying those amounts to us as dividends under the plans of reorganization. In addition, pursuant to an order of the Japan Court, the MMJ Companies cannot make loans or advances, other than certain ordinary course advances, to us without the consent of the Japan Court. Moreover, loans or advances by subsidiaries of the MMJ Companies may be considered outside of the ordinary course of business and subject to approval of the legal trustee and Japan Court. As a result, the assets of the MMJ Group, while available to satisfy the MMJ Companies' installment payments and the other obligations, capital expenditures and other operating needs of the MMJ Group, are not available for use by us in our other operations. Moreover, certain uses of the assets of the MMJ Group, including investments in certain capital expenditures and in MMT, may require consent of MMJ's trustees and/or the Japan Court.

IMFT: Cash and equivalents and short-term investments in the table above included $84 million held by IMFT as of August 28, 2014. Our ability to access funds held by IMFT to finance our other operations is subject to agreement by Intel and contractual limitations. Amounts held by IMFT are not anticipated to be available to finance our other operations.

Indefinitely Reinvested: As of August 28, 2014, we had $2.70 billion of cash and equivalents and short-term investments that were held by foreign subsidiaries whose earnings were considered to be indefinitely reinvested and repatriation of these funds to the U.S. would subject these funds to U.S. federal income taxes. Determination of the amount of unrecognized deferred tax liabilities related to investments in these foreign subsidiaries is not practicable.

Operating Activities

Net cash provided by operating activities was $5.70 billion for 2014, due primarily to a strong market for our products and our continued focus on cost-efficient operations. Operating cash flows in 2014 also benefitted by a $671 million increase in accounts payable and accrued expenses offset by a $518 million increase in receivables.

Investing Activities

Net cash used for investing activities was $2.45 billion for 2014, which consisted primarily of cash expenditures of $2.66 billion for property plant and equipment and $506 million for the acquisition of available-for-sale securities (net of proceeds from sales and maturities of $557 million) offset by the use of $534 million of restricted cash in connection with the first MMJ creditor installment payment.

We believe that to develop new product and process technologies, support future growth, achieve operating efficiencies and maintain product quality, we must continue to invest in manufacturing technologies, facilities and capital equipment, and R&D. We estimate that capital spending for 2015 will be approximately $3.6 billion to $4.0 billion. The actual amounts for 2015 will vary depending on market conditions. As of August 28, 2014, we had commitments of approximately $1.18 billion for the acquisition of property, plant and equipment, substantially all of which is expected to be paid within one year.

Financing Activities

Net cash used by financing activities was $1.95 billion for 2014, which included $3.84 billion for repayments of debt (including $1.20 billion for the amount in excess of principal of our convertible notes), $479 million of payments on equipment purchase contracts and $92 million of net cash received from noncontrolling interests offset by $2.21 billion of proceeds from issuance of debt and by $265 million of proceeds from issuance of common stock under our equity plans.

2014 Debt Restructure

Throughout 2014, we reduced the dilutive effects of our convertible notes by exchanging, converting or repurchasing a portion of these notes using cash generated from operations and proceeds from issuing non-convertible debt with near investment-grade covenants. Approximately 90% of our Free Cash Flow (cash flows from operating activities less expenditures for property, plant and equipment less payments on equipment purchase contracts) generated during 2014 was used for these dilution-management activities. As a result, we eliminated convertible notes that would have been converted into 118 million shares of our common stock.

In 2014, we initiated a series of actions to restructure our debt, including exchanges, conversions and settlements, repurchases, issuances and early repayments. The following table presents the net effect of each of the actions:



	Increase (Decrease) in Principal			Increase (Decrease) in Carrying Value			Increase (Decrease) in Cash			(Decrease) in Equity			Loss⁽¹⁾
Exchanges	$	585		$	282		$	—		$	(238	)	$	49
Conversions and settlements⁽²⁾	(770		)	(437		)	(1,446		)	(886		)	130
Repurchases	(320		)	(269		)	(857		)	(567		)	23
Issuances	2,212			2,212			2,157			—			—
Early repayments	(336		)	(334		)	(339		)	—			3
	$	1,371		$	1,454		$	(485	)	$	(1,691	)	$	205


⁽¹⁾	The loss on 2014 debt restructure activities was recorded as $184 million in other non-operating expense and $21 million in interest expense in 2014.

⁽²⁾ The change in carrying value includes an increase of $275 million for the reclassification of the fair value of the equity component to debt in connection with our election to settle the conversions of the 2031B Notes in cash.


•	Exchanges: Exchanged $440 million in aggregate principal amount of our 2027 Notes, 2031A Notes and 2031B Notes into $1.03 billion principal amount at maturity of 2043G Notes.


•	Conversions and Settlement: Holders of substantially all of our remaining 2014 Notes, 2027 Notes and 2031A Notes (with an aggregate principal amount of $770 million) converted their notes and we settled the conversions in cash for $1.45 billion.


•	Repurchases: Repurchased $320 million in aggregate principal amount of our 2031B Notes, 2032C Notes and 2032D Notes in privately-negotiated transactions for an aggregate of $857 million in cash.


•	Issuances: Issued $600 million in principal amount of 5.875% senior notes due February 2022 and $1.15 billion in principal amount of 5.500% senior notes due February 2025. Issued $462 million in principal amount of 1.258% senior notes due 2019 Notes, payable in 10 semi-annual installments commencing in July 2014.


•	Early Repayments: Repaid $334 million of notes and capital leases prior to their scheduled maturities.

Subsequent to 2014, we settled an aggregate principal amount of $114 million of our remaining 2031B Notes for $389 million and repaid a $120 million note prior to its scheduled maturity.

Available Credit Facilities: As of August 28, 2014, we had credit facilities available that provide for up to $408 million of additional financing, subject to outstanding balances of trade receivables and other conditions.

(See "Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Debt" note.)

Potential Settlement Obligations of Convertible Notes

Since the closing price of our common stock for at least 20 trading days in the 30 trading day periods ended on June 30, 2014 and September 30, 2014 exceeded 130% of the initial conversion price per share of our 2032 Notes and 2033 Notes, holders of those notes have the right to convert their notes at any time through December 31, 2014. For our convertible notes, we have: (1) the requirement to pay cash for the principal amount and the option to pay either cash, shares of our common stock or any combination thereof for any remaining conversion obligation, or (2) the option to pay cash, issue shares of common stock or any combination thereof for the aggregate amount due upon conversion.

The following table summarizes the potential settlements, as of August 28, 2014, that we could be required to make if all holders converted their 2032 Notes and 2033 Notes:



	Initial Conversion Price Per Share		Settlement Option for Principal Amount	Outstanding Principal		If Settled With Minimum Cash Required⁽¹⁾			If Settled Entirely With Cash⁽²⁾
	Initial Conversion Price Per Share		Settlement Option for Principal Amount	Outstanding Principal		Cash		Remainder in Shares	Cash
2032C Notes	$	9.63	Cash and/or shares	$	362	$	—	38	$	1,235
2032D Notes	9.98		Cash and/or shares	344		—		34	1,129
2033E Notes	10.93		Cash	300		300		18	900
2033F Notes	10.93		Cash	300		300		18	900
				$	1,306	$	600	108	$	4,164


⁽¹⁾	We are required to settle the principal amount of the 2033 Notes in cash. The remaining conversion obligation paid in shares is based on our closing share price of $32.81 as of August 28, 2014.


⁽²⁾	Based on our closing share price of $32.81 as of August 28, 2014. Assumes we elect cash settlement for the entire obligation.

Contractual Obligations



	Payments Due by Period
As of August 28, 2014	Total		Less than 1 year		1-3 years		3-5 years		More than 5 years
Notes payable⁽¹⁾⁽²⁾	$	7,959	$	976	$	1,001	$	1,601	$	4,381
Capital lease obligations⁽²⁾	998		356		404		115		123
Operating leases⁽³⁾	116		22		32		25		37
Purchase obligations	1,869		1,724		117		12		16
Other long-term liabilities⁽⁴⁾⁽⁵⁾	1,060		335		411		206		108
Total	$	12,002	$	3,413	$	1,965	$	1,959	$	4,665

⁽¹⁾ Amounts include MMJ Creditor Installment Payments, convertible notes and other notes. Any future redemption or conversion of convertible debt could impact the amount and timing of our cash payments.

⁽²⁾ Amounts reflect principal and interest.

⁽³⁾ Amounts do not include contingent lease payments.

⁽⁴⁾ Amounts represent future cash payments to satisfy other long-term liabilities recorded on our consolidated balance sheet, including $335 million for the current portion of these long-term liabilities.

⁽⁵⁾ We are unable to reliably estimate the timing of future payments related to uncertain tax positions and noncurrent deferred tax liabilities; therefore, $255 million in aggregate of long-term income taxes payable and noncurrent deferred tax liabilities has been excluded from the preceding table. However, other noncurrent liabilities recorded on our consolidated balance sheet included these uncertain tax positions and noncurrent deferred tax liabilities.

The obligations disclosed above do not include current liabilities, except for the current portion of long-term debt. The expected timing of payment amounts of the obligations discussed above is estimated based on current information. Timing and actual amounts paid may differ depending on the timing of receipt of goods or services, market prices, changes to agreed-upon amounts or timing of certain events for some obligations.

Purchase obligations include all commitments to purchase goods or services of either a fixed or minimum quantity that meet any of the following criteria: (1) they are noncancellable, (2) we would incur a penalty if the agreement was canceled, or (3) we must make specified minimum payments even if we do not take delivery of the contracted products or services ("take-or-pay"). If the obligation to purchase goods or services is noncancellable, the entire value of the contract was included in the above table. If the obligation is cancellable, but we would incur a penalty if canceled, the dollar amount of the penalty was included as a purchase obligation. Contracted minimum amounts specified in take-or-pay contracts are also included in the above table as they represent the portion of each contract that is a firm commitment.

Under the Inotera Supply Agreement, effective on January 1, 2013, we are obligated to purchase for a three-year term (currently through December 2016) substantially all of Inotera's output at a purchase price based on a discount from market prices for our comparable components. The Inotera Supply Agreement contemplates annual negotiations with respect to potential successive one-year extensions, and if the parties do not agree to an extension, the agreement will terminate following the end of the then-existing term plus a subsequent three-year wind-down period. In the event of a wind-down, our share of Inotera's capacity would decline over the three year wind-down period. We purchased $2.68 billion of DRAM products from Inotera in 2014 under the Inotera Supply Agreement. The Inotera Supply Agreement does not contain a fixed or minimum purchase quantity as quantities are based on qualified production output and pricing fluctuates as it is based on market prices. Therefore, we did not include our obligations under the Inotera Supply Agreement in the contractual obligations table above.

Off-Balance Sheet Arrangements

We have entered into capped calls, which are intended to reduce the effect of potential dilution from our convertible notes. The capped calls provide for our receipt of cash or shares, at our election, from our counterparties if the trading price of our stock is above a specified initial strike price at the expiration dates. The amounts receivable varies based on the trading price of our stock, up to specified cap prices. The dollar value of the cash or shares that we would receive from the capped calls on their expiration dates ranges from $0 if the trading price of our stock is below the initial strike price for all of the capped calls to $864 million if the trading price of our stock is at or above the cap price for all of the capped calls. To purchase the capped calls, we paid $57 million in 2011, $103 million in 2012 and $48 million in 2013, respectively. The amounts paid were recorded as charges to additional capital. For further details of our capped call arrangements, see "Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Equity – Micron Shareholders' Equity – Capped Calls" note.

Critical Accounting Estimates

The preparation of financial statements and related disclosures in conformity with U.S. GAAP requires management to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, expenses and related disclosures. Estimates and judgments are based on historical experience, forecasted events and various other assumptions that we believe to be reasonable under the circumstances. Estimates and judgments may vary under different assumptions or conditions. We evaluate our estimates and judgments on an ongoing basis. Our management believes the accounting policies below are critical in the portrayal of our financial condition and results of operations and requires management's most difficult, subjective or complex judgments.

Business Acquisitions: Accounting for acquisitions requires us to estimate the fair value of consideration paid and the individual assets and liabilities acquired, which involves a number of judgments, assumptions and estimates that could materially affect the amount and timing of costs recognized. Accounting for acquisitions can also involve significant judgment to determine when control of the acquired entity is transferred. We typically obtain independent third party valuation studies to assist in determining fair values, including assistance in determining future cash flows, appropriate discount rates and comparable market values. The items involving the most significant assumptions, estimates and judgments included determining the fair value of the following:


•	Property, plant and equipment, including determination of values in a continued-use model;


•	Deferred tax assets, including projections of future taxable income and tax rates;


•	Inventory, including estimated future selling prices, timing of product sales and completion costs for work in process; and


•	Debt, including discount rate and timing of payments.

Consolidations: We have interests in joint venture entities that are VIEs. Determining whether to consolidate a VIE requires judgment in assessing (1) whether an entity is a VIE and (2) if we are the entity's primary beneficiary. To determine if we are the primary beneficiary of a VIE, we evaluate whether we have (a) the power to direct the activities that most significantly impact the VIE's economic performance and (b) the obligation to absorb losses or the right to receive benefits of the VIE that could potentially be significant to the VIE. Our evaluation includes identification of significant activities and an assessment of our ability to direct those activities based on governance provisions and arrangements to provide or receive product and process technology, product supply, operations services, equity funding and financing and other applicable agreements and circumstances. Our assessment of whether we are the primary beneficiary of our VIEs requires significant assumptions and judgment.

Contingencies: We are subject to the possibility of losses from various contingencies. Considerable judgment is necessary to estimate the probability and amount of any loss from such contingencies. An accrual is made when it is probable that a liability has been incurred or an asset has been impaired and the amount of loss can be reasonably estimated. We accrue a liability and charge operations for the estimated costs of adjudication or settlement of asserted and unasserted claims existing as of the balance sheet date. In accounting for the resolution of contingencies, considerable judgment is necessary to estimate amounts pertaining to periods prior to the resolution, which are charged to operations in the period of resolution, and amounts related to future periods.

Income Taxes: We are required to estimate our provision for income taxes and amounts ultimately payable or recoverable in numerous tax jurisdictions around the world. These estimates involve judgment and interpretations of regulations and are inherently complex. Resolution of income tax treatments in individual jurisdictions may not be known for many years after completion of any fiscal year. We are also required to evaluate the realizability of our deferred tax assets on an ongoing basis in accordance with U.S. GAAP, which requires the assessment of our performance and other relevant factors. Realization of deferred tax assets is dependent on our ability to generate future taxable income. In recent periods, our results of operations have benefitted from increases in the amount of deferred taxes we expect to realize, primarily from the levels of capital spending and increases in the amount of taxable income we expect to realize in Japan and Taiwan. Our income tax provision or benefit is dependent, in part, on our ability to forecast future taxable income in these and other jurisdictions. Such forecasts are inherently difficult and involve numerous judgments including, among others, projecting future average selling prices and sales volumes, manufacturing and overhead costs, levels of capital spending and other factors that significantly impact our analyses of the amount of net deferred tax assets that are more likely than not to be realized.

Inventories: Inventories are stated at the lower of average cost or market value. Cost includes labor, material and overhead costs, including product and process technology costs. Determining market value of inventories involves numerous judgments, including projecting average selling prices and sales volumes for future periods and costs to complete products in work in process inventories. To project average selling prices and sales volumes, we review recent sales volumes, existing customer orders, current contract prices, industry analyses of supply and demand, seasonal factors, general economic trends and other information. When these analyses reflect estimated market values below our manufacturing costs, we record a charge to cost of goods sold in advance of when the inventory is actually sold. Differences in forecasted average selling prices used in calculating lower of cost or market adjustments can result in significant changes in the estimated net realizable value of product inventories and accordingly the amount of write-down recorded. For example, a 5% variance in the estimated selling prices would have changed the estimated market value of our memory inventory by approximately $254 million as of August 28, 2014. Due to the volatile nature of the semiconductor memory industry, actual selling prices and volumes often vary significantly from projected prices and volumes and, as a result, the timing of when product costs are charged to operations can vary significantly.

U.S. GAAP provides for products to be grouped into categories in order to compare costs to market values. The amount of any inventory write-down can vary significantly depending on the determination of inventory categories. Inventories are primarily categorized as memory (including DRAM, NAND Flash and NOR Flash) for purposes of determining lower of average cost or market. The major characteristics we consider in determining inventory categories are product type and markets.

Property, Plant and Equipment: We review the carrying value of property, plant and equipment for impairment when events and circumstances indicate that the carrying value of an asset or group of assets may not be recoverable from the estimated future cash flows expected to result from its use and/or disposition. In cases where undiscounted expected future cash flows are less than the carrying value, an impairment loss is recognized equal to the amount by which the carrying value exceeds the estimated fair value of the assets. The estimation of future cash flows involves numerous assumptions which require judgment by us, including, but not limited to, future use of the assets for our operations versus sale or disposal of the assets, future selling prices for our products and future production and sales volumes. In addition, judgment is required in determining the groups of assets for which impairment tests are separately performed.

Research and Development: Costs related to the conceptual formulation and design of products and processes are expensed as R&D as incurred. Determining when product development is complete requires judgment by us. We deem development of a product complete once the product has been thoroughly reviewed and tested for performance and reliability. Subsequent to product qualification, product costs are valued in inventory.

Stock-based Compensation: Stock-based compensation is estimated at the grant date based on the fair value of the award and is recognized as expense using the straight-line amortization method over the requisite service period. For performance-based stock awards, the expense recognized is dependent on the probability of the performance measure being achieved. We utilize forecasts of future performance to assess these probabilities and this assessment requires considerable judgment.

Determining the appropriate fair-value model and calculating the fair value of stock-based awards at the grant date requires considerable judgment, including estimating stock price volatility, expected option life and forfeiture rates. We develop these estimates based on historical data and market information which can change significantly over time. A small change in the estimates used can result in a relatively large change in the estimated valuation. We use the Black-Scholes option valuation model to value employee stock awards. We estimate stock price volatility based on an average of its historical volatility and the implied volatility derived from traded options on our stock.

Recently Issued Accounting Standards

See "Item 8. Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Recently Issued Accounting Standards" note.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Interest Rate Risk

We are exposed to interest rate risk related to our indebtedness and our investment portfolio. Substantially all of our indebtedness is at fixed interest rates. As a result, the fair value of our debt fluctuates based on changes in market interest rates. We estimate that, as of August 28, 2014 and August 29, 2013, a hypothetical decrease in market interest rates of 1% would increase the fair value of our convertible notes and other notes by approximately $250 million and $147 million, respectively. The increase in interest expense caused by a 1% increase in the interest rates of our variable-rate debt would not be significant.

As of August 28, 2014 and August 29, 2013, we held debt securities of $1,653 million and $787 million, respectively, that were subject to interest rate risk. We estimate that a 0.5% increase in market interest rates would decrease the fair value of these instruments by approximately $6 million as of August 28, 2014 and $4 million as of August 29, 2013.

Foreign Currency Exchange Rate Risk

The information in this section should be read in conjunction with the information related to changes in the exchange rates of foreign currency in "Item 1A. Risk Factors." Changes in foreign currency exchange rates could materially adversely affect our results of operations or financial condition.

The functional currency for all of our operations is the U.S. dollar. As a result of our foreign operations, we incur costs and carry certain assets and liabilities that are denominated in foreign currencies. The substantial majority of our revenues are transacted in the U.S. dollar; however, significant amounts of our operating expenditures and capital purchases are incurred in or exposed to other currencies, primarily the euro, the shekel, the Singapore dollar, the New Taiwan dollar, the yen and the yuan. We have established currency risk management programs for our operating expenditures and capital purchases to hedge against fluctuations in fair value and the volatility of future cash flows caused by changes in exchange rates. We utilize currency forward and option contracts in these hedging programs. Our hedging programs reduce, but do not always entirely eliminate, the impact of currency exchange rate movements. We do not use derivative financial instruments for trading or speculative purposes.

To hedge our exposure to changes in currency exchange rates from our monetary assets and liabilities, we utilize a rolling hedge strategy with currency forward contracts that generally mature within 35 days. Based on our foreign currency exposures from monetary assets and liabilities, offset by balance sheet hedges, we estimate that a 10% adverse change in exchange rates versus the U.S. dollar would result in losses of approximately $7 million as of August 28, 2014 and $19 million as of August 29, 2013. To hedge the exposure of changes in cash flows from changes in currency exchange rates for certain capital expenditures and forecasted operating cash flows, we utilize currency forward contracts that generally mature within 12 months and currency options that generally mature within 12 to 18 months.

As of August 28, 2018, under the terms and conditions of the MMJ Companies' plans of reorganization, we are obligated to pay 142 billion yen (or the equivalent of $1.37 billion based on exchange rates as of August 28, 2014) to the external creditors of the MMJ Companies. The installment payments are due at the end of each calendar year beginning in 2014 through 2019. To mitigate the risk that increases in exchange rates have on the payments due in 2014 and 2015, we entered into forward contracts to purchase 20 billion yen on November 28, 2014 and 10 billion yen on November 27, 2015. In addition, the MMJ Companies' cash and equivalent balances in yen mitigate the foreign currency exchange risk associated with the remaining installment payments due in 2015 and after. (See "Item 8 – Financial Statements and Supplementary Data – Notes to Consolidated Financial Statements – Debt – MMJ Creditor Installment Payments.")

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Index to Consolidated Financial Statements



	Page

Consolidated Financial Statements as of August 28, 2014 and August 29, 2013 and for the fiscal years ended August 28, 2014, August 29, 2013 and August 30, 2012:

Consolidated Statements of Operations	47

Consolidated Statements of Comprehensive Income	48

Consolidated Balance Sheets	49

Consolidated Statements of Changes in Equity	50

Consolidated Statements of Cash Flows	51

Notes to Consolidated Financial Statements	52

Report of Independent Registered Public Accounting Firm	97

Financial Statement Schedules:

Schedule I – Condensed Financial Information of the Registrant	107

Schedule II – Valuation and Qualifying Accounts	113

MICRON TECHNOLOGY, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

(in millions except per share amounts)



For the year ended	August 28, 2014			August 29, 2013			August 30, 2012
Net sales	$	16,358		$	9,073		$	8,234
Cost of goods sold	10,921			7,226			7,266
Gross margin	5,437			1,847			968

Selling, general and administrative	707			562			620
Research and development	1,371			931			918
Restructure and asset impairments	40			126			10
Other operating (income) expense, net	232			(8		)	32
Operating income (loss)	3,087			236			(612		)

Gain on MMJ Acquisition	(33		)	1,484			—
Interest income	23			14			8
Interest expense	(352		)	(231		)	(179		)
Other non-operating income (expense), net	8			(218		)	29
	2,733			1,285			(754		)

Income tax (provision) benefit	(128		)	(8		)	17
Equity in net income (loss) of equity method investees	474			(83		)	(294		)
Net income (loss)	3,079			1,194			(1,031		)

Net income attributable to noncontrolling interests	(34		)	(4		)	(1		)
Net income (loss) attributable to Micron	$	3,045		$	1,190		$	(1,032	)

Earnings (loss) per share:
Basic	$	2.87		$	1.16		$	(1.04	)
Diluted	2.54			1.13			(1.04		)

Number of shares used in per share calculations:
Basic	1,060			1,022			991
Diluted	1,198			1,057			991

See accompanying notes to consolidated financial statements.

MICRON TECHNOLOGY, INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(in millions)



For the year ended	August 28, 2014		August 29, 2013		August 30, 2012
Net income (loss)	$	3,079	$	1,194	$	(1,031	)

Other comprehensive income (loss), net of tax:
Gain (loss) on derivatives, net